Electrical Engineering ⇒ Topic : Full Adder Circuits

Sunita
 
FULL ADDER CIRCUITS Contrary to the half adder circuit, full adder is meant to add two bits along with the carry from the former bit addition. When more than two binary digits are to be added, several half adders are inadequate because the half adder has no input to handle carries from the preceding addition. Consider the following binary summation
As shown earlier, the carries generated in each column must be considered during the addition process. Therefore, adder circuitry capable of adding the contents of two registers must include provision for handling carries as well as binary bits. So, there must be three inputs to each stage of multidigit adder except for the stage of the least significant bit. Table (1) shows the truth table for sum and carry Table (1)
Figure (2) shows the Kmap for sum and carry of Table (1). From Figure 2 (a), From Figure 2 (b),
From the above Kmap for the carry, it can be simplified to the following:
Now using these two boolean expressions for the sum and carry, we can design logic circuit for adding two bits as shown in Figure (3).
Figure (3) Full adder.  
 
!! OOPS Login [Click here] is required for more results / answer