Coilgun

"Gauss gun" redirects here. For fictional weapons of this type, see electromagnetic projectile devices (fiction).

Not to be confused with railgun.

Simplified diagram of a multistage coilgun with three coils, a barrel, and a ferromagnetic projectile

A coilgun is a type of projectile accelerator that consists of one or more coils used as electromagnets in the configuration of a synchronous linear motor which accelerate a magnetic projectile to high velocity. The name Gauss gun is sometimes used for such devices in reference to Carl Friedrich Gauss, who formulated mathematical descriptions of the magnetic effect used by magnetic accelerators.

Coilguns consist of one or more coils arranged along a barrel. The coils are switched on and off in sequence, causing the projectile to be accelerated quickly along the barrel via magnetic forces. Coilguns are distinct from railguns, which pass a large current through the projectile or sabot via sliding contacts. Coilguns and railguns also operate on different principles. The first operational coilgun was developed and patented by Norwegian physicist Kristian Birkeland.

In 1934 an American inventor developed a machine gun based similar in concept to the coilgun. Except for a photo in a few publications, very little is known about it.^[1]

Construction

A typical coilgun, as the name implies, consists of a coil of wire, an electromagnet, with a ferromagnetic projectile placed at one of its ends. Effectively a coilgun is a solenoid, a current-carrying coil which will draw a ferromagnetic object through its center. A large current is pulsed through the coil of wire and a strong magnetic field forms, pulling the projectile to the center of the coil. When the projectile nears this point the electromagnet is switched off and the next electromagnet can be switched on, progressively accelerating the projectile down successive stages. In common coilgun designs the "barrel" of the gun is made up of a track that the projectile rides on, with the driver into the magnetic coils around the track. Power is supplied to the electromagnet from some sort of fast discharge storage device, typically a battery or high-capacity high voltage capacitors designed for fast energy discharge. A diode is used to protect polarity sensitive components (such as semiconductors or electrolytic capacitors) from damage due to inverse polarity of the voltage after turning off the coil.

There are two main types or setups of a coilgun: single-stage and multistage. A single-stage coilgun uses one electromagnet to propel a projectile. A multistage coilgun uses several electromagnets in succession to progressively increase the speed of the projectile.

Typical single stage coilgun

Many hobbyists use low-cost rudimentary designs to experiment with coilguns, for example using photoflash capacitors from a disposable camera, or a capacitor from a standard cathode-ray tube television as the energy source, and a low inductance coil to propel the projectile forward.^[2][3]

Some designs have non-ferromagnetic projectiles, of such as aluminum or copper, with the armature of the projectile acting as an electromagnet with internal current induced by pulses of the acceleration coils.^[4][5] A superconducting coilgun called a quench gun could be created by successively quenching a line of adjacent coaxial superconducting coils forming a gun barrel, generating a wave of magnetic field gradient traveling at any desired speed. A traveling superconducting coil might be made to ride this wave like a surfboard. The device would be a mass driver or linear synchronous motor with the propulsion energy stored directly in the drive coils.^[6] Another method would have non-superconducting acceleration coils and propulsion energy stored outside of them but a projectile with superconducting magnets.^[7]

Though the cost of power switching and other factors can limit projectile energy, a notable benefit of some coilgun designs over simpler railguns is avoiding an intrinsic velocity limit from hypervelocity physical contact and erosion. By having the projectile pulled towards or levitated within the center of the coils as it is accelerated, no physical friction with the walls of the bore occurs. If the bore is a total vacuum (such as a tube with a plasma window) there is no friction at all which helps prolonged reusability.^[7][8]

Switching

One main obstacle in coilgun design is switching the power through the coils. There are several common solutions—the simplest (and probably least effective) is the spark gap, which releases the stored energy through the coil when the voltage reaches a certain threshold. A better option is to use solid-state switches; these include IGBTs or power MOSFETs (which can be switched off mid-pulse) and SCRs (which release all stored energy before turning off).^[9]

A quick-and-dirty method for switching, especially for those using a flash camera for the main components, is to use the flash tube itself as a switch. By wiring it in series with the coil, it can silently and non-destructively (assuming that the energy in the capacitor is kept below the tube's safe operating limits) allow a large amount of current to pass through to the coil. Like any flash tube, ionizing the gas in the tube with a high voltage triggers it. However, a large amount of the energy will be dissipated as heat and light, and, due to the tube being a spark gap, the tube will stop conducting once the voltage across it drops sufficiently, leaving some charge remaining on the capacitor.

A multistage coilgun

Resistance

The electrical resistance of the coils and the equivalent series resistance (ESR) of the current source are among other limits to the efficiency of a coilgun.

