 Resonance

This article is about resonance in physics. For other uses, see Resonance (disambiguation)."Resonant" redirects here. For the phonological term, see Sonorant.
In physics, resonance is the tendency of a system to oscillate at a greater amplitude at some frequencies than at others. These are known as the system's resonant frequencies (or resonance frequencies). At these frequencies, even small periodic driving forces can produce large amplitude oscillations, because the system stores vibrational energy.
Resonance occurs when a system is able to store and easily transfer energy between two or more different storage modes (such as kinetic energy and potential energy in the case of a pendulum). However, there are some losses from cycle to cycle, called damping. When damping is small, the resonant frequency is approximately equal to the natural frequency of the system, which is a frequency of unforced vibrations. Some systems have multiple, distinct, resonant frequencies.
Resonance phenomena occur with all types of vibrations or waves: there is mechanical resonance, acoustic resonance, electromagnetic resonance, nuclear magnetic resonance (NMR), electron spin resonance (ESR) and resonance of quantum wave functions. Resonant systems can be used to generate vibrations at a specific frequency (e.g. musical instruments), or pick out specific frequencies from a complex vibration containing many frequencies (e.g. filters).
Resonance was recognized by Galileo Galilei with his investigations of pendulums and musical strings beginning in 1602.^{[3]}^{[4]}
Contents
Examples
One familiar example is a playground swing, which acts as a pendulum. Pushing a person in a swing in time with the natural interval of the swing (its resonant frequency) will make the swing go higher and higher (maximum amplitude), while attempts to push the swing at a faster or slower tempo will result in smaller arcs. This is because the energy the swing absorbs is maximized when the pushes are 'in phase' with the swing's oscillations, while some of the swing's energy is actually extracted by the opposing force of the pushes when they are not.
Resonance occurs widely in nature, and is exploited in many manmade devices. It is the mechanism by which virtually all sinusoidal waves and vibrations are generated. Many sounds we hear, such as when hard objects of metal, glass, or wood are struck, are caused by brief resonant vibrations in the object. Light and other short wavelength electromagnetic radiation is produced by resonance on an atomic scale, such as electrons in atoms. Other examples are:
 the timekeeping mechanisms of all modern clocks and watches: the balance wheel in a mechanical watch and the quartz crystal in a quartz watch
 the tidal resonance of the Bay of Fundy
 acoustic resonances of musical instruments and human vocal cords
 the shattering of a crystal wineglass when exposed to a musical tone of the right pitch (its resonant frequency)
 electrical resonance of tuned circuits in radios and TVs that allow individual stations to be picked up
Orbital resonance in astronomy
 orbital resonance as exemplified by some moons of the solar system's gas giants
Atomic, particle, and molecular resonance
 material resonances in atomic scale are the basis of several spectroscopic techniques that are used in condensed matter physics.
 Nuclear Magnetic Resonance
 Mössbauer effect
 Electron Spin Resonance.
Theory
The exact response of a resonance, especially for frequencies far from the resonant frequency, depends on the details of the physical system, and is usually not exactly symmetric about the resonant frequency, as illustrated for the simple harmonic oscillator above. For a lightly damped linear oscillator with a resonant frequency Ω, the intensity of oscillations I when the system is driven with a driving frequency ω is typically approximated by a formula that is symmetric about the resonant frequency:^{[5]}
The intensity is defined as the square of the amplitude of the oscillations. This is a Lorentzian function, and this response is found in many physical situations involving resonant systems. Γ is a parameter dependent on the damping of the oscillator, and is known as the linewidth of the resonance. Heavily damped oscillators tend to have broad linewidths, and respond to a wider range of driving frequencies around the resonant frequency. The linewidth is inversely proportional to the Q factor, which is a measure of the sharpness of the resonance.
