# Molar mass

Molar mass

Molar mass, symbol M, is a physical property of a given substance (chemical element or chemical compound), namely its mass per amount of substance. The base SI unit for mass is the kilogram and that for amount of substance is the mole. Thus, the derived unit for molar mass is kg/mol. However, for both practical and historical reasons, molar masses are almost always quoted in grams per mole (g/mol or g mol−1), especially in chemistry.

Molar mass is closely related to the relative molar mass (M
r
) of a compound, the older term formula weight and to the standard atomic masses of its constituent elements. However, it should be distinguished from the molecular mass (also known as molecular weight), which is the mass of one molecule (of any single isotopic composition) and is not directly related to the atomic mass, the mass of one atom (of any single isotope). The dalton, symbol Da, is also sometimes used as a unit of molar mass, especially in biochemistry, with the definition 1 Da = 1 g/mol, despite the fact that it is strictly a unit of mass (1 Da = 1.660 538 782(83)×10−27 kg).

Molar masses are almost never measured directly. They may be calculated from standard atomic masses, and are often listed in chemical catalogues and on material safety data sheets (MSDS). Molar masses typically vary between:

1–238 g/mol for atoms of naturally-occurring elements;
10–1000 g/mol for simple chemical compounds;
1000–5,000,000 g/mol for polymers, proteins, DNA fragments, etc.

## Molar masses of elements

The molar mass of atoms of an element is given by the atomic weight of the element multiplied by the molar mass constant, M
u
= 1×10−3 kg/mol = 1 g/mol:

M(H) = 1.007 97(7) × 1 g/mol = 1.007 97(7) g/mol
M(S) = 32.065(5) × 1 g/mol = 32.065(5) g/mol
M(Cl) = 35.453(2) × 1 g/mol = 35.453(2) g/mol
M(Fe) = 55.845(2) × 1 g/mol = 55.845(2) g/mol.

Multiplying by the molar mass constant ensures that the calculation is dimensionally correct: atomic weights are dimensionless quantities (i.e., pure numbers) whereas molar masses have units (in this case, grams/mole).

Some elements are usually encountered as molecules, e.g. hydrogen (H
2
), sulfur (S
8
), chlorine (Cl
2
). The molar mass of molecules of these elements is the molar mass of the atoms multiplied by the number of atoms in each molecule:

M(H
2
) = 2 × 1.007 97(7) × 1 g/mol = 2.015 88(14) g/mol
M(S
8
) = 8 × 32.065(5) × 1 g/mol = 256.52(4) g/mol
M(Cl
2
) = 2 × 35.453(2) × 1 g/mol = 70.906(4) g/mol.

## Molar masses of compounds

The molar mass of a compound is given by the sum of the standard atomic weights of the atoms which form the compound multiplied by the molar mass constant, M
u
:

M(NaCl) = [22.989 769 28(2) + 35.453(2)] × 1 g/mol = 58.443(2) g/mol
M(C
12
H
22
O
11
) = ([12 × 12.0107(8)] + [22 ×1.007 94(7)] + [11 ×15.9994(3)]) × 1 g/mol = 342.297(14) g/mol.

An average molar mass may be defined for mixtures of compounds. This is particularly important in polymer science, where different polymer molecules may contain different numbers of monomer units (non-uniform polymers).

## Average molar mass of mixtures

The average molar mass of mixtures $\bar{M}$ can be calculated from the mole fractions xi of the components and their molar masses Mi: $\bar{M} = \sum_i x_i M_i \,$

It can also be calculated from the mass fractions wi of the components: $1/\bar{M} = \sum_i \frac{{w_i}}{{M_i}} ,$

As an example, the average molar mass of dry air is 28.97 g/mol.

## Related properties

Molecular weight (M.W.) and formula weight (F.W.) are older terms for what is now more correctly called the relative molar mass (M
r
). This is a dimensionless quantity (i.e., a pure number, without units) equal to the molar mass divided by the molar mass constant.

### Molecular mass

The molecular mass (m) is the mass of a given molecule: it is measured in daltons (Da) or atomic mass units (u), where 1 Da = 1 u = 1.660 538 782(83)×10−27 kg). Different molecules of the same compound may have different molecular masses because they contain different isotopes of an element. The molar mass is a measure of the average molecular mass of all the molecules in a sample, and is usually the more appropriate measure when dealing with macroscopic (weighable) quantities of a substance.

Molecular masses are calculated from the relative atomic masses of each nuclide, while molar masses are calculated from the atomic weights of each element. The atomic weight takes into account the isotopic distribution of the element in a given sample (usually assumed to be "normal"). For example, water has a molar mass of 18.0153(3) g/mol, but individual water molecules have molecular masses which range between 18.010 564 6863(15) u (1H
2
16O) and 22.027 7364(9) u (D
2
18O).

The distinction between molar mass and molecular mass is important because relative molecular masses can be measured directly by mass spectrometry, often to a precision of a few parts per million. This is accurate enough to directly determine the chemical formula of a molecule.

### DNA synthesis usage

The term formula weight (F.W.) has a specific meaning when used in the context of DNA synthesis: whereas an individual phosphoramidite nucleobase to be added to a DNA polymer has protecting groups and has its molecular weight quoted including these groups, the amount of molecular weight that is ultimately added by this nucleobase to a DNA polymer is referred to as the nucleobase's formula weight (i.e., the molecular weight of this nucleobase within the DNA polymer, minus protecting groups).