The magnetic circuit

Ideally, 100% of the magnetic flux generated by the coil would be delivered to and act on the projectile, but this is often far from the case due to the common air-core-solenoid / projectile construction of most coilguns, usually relatively simple designs made by hobbyists with low efficiency.

Since an air-cored solenoid is simply an inductor, the majority of the magnetic flux is not coupled into the projectile, instead being stored in the surrounding air. The energy that is stored in this field does not simply disappear from the magnetic circuit once the capacitor finishes discharging; much of it returns to the capacitor when the circuit's electric current is decreasing. As the coilgun circuit is inherently analogous to an LC oscillator, it does this in the reverse direction ('ringing'), which can seriously damage polarized capacitors such as electrolytic capacitors, which are far cheaper and smaller for a given capacity than other types.

The capacitor charging to a negative voltage can be prevented by placing a diode across the capacitor terminals; this diode and the coil must dissipate all of the stored energy as heat. While this is a simple and effective solution, it requires expensive high-power semiconductors, and a coil which will not overheat.

Some designs attempt to recover the energy stored in the magnetic field by using a pair of diodes. These diodes, instead of being forced to dissipate the remaining energy, recharge the capacitors with the right polarity to be used again for the next discharge cycle. This will also avoid the need to recharge the capacitors from zero, thus significantly reducing charge times.

In order to reduce component size, weight, durability requirements, and most importantly, cost, the magnetic circuit must be optimized to deliver more energy to the projectile per discharge cycle while still using the same energy input. This has been addressed to some extent by the use of end iron and back iron, which are pieces of magnetic material that enclose the coil and help reduce the reluctance of the magnetic circuit. The results of this vary widely, due to the use of materials ranging anywhere from magnetic steel to video tape. The inclusion of an additional piece of magnetic material in the magnetic circuit also magnifies the problems of flux saturation and other magnetic losses.

Ferromagnetic projectile saturation

Another significant limitation of the coilgun is the occurrence of ferromagnetic projectile saturation. When the flux in the projectile lies in the linear portion of its material's B(H) curve, the force applied to the core is proportional to the square of coil current (I)—the field (H) is linearly dependent on I, B is linearly dependent on H and force is linearly dependent on the product BI. This relationship continues until the core is saturated; once this happens B will only increase marginally with H (and thus with I), so force gain is linear. Since losses are proportional to I², increasing current beyond this point eventually decreases efficiency although it may increase the force. This puts an absolute limit on how much a given projectile can be accelerated with a single stage at acceptable efficiency.

Projectile magnetization and reaction time

Apart from saturation, the B(H) dependency often contains a hysteresis loop and the reaction time of the projectile material may be significant. The hysteresis means that the projectile becomes permanently magnetized and some energy will be lost as a permanent magnetic field of the projectile. The projectile reaction time, on the other hand, makes the projectile reluctant to respond to abrupt B changes; the flux will not rise as fast as desired while current is applied and a B tail will occur after the coil field has disappeared. This delay decreases the force, which would be maximized if the H and B were in phase.

Potential uses

A M934 mortar round is adapted for experimental coilgun launch with a conformal armature tail kit, to be fired through a barrel composed of short solenoidal electromagnets stacked end to end.

A large coilgun concept, a coaxial electromagnetic launcher firing projectiles to orbit.

Small coilguns are recreationally made by hobbyists, typically up to several joules to tens of joules projectile energy (the latter comparable muzzle energy to a typical air gun and an order of magnitude less than a firearm) while ranging from under one percent to several percent efficiency.^[10]

Much higher efficiency and energy can be obtained with designs of greater expense and sophistication. Bondaletov in 1978 in the USSR achieved record acceleration with a single stage by sending a 2-gram ring to 5000 m/s in 1 cm of length, but the most efficient modern designs tend to involve many stages.^[11] Above 90% efficiency is estimated for some vastly larger superconducting concepts for space launch.^[8] An experimental 45-stage DARPA coilgun mortar design is 22% efficient, with 1.6 megajoules KE delivered to a round.^[12]

Though facing the challenge of competitiveness versus conventional guns (and sometimes railgun alternatives), coilguns are being researched for weaponry.^[12]

The DARPA Electromagnetic Mortar program is an example of potential benefits, if practical challenges like sufficiently low weight can be managed. The coilgun would be relatively silent with no smoke giving away its position. (Though a coilgun projectile would still create a sonic boom if supersonic, mortars like such are subsonic). Adjustable yet smooth acceleration of the projectile throughout the barrel can allow somewhat higher velocity, with a predicted range increase of 30% for a 120mm EM mortar over the conventional version of similar length. With no separate propellant charges to load, the researchers envision the firing rate to approximately double.^[12][13]