In electrical engineering, this approximate symmetric response is known as the universal resonance curve, a concept introduced by Frederick E. Terman in 1932 to simplify the approximate analysis of radio circuits with a range of center frequencies and Q values.^{[6]}^{[7]}
Resonators
A physical system can have as many resonant frequencies as it has degrees of freedom; each degree of freedom can vibrate as a harmonic oscillator. Systems with one degree of freedom, such as a mass on a spring, pendulums, balance wheels, and LC tuned circuits have one resonant frequency. Systems with two degrees of freedom, such as coupled pendulums and resonant transformers can have two resonant frequencies. As the number of coupled harmonic oscillators grows, the time it takes to transfer energy from one to the next becomes significant. The vibrations in them begin to travel through the coupled harmonic oscillators in waves, from one oscillator to the next.
Extended objects that experience resonance due to vibrations inside them are called resonators, such as organ pipes, vibrating strings, quartz crystals, microwave cavities, and laser rods. Since these can be viewed as being made of millions of coupled moving parts (such as atoms), they can have millions of resonant frequencies. The vibrations inside them travel as waves, at an approximately constant velocity, bouncing back and forth between the sides of the resonator. If the distance between the sides is , the length of a round trip is . In order to cause resonance, the phase of a sinusoidal wave after a round trip has to be equal to the initial phase, so the waves will reinforce. So the condition for resonance in a resonator is that the round trip distance, , be equal to an integer number of wavelengths of the wave:
If the velocity of a wave is , the frequency is so the resonant frequencies are:
So the resonant frequencies of resonators, called normal modes, are equally spaced multiples of a lowest frequency called the fundamental frequency. The multiples are often called overtones. There may be several such series of resonant frequencies, corresponding to different modes of vibration.
Q factor
Main article: Q factorThe quality factor or Q factor is a dimensionless parameter that describes how underdamped an oscillator or resonator is,^{[8]} or equivalently, characterizes a resonator's bandwidth relative to its center frequency.^{[9]} Higher Q indicates a lower rate of energy loss relative to the stored energy of the oscillator, i.e. the oscillations die out more slowly. A pendulum suspended from a highquality bearing, oscillating in air, has a high Q, while a pendulum immersed in oil has a low Q. Oscillators with high quality factors have low damping which tends to make them ring longer.
Sinusoidally driven resonators having higher Q factors resonate with greater amplitudes (at the resonant frequency) but have a smaller range of frequencies around the frequency at which they resonate. The range of frequencies at which the oscillator resonates is called the bandwidth. Thus, a high Q tuned circuit in a radio receiver would be more difficult to tune, but would have greater selectivity, it would do a better job of filtering out signals from other stations that lie nearby on the spectrum. High Q oscillators operate over a smaller range of frequencies and are more stable. (See oscillator phase noise.)
The quality factor of oscillators vary substantially from system to system. Systems for which damping is important (such as dampers keeping a door from slamming shut) have Q = ½. Clocks, lasers, and other systems that need either strong resonance or high frequency stability need high quality factors. Tuning forks have quality factors around Q = 1000. The quality factor of atomic clocks and some highQ lasers can reach as high as 10^{11}^{[10]} and higher.^{[11]}
There are many alternate quantities used by physicists and engineers to describe how damped an oscillator is that are closely related to its quality factor. Important examples include: the damping ratio, relative bandwidth, linewidth and bandwidth measured in octaves.
Types of resonance
Mechanical and acoustic resonance
Main articles: Mechanical resonance, Acoustic resonance, and String resonanceMechanical resonance is the tendency of a mechanical system to absorb more energy when the frequency of its oscillations matches the system's natural frequency of vibration than it does at other frequencies. It may cause violent swaying motions and even catastrophic failure in improperly constructed structures including bridges, buildings, trains, and aircraft. When designing objects, Engineers must ensure the mechanical resonant frequencies of the component parts do not match driving vibrational frequencies of motors or other oscillating parts, a phenomenon known as resonance disaster.
