Hydrogen chloride

Hydrogen chloride
Hydrogen chloride
CAS number 7647-01-0 YesY
PubChem 313
ChemSpider 307 YesY
EC number 231-595-7
UN number 1050
KEGG D02057 YesY
MeSH Hydrochloric+acid
ChEBI CHEBI:17883 YesY
RTECS number MW4025000
ATC code A09AB03,B05XA13
Beilstein Reference 1098214
Gmelin Reference 322
Jmol-3D images Image 1
Molecular formula HCl
Molar mass 36.46 g mol−1
Exact mass 35.976677739 g mol−1
Appearance Colorless gas
Density 1.490 g L−3[2]
Melting point

-112 °C, 161 K, -170 °F

Boiling point

-85 °C, 188 K, -121 °F

Solubility in water 720 g L−1 (at 20 °C)
Vapor pressure 4352 kPa (at 21.1 °C)[3]
Acidity (pKa) –7.0[4]
Basicity (pKb) 21.0
Molecular shape linear
Dipole moment 1.05 D
Std enthalpy of
–92.31 kJ mol−1
Std enthalpy of
–95.31 kJ mol−1
Standard molar
186.902 J K−1 mol−1
Specific heat capacity, C 0.7981 J K−1 g−1
GHS pictograms The corrosion pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) The skull-and-crossbones pictogram in the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)
GHS signal word Danger
GHS hazard statements H280, H314, H331
GHS precautionary statements P261, P280, P305+351+338, P310, P410+403
EU Index 017-002-00-2
EU classification Toxic T Corrosive C
R-phrases R23, R35
S-phrases (S1/2), S9, S26, S36/37/39, S45
NFPA 704
NFPA 704.svg
Related compounds
Related compounds Hydrogen fluoride

Hydrogen bromide
Hydrogen iodide

 N chloride (verify) (what is: YesY/N?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

The compound hydrogen chloride has the formula HCl. At room temperature, it is a colorless gas, which forms white fumes of hydrochloric acid upon contact with atmospheric humidity. Hydrogen chloride gas and hydrochloric acid are important in technology and industry. The formula HCl is often used to refer, somewhat misleadingly, to hydrochloric acid, an aqueous solution that can be derived from hydrogen chloride.



Hydrochloric acid fumes turning pH paper red showing that the fumes are acidic

Hydrogen chloride is composed of diatomic molecules, each consisting of a hydrogen atom H and a chlorine atom Cl connected by a covalent single bond. Since the chlorine atom is much more electronegative than the hydrogen atom, the covalent bond between the two atoms is quite polar. Consequently, the molecule has a large dipole moment with a negative partial charge δ at the chlorine atom and a positive partial charge δ+ at the hydrogen atom. In part because of its high polarity, HCl is very soluble in water (and in other polar solvents).

Upon contact, H2O and HCl combine to form hydronium cations H3O+ and chloride anions Cl through a reversible chemical reaction:

HCl + H2O → H3O+ + Cl

The resulting solution is called hydrochloric acid and is a strong acid. The acid dissociation or ionization constant, Ka, is large, which means HCl dissociates or ionizes practically completely in water. Even in the absence of water, hydrogen chloride can still act as an acid. For example, hydrogen chloride can dissolve in certain other solvents such as methanol, protonate molecules or ions, and serve as an acid-catalyst for chemical reactions where anhydrous (water-free) conditions are desired.

HCl + CH3OH → CH3O+H2 + Cl

Because of its acidic nature, hydrogen chloride is corrosive, particularly in the presence of moisture.

Structure and properties

The structure of DCl, as determined by neutron diffraction of DCl powder at 77 K. DCl was used instead of HCl because the deuterium nucleus is easier to detect than the hydrogen nucleus. The "infinite" chains of DCl are indicated by the dashed lines.