In 2006, a 120mm prototype was under construction for evaluation, though time before reaching field deployment, if such occurs, was estimated then as 5 to 10+ years by Sandia National Laboratories.^[12][13] In 2011, development was proposed of an 81mm coilgun mortar to operate with a hybrid-electric version of the future Joint Light Tactical Vehicle.^[14][15]

Electromagnetic aircraft catapults are planned, including onboard future U.S. Gerald R. Ford class aircraft carriers. An experimental induction coilgun version of an Electromagnetic Missile Launcher (EMML) has been tested for launching Tomahawk missiles.^[16] A coilgun-based active defense system for tanks is under development at HIT in China.^[17]

Coilgun potential has been perceived as extending beyond military applications. Challenging and corresponding to a magnitude of capital investment that few entities could readily fund, gigantic coilguns with projectile mass and velocity on the scale of gigajoules of kinetic energy (as opposed to megajoules or less) have not been developed so far, but such have been proposed as launchers from the Moon or from Earth:

• An ambitious lunar-base proposal considered within a 1975 NASA study would have involved a 4000 ton coilgun sending 10 million tons of lunar material to L5 in support of massive space colonization (cumulatively over years, utilizing a large 9900-ton power plant).^[18]
• A 1992 NASA study calculated that a 330-ton lunar superconducting quenchgun could launch annually 4400 projectiles, each 1.5 tons and mostly liquid oxygen payload, using a relatively small amount of power, 350 kW average.^[19]
• After NASA Ames estimated how to meet aerothermal requirements for heat shields with terrestrial surface launch, Sandia National Laboratories investigated electromagnetic launchers to orbit, in addition to researching other EML applications, both railguns and coilguns. In 1990, a kilometer-long coilgun was proposed for launch of small satellites.^[20][21]
• Later investigations at Sandia included a 2005 study of the StarTram concept for an extremely long coilgun, one version conceived as launching passengers to orbit with survivable acceleration.^[22]

See also

Electromagnetism portal

• Mass driver
• Electromagnetic propulsion
• Edwin Fitch Northrup

References

1. ^ "Silent Machine Guns Are Fired By Electromagnets", June 1933, Popular Mechanics
2. ^ Compact Coilgun. Retrieved May 8, 2011.
3. ^ Coil Gun Kit Instructions From Disposable Camera. Retrieved May 8, 2011.
4. ^ MAGCAN1 - Magnetic High Impact Cannon. Retrieved May 8, 2011.
5. ^ Coilgun Technology at the Center for Electromechanics, the University of Texas at Austin. Retrieved May 8, 2011.
6. ^ "Electromagnetic Guns". http://www.coilgun.info/theorymath/electroguns.htm. Retrieved February 13, 2009. 
7. ^ ^{a b} StarTram. Retrieved May 8, 2011.
8. ^ ^{a b} Advanced Propulsion Study. Retrieved May 8, 2011.
9. ^ "Room 203 Technology". Coil Gun. http://philstechnologyblog.blogspot.com/. Retrieved October 20, 2007. 
10. ^ World's Coilgun Arsenal. Retrieved May 9, 2011.
11. ^ Multiple stage pulsed induction acceleration. Retrieved May 11, 2011.
12. ^ ^{a b c d} EM Mortar Technology Development for Indirect Fire. Retrieved May 9, 2011.
13. ^ ^{a b} Army Times: EM technology could revolutionize the mortar. Retrieved May 9, 2011
14. ^ National Defense Industrial Association: 46th Annual Gun & Missile Systems Conference. Retrieved May 9, 2011.
15. ^ Versatile Electromagnetic Mortar Launcher for the JLTV-B. Retrieved May 9, 2011.
16. ^ Sandia National Laboratories / Lockheed Martin Electromagnetic Missile Launcher. Retrieved May 9, 2011
17. ^ IEEE Spectrum, July 2007. Retrieved May 11, 2011.
18. ^ Space Settlements: A Design Study. Retrieved May 9, 2011.
19. ^ NASA SP-509, Electromagnetic Launch of Lunar Material. Retrieved May 9, 2011.
20. ^ L5 News, September 1980. Retrieved May 9, 2011.
21. ^ Lab Says Electromagnetism Could Launch Satellites. Retrieved May 9, 2011.
22. ^ Transformational Technologies to Expedite Space Access. Retrieved May 9, 2011.

External links

• Coilgun at the Open Directory Project
• Coilgun Information and Project Gallery
• coilgun.info