Avoiding resonance disasters is a major concern in every building, tower and bridge construction project. As a countermeasure, shock mounts can be installed to absorb resonant frequencies and thus dissipate the absorbed energy. The Taipei 101 building relies on a 660tonne pendulum (730shortton) — a tuned mass damper — to cancel resonance. Furthermore, the structure is designed to resonate at a frequency which does not typically occur. Buildings in seismic zones are often constructed to take into account the oscillating frequencies of expected ground motion. In addition, engineers designing objects having engines must ensure that the mechanical resonant frequencies of the component parts do not match driving vibrational frequencies of the motors or other strongly oscillating parts.
Many clocks keep time by mechanical resonance in a balance wheel, pendulum, or quartz crystal
Acoustic resonance is a branch of mechanical resonance that is concerned with the mechanical vibrations across the frequency range of human hearing, in other words sound. For humans, hearing is normally limited to frequencies between about 20 Hz and 20,000 Hz (20 kHz),^{[12]}
Acoustic resonance is an important consideration for instrument builders, as most acoustic instruments use resonators, such as the strings and body of a violin, the length of tube in a flute, and the shape of, and tension on, a drum membrane.
Like mechanical resonance, acoustic resonance can result in catastrophic failure of the object at resonance. The classic example of this is breaking a wine glass with sound at the precise resonant frequency of the glass, although this is difficult in practice.^{[13]}
Electrical resonance
Main article: Electrical resonanceElectrical resonance occurs in an electric circuit at a particular resonant frequency when the impedance of the circuit is at a minimum in a series circuit or at maximum in a parallel circuit (or when the transfer function is at a maximum).
Optical resonance
Main article: Optical cavityAn optical cavity or optical resonator is an arrangement of mirrors that forms a standing wave cavity resonator for light waves. Optical cavities are a major component of lasers, surrounding the gain medium and providing feedback of the laser light. They are also used in optical parametric oscillators and some interferometers. Light confined in the cavity reflects multiple times producing standing waves for certain resonant frequencies. The standing wave patterns produced are called modes. Longitudinal modes differ only in frequency while transverse modes differ for different frequencies and have different intensity patterns across the cross section of the beam. Ring resonators and whispering galleries are examples of optical resonators that do not form standing waves.
Different resonator types are distinguished by the focal lengths of the two mirrors and the distance between them. (Flat mirrors are not often used because of the difficulty of aligning them precisely.) The geometry (resonator type) must be chosen so the beam remains stable, i.e. the beam size does not continue to grow with each reflection. Resonator types are also designed to meet other criteria such as minimum beam waist or having no focal point (and therefore intense light at that point) inside the cavity.
Optical cavities are designed to have a very large Q factor;^{[14]} a beam will reflect a very large number of times with little attenuation. Therefore the frequency line width of the beam is very small compared to the frequency of the laser.
Additional optical resonances are guidedmode resonances and surface plasmon resonance, which result in anomalus reflection and high evanescent fields at resonance. In this case, the resonant modes are guided modes of a waveguide or surface plasmon modes of a dielectricmetallic interface. These modes are usually excited by a subwavelength grating.
Orbital resonance
Main article: Orbital resonanceIn celestial mechanics, an orbital resonance occurs when two orbiting bodies exert a regular, periodic gravitational influence on each other, usually due to their orbital periods being related by a ratio of two small integers. Orbital resonances greatly enhance the mutual gravitational influence of the bodies. In most cases, this results in an unstable interaction, in which the bodies exchange momentum and shift orbits until the resonance no longer exists. Under some circumstances, a resonant system can be stable and self correcting, so that the bodies remain in resonance. Examples are the 1:2:4 resonance of Jupiter's moons Ganymede, Europa, and Io, and the 2:3 resonance between Pluto and Neptune. Unstable resonances with Saturn's inner moons give rise to gaps in the rings of Saturn. The special case of 1:1 resonance (between bodies with similar orbital radii) causes large Solar System bodies to clear the neighborhood around their orbits by ejecting nearly everything else around them; this effect is used in the current definition of a planet.