Frozen HCl undergoes a phase transition at 98.4 K. X-ray powder diffraction of the frozen material shows that the material changes from an orthorhombic structure to a cubic one during this transition. In both structures the chlorine atoms are in a face-centered array. However, the hydrogen atoms could not be located.[5] Analysis of spectroscopic and dielectric data, and determination of the structure of DCl indicates that HCl forms zigzag chains in the solid, as does HF (see figure on right).[6]

Infrared (IR) absorption spectrum
One doublet in the IR spectrum resulting from the isotopic composition of chlorine.

The infrared spectrum of gaseous hydrogen chloride, shown below, consists of a number of sharp absorption lines grouped around 2886 cm−1 (wavelength ~3.47 µm). At room temperature, almost all molecules are in the ground vibrational state v = 0. To promote an HCl molecule to the v = 1 state, we would expect to see an infrared absorption about 2880 cm−1. This absorption corresponding to the Q-branch is not observed due to it being forbidden by symmetry. Instead, two sets of signals (P- and R-branches) are seen owing to rotation of the molecules. Because of quantum mechanical rules, only certain rotational modes are permitted. They are characterized by the rotational quantum number J = 0, 1, 2, 3, ... ΔJ can only take values of ± 1.

E(J) = h·B·J(J+1)

The value of B is much smaller than ν e, such that a much smaller amount of energy is required to rotate the molecule; for a typical molecule, this lies within the microwave region. However, the vibrational energy of HCl molecule places its absorptions within the infrared region, allowing a spectrum showing the rovibrational modes of this molecule to be easily collected using an ordinary infrared spectrometer with a conventional gas cell.

Naturally abundant chlorine consists of two isotopes, 35Cl and 37Cl, in a ratio of approximately 3:1. While the spring constants are very similar, the reduced masses are different causing significant differences in the rotational energy, thus doublets are observed on close inspection of each absorption line, weighted in the same ratio of 3:1.


Most hydrogen chloride produced on an industrial scale is used for hydrochloric acid production.

Direct synthesis

Flame inside HCl Oven.

In the chlor-alkali industry, brine (mixture of sodium chloride and water) solution is electrolyzed producing chlorine (Cl2), sodium hydroxide, and hydrogen (H2). The pure chlorine gas can be combined with hydrogen to produce hydrogen chloride.

Cl2 + H2 → 2 HCl

As the reaction is exothermic, the installation is called an HCl oven or HCl burner. The resulting hydrogen chloride gas is absorbed in deionized water, resulting in chemically pure hydrochloric acid. This reaction can give a very pure product, e.g. for use in the food industry.

Organic synthesis

The largest production of hydrochloric acid is integrated with the formation of chlorinated and fluorinated organic compounds, e.g., Teflon, Freon, and other CFCs, as well as chloroacetic acid, and PVC. Often this production of hydrochloric acid is integrated with captive use of it on-site. In the chemical reactions, hydrogen atoms on the hydrocarbon are replaced by chlorine atoms, whereupon the released hydrogen atom recombines with the spare atom from the chlorine molecule, forming hydrogen chloride. Fluorination is a subsequent chlorine-replacement reaction, producing again hydrogen chloride.

R-H + Cl2 → R-Cl + HCl
R-Cl + HF → R-F + HCl

The resulting hydrogen chloride gas is either reused directly, or absorbed in water, resulting in hydrochloric acid of technical or industrial grade.

Laboratory methods

Small amounts of HCl gas for laboratory use can be generated in a HCl generator by dehydrating hydrochloric acid with either sulfuric acid or anhydrous calcium chloride. Alternatively, HCl can be generated by the reaction of sulfuric acid with sodium chloride:[7]

NaCl + H2SO4 → NaHSO4 + HCl

This reaction occurs at room temperature. Provided there is salt remaining in the generator and it is heated above 200 degrees Celsius, the reaction proceeds to;

NaCl + NaHSO4 → HCl + Na2SO4

For such generators to function, the reagents should be dry.

HCl can also be prepared by the hydrolysis of certain reactive chloride compounds such as phosphorus chlorides, thionyl chloride (SOCl2), and acyl chlorides. For example, cold water can be gradually dripped onto phosphorus pentachloride (PCl5) to give HCl in this reaction:

PCl5 + H2O → POCl3 + 2 HCl

High purity streams of the gas require lecture bottles or cylinders, both of which can be expensive. In comparison, the use of a generator requires only apparatus and materials commonly available in a laboratory.