## Precision and uncertainties

The precision to which a molar mass is known depends on the precision of the atomic weights from which it was calculated. Most atomic weights are known to a precision of at least one part in ten-thousand, often much better (the atomic weight of lithium is a notable, and serious, exception). This is adequate for almost all normal uses in chemistry: it is more precise than most chemical analyses, and exceeds the purity of most laboratory reagents.

The precision of atomics weights, and hence of molar masses, is limited by the knowledge of the isotopic distribution of the element. If a more accurate value of the molar mass is required, it is necessary to determine the isotopic distribution of the sample in question, which may be different from the standard distribution used to calculate the standard atomic weight. The isotopic distributions of the different elements in a sample are not necessarily independent of one another: for example, a sample which has been distilled will be enriched in the lighter isotopes of all the elements present. This complicates the calculation of the standard uncertainty in the molar mass.

A useful convention for normal laboratory work is to quote molar masses to two decimal places for all calculations. This is more accurate than is usually required, but avoids rounding errors during calculations. When the molar mass is greater than 1000 g/mol, it is rarely appropriate to use more than one decimal place. These conventions are followed in most tabulated values of molar masses.

## Measurement

While molar masses are almost always, in practice, calculated from atomic weights, they can also be measured in certain cases. Such measurements are much less precise than modern mass spectrometric measurements of atomic weights and molecular masses, and are of mostly historical interest. All of the procedures rely on colligative properties, and any dissociation of the compound must be taken into account.

### Vapour density

The measurement of molar mass by vapour density relies on the principle, first enounced by Amadeo Avogadro, that equal volumes of gases under identical conditions contain equal numbers of particles. This principle is included in the ideal gas equation: $pV = nRT\$

where n is the amount of substance. The vapour density (ρ) is given by $\rho = {{nM}\over{V}}.\$

Combining these two equations gives an expression for the molar mass in terms of the vapour density for conditions of known pressure and temperature. $M = {{RT\rho}\over{p}}\$

### Freezing-point depression

The freezing point of a solution is lower than that of the pure solvent, and the freezing-point depression (ΔT) is directly proportional to the amount concentration for dilute solutions. When the amount concentration is expressed as a molality, the proportionality constant is known as the cryoscopic constant (K
f
) and is characteristic for each solvent. If w represents the mass fraction of the solute in solution, and assuming no dissociation of the solute, the molar mass is given by $M = {{wK_f}\over{\Delta T}}.\$

### Boiling-point elevation

The boiling point of a solution of an involatile solute is higher than that of the pure solvent, and the boiling-point elevation (ΔT) is directly proportional to the amount concentration for dilute solutions. When the amount concentration is expressed as a molality, the proportionality constant is known as the ebullioscopic constant (K
b
) and is characteristic for each solvent. If w represents the mass fraction of the solute in solution, and assuming no dissociation of the solute, the molar mass is given by $M = {{wK_b}\over{\Delta T}}.\$

Wikimedia Foundation. 2010.

### Look at other dictionaries:

• molar mass — molio masė statusas T sritis Standartizacija ir metrologija apibrėžtis Medžiagos dalelių, kurių skaičius lygus Avogadro konstantai, masė, t. y. masė m, padalyta iš medžiagos kiekio n: M = m/n. atitikmenys: angl. molar mass vok. molare Masse, f;… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

• molar mass — molinė masė statusas T sritis chemija apibrėžtis Vieno medžiagos molio masė. atitikmenys: angl. molar mass rus. молярная масса …   Chemijos terminų aiškinamasis žodynas

• molar mass — molio masė statusas T sritis fizika atitikmenys: angl. molar mass vok. molare Masse, f; Molmasse, f rus. мольная масса, f; молярная масса, f pranc. masse molaire, f …   Fizikos terminų žodynas

• molar mass — molio masė statusas T sritis Energetika apibrėžtis Medžiagos dalelių, kurių skaičius lygus Avogadro konstantai, masė, t. y. medžiagos masė, padalyta iš medžiagos kiekio. atitikmenys: angl. molar mass vok. molare Masse, f; Molmasse, f rus.… …   Aiškinamasis šiluminės ir branduolinės technikos terminų žodynas

• molar mass — (M) the mass of a molecule in grams (or kilograms) per mole, derived by addition of the sum of the component atomic masses. Its dimensionless equivalent is molecular weight …   Medical dictionary

• Molar mass distribution — In linear polymers the individual polymer chains rarely have exactly the same degree of polymerization and molar mass, and there is always a distribution around an average value. The molar mass distribution (or molecular weight distribution) in a …   Wikipedia

• Molar mass constant — The molar mass constant, symbol Mu, is a physical constant which relates atomic weight and molar mass. Its value is defined to be 1 g/mol in SI units. The molar mass constant is important in writing dimensionally correct equations. It is… …   Wikipedia

• molar mass of equivalents — ekvivalentų molio masė statusas T sritis Standartizacija ir metrologija apibrėžtis Medžiagos molio masės ir ekvivalentinio daugiklio sandauga. atitikmenys: angl. equivalent weight; molar mass of equivalents rus. мольная масса эквивалентов, f;… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

• molar mass of equivalents — ekvivalentų molinė masė statusas T sritis chemija apibrėžtis Medžiagos molinės masės ir ekvivalentinio daugiklio sandauga. atitikmenys: angl. equivalent weight; molar mass of equivalents rus. мольная масса эквивалентов …   Chemijos terminų aiškinamasis žodynas

• Absolute molar mass — is a process to determine the characteristics of molecules. TOC History The first absolute measurements (i.e. made without reference to standards) were based on fundamental physical characteristics and their relation to the molar mass. The most… …   Wikipedia

### Share the article and excerpts

##### Direct link
Do a right-click on the link above
and select “Copy Link”