Most hydrogen chloride is used in the production of hydrochloric acid. It is also an important reagent in other industrial chemical transformations, e.g.:

  • Hydrochlorination of rubber
  • Production of vinyl and alkyl chlorides

In the semiconductor industry, it is used to both etch semiconductor crystals and to purify silicon via trichlorosilane (SiHCl3).

It may also be used to treat cotton to delint it, and to separate it from wool.[citation needed]

In the laboratory, anhydrous forms of the gas are particularly useful for generating chloride-based Lewis acids, which must be absolutely dry for their Lewis sites to function. It can also be used to dry the corresponding hydrated forms of these materials by passing it over as they are heated; the materials would otherwise fume HCl(g) themselves and decompose. Neither can these hydrates be dried using standard desiccator methods.


Alchemists of the Middle Ages recognized that hydrochloric acid (then known as spirit of salt or acidum salis) released vaporous hydrogen chloride, which was called marine acid air. In the 17th century, Johann Rudolf Glauber used salt (sodium chloride) and sulfuric acid for the preparation of sodium sulfate, releasing hydrogen chloride gas (see production, below). In 1772, Carl Wilhelm Scheele also reported this reaction and is sometimes credited with its discovery. Joseph Priestley prepared hydrogen chloride in 1772, and in 1810 Humphry Davy established that it is composed of hydrogen and chlorine.[8]

During the Industrial Revolution, demand for alkaline substances such as soda ash increased, and Nicolas Leblanc developed a new industrial-scale process for producing the soda ash. In the Leblanc process, salt was converted to soda ash, using sulfuric acid, limestone, and coal, giving hydrogen chloride as by-product. Initially, this gas was vented to air, but the Alkali Act of 1863 prohibited such release, so then soda ash producers absorbed the HCl waste gas in water, producing hydrochloric acid on an industrial scale. Later, the Hargreaves process was developed, which is similar to the Leblanc process except sulfur dioxide, water, and air are used instead of sulfuric acid in a reaction which is exothermic overall. In the early 20th century the Leblanc process was effectively replaced by the Solvay process, which did not produce HCl. However, hydrogen chloride production continued as a step in hydrochloric acid production.

Historical uses of hydrogen chloride in the 20th century include hydrochlorinations of alkynes in producing the chlorinated monomers chloroprene and vinyl chloride, which are subsequently polymerized to make polychloroprene (Neoprene) and polyvinyl chloride (PVC), respectively. In the production of vinyl chloride, acetylene (C2H2) is hydrochlorinated by adding the HCl across the triple bond of the C2H2 molecule, turning the triple into a double bond, yielding vinyl chloride.

The "acetylene process", used until the 1960s for making chloroprene, starts out by joining two acetylene molecules, and then adds HCl to the joined intermediate across the triple bond to convert it to chloroprene as shown here:

Chloroprene synthesis.svg

This "acetylene process" has been replaced by a process which adds Cl2 to one of the double bonds in 1,3-butadiene instead, and subsequent elimination produces HCl instead, as well as chloroprene.


Hydrogen chloride forms corrosive hydrochloric acid on contact with water found in body tissue. Inhalation of the fumes can cause coughing, choking, inflammation of the nose, throat, and upper respiratory tract, and in severe cases, pulmonary edema, circulatory system failure, and death. Skin contact can cause redness, pain, and severe skin burns. Hydrogen chloride may cause severe burns to the eye and permanent eye damage.

The gas, being strongly hydrophilic, can be easily scrubbed from the exhaust gases of a reaction by bubbling it through water, producing useful hydrochloric acid as a byproduct.

Any equipment handling hydrogen chloride gas must be checked on a routine basis; particularly valve stems and regulators. The gas requires the use of specialized materials on all whetted parts of the flow path, as it will interact with or corrode numerous materials hydrochloric acid alone will not; such as stainless and regular polymers.

See also


  1. ^ "hydrogen chloride (CHEBI:17883)". Chemical Entities of Biological Interest (ChEBI). UK: European Bioinformatics Institute. https://www.ebi.ac.uk/chebi/searchId.do?chebiId=17883. 
  2. ^ Haynes, William M. (2010). Handbook of Chemistry and Physics (91 ed.). Boca Raton, Florida: CRC Press. p. 4–67. ISBN 978-1439820773. 
  3. ^ Hydrogen Chloride. Gas Encyclopaedia. Air Liquide
  4. ^ Perrin, D. D. Dissociation constants of inorganic acids and bases in aqueous solution. Butterworths, London, 1969.
  5. ^ Natta, G. (1933). "Struttura e polimorfismo degli acidi alogenidrici" (in Italian). Gazzetta Chimica Italiana 63: 425–439. 
  6. ^ Sándor, E.; Farrow, R. F. C. (1967). "Crystal Structure of Solid Hydrogen Chloride and Deuterium Chloride". Nature 213 (5072): 171–172. doi:10.1038/213171a0. 
  7. ^ Francisco J. Arnsliz (1995). "A Convenient Way To Generate Hydrogen Chloride in the Freshman Lab". J. Chem. Ed. 72 (12): 1139. doi:10.1021/ed072p1139. http://jchemed.chem.wisc.edu/journal/Issues/1995/Dec/abs1139.html. 
  8. ^ Hartley, Harold (1960). "The Wilkins Lecture. Sir Humphry Davy, Bt., P.R.S. 1778–1829". Proceedings of the Royal Society of London (A) 255 (1281): 153–180. Bibcode 1960RSPSA.255..153H. doi:10.1098/rspa.1960.0060. 

External Links

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • hydrogen chloride — n a colorless pungent poisonous gas HCl that fumes in moist air and yields hydrochloric acid when dissolved in water * * * a corrosive inorganic acid, HCl; see hydrochloric acid …   Medical dictionary

  • hydrogen chloride — a colorless gas, HCl, having a pungent odor: the anhydride of hydrochloric acid. [1865 70] * * * ▪ chemical compound       (HCl), a compound of the elements hydrogen and chlorine, a gas at room temperature and pressure. A solution of the gas in… …   Universalium

  • hydrogen chloride — vandenilio chloridas statusas T sritis chemija formulė HCl atitikmenys: angl. hydrochloric acid; hydrogen chloride rus. водорода хлорид; хлороводород …   Chemijos terminų aiškinamasis žodynas

  • hydrogen chloride — /haɪdrədʒən ˈklɔraɪd/ (say huydruhjuhn klawruyd) noun a colourless, poisonous gas, HCl, obtained by burning hydrogen in chlorine …  

  • hydrogen chloride — noun a colorless corrosive gas (HCl) • Hypernyms: ↑acid * * * noun : a colorless pungent nonflammable poisonous gas HCl that fumes strongly in moist air and yields hydrochloric acid when dissolved in water and that is obtained primarily as a by… …   Useful english dictionary

  • hydrogen chloride — noun Date: 1869 a colorless pungent poisonous gas HCl that fumes in moist air and yields hydrochloric acid when dissolved in water …   New Collegiate Dictionary

  • hydrogen chloride — noun An inorganic compound with the formula HCl. Forms hydrochloric acid when dissolved in water …   Wiktionary

  • hydrogen chloride — hy′drogen chlo′ride n. chem. a colorless gas, HCl, having a pungent odor: the anhydride of hydrochloric acid • Etymology: 1865–70 …   From formal English to slang

  • hydrogen — /huy dreuh jeuhn/, n. a colorless, odorless, flammable gas that combines chemically with oxygen to form water: the lightest of the known elements. Symbol: H; at. wt.: 1.00797; at. no.: 1; density: 0.0899 g/l at 0°C and 760 mm pressure. [1785 95;… …   Universalium

  • Hydrogen — This article is about the chemistry of hydrogen. For the physics of atomic hydrogen, see Hydrogen atom. For other meanings, see Hydrogen (disambiguation). ← hydrogen → helium …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”