Atomic, particle, and molecular resonance
Main articles: Nuclear magnetic resonance and Resonance (particle)Nuclear magnetic resonance (NMR) is the name given to a physical resonance phenomenon involving the observation of specific quantum mechanical magnetic properties of an atomic nucleus in the presence of an applied, external magnetic field. Many scientific techniques exploit NMR phenomena to study molecular physics, crystals and noncrystalline materials through NMR spectroscopy. NMR is also routinely used in advanced medical imaging techniques, such as in magnetic resonance imaging (MRI).
All nuclei containing odd numbers of nucleons have an intrinsic magnetic moment and angular momentum. A key feature of NMR is that the resonant frequency of a particular substance is directly proportional to the strength of the applied magnetic field. It is this feature that is exploited in imaging techniques; if a sample is placed in a nonuniform magnetic field then the resonant frequencies of the sample's nuclei depend on where in the field they are located. Therefore, the particle can be located quite precisely by its resonant frequency.
Electron paramagnetic resonance, otherwise known as Electron Spin Resonance (ESR) is a spectroscopic technique similar to NMR, but uses unpaired electrons instead. Materials for which this can be applied are much more limited since the material needs to both have an unpaired spin and be paramagnetic.
The Mössbauer effect is the resonant and recoilfree emission and absorption of gamma ray photons by atoms bound in a solid form.
Resonance (particle physics): In quantum mechanics and quantum field theory resonances may appear in similar circumstances to classical physics. However, they can also be thought of as unstable particles, with the formula above valid if the Γ is the decay rate and Ω replaced by the particle's mass M. In that case, the formula comes from the particle's propagator, with its mass replaced by the complex number M + iΓ. The formula is further related to the particle's decay rate by the optical theorem.
Failure of the original Tacoma Narrows Bridge
Main article: Tacoma Narrows Bridge (1940)The dramatically visible, rhythmic twisting that resulted in the 1940 collapse of "Galloping Gertie," the original Tacoma Narrows Bridge, has sometimes been characterized in physics textbooks as a classical example of resonance. However, this description is misleading. The catastrophic vibrations that destroyed the bridge were not due to simple mechanical resonance, but to a more complicated interaction between the bridge and the winds passing through it — a phenomenon known as aeroelastic flutter. Robert H. Scanlan, father of bridge aerodynamics, has written an article about this misunderstanding.^{[15]}
For more details on this topic, see Mechanical resonance.Resonance causing a vibration on the International Space Station
The rocket engines for the International Space Station are controlled by autopilot. Ordinarily the uploaded parameters for controlling the engine control system for the Zvezda module will cause the rocket engines to boost the International Space Station to a higher orbit. The rocket engines are hingemounted, and ordinarily the operation is not noticed by the crew. But on January 14, 2009, the uploaded parameters caused the autopilot to swing the rocket engines in larger and larger oscillations, at a frequency of 0.5 Hz. These oscillations were captured on video, and lasted for 142 seconds.^{[16]}
See also
 Acoustic resonance
 Center frequency
 Cymatics
 Damping
 Driven harmonic motion
 Earthquake engineering
 Electrical resonance
 Formant
 Harmonic oscillator
 Impedance
 Nonlinear resonance
 Q factor
 Resonance disaster
 Resonator
 Vibration
 Schumann resonance
 Simple harmonic motion
 Tuned circuit
 Sympathetic string
References
 ^ Katsuhiko Ogata (2005). System Dynamics (4th ed.). University of Minnesota. p. 617.
 ^ Ajoy Ghatak (2005). Optics, 3E (3rd ed.). Tata McGrawHill. p. 6.10. ISBN 9780070585836. http://books.google.com/books?id=jStDc2LmU5IC&pg=PT97&dq=dampingdecreases+resonance+amplitude#v=onepage&q=dampingdecreases%20resonance%20amplitude&f=false.
 ^ Andrea Frova and Mariapiera Marenzana (2006). Thus spoke Galileo: the great scientist's ideas and their relevance to the present day. Oxford University Press. pp. 133–137. ISBN 9780198566250. http://books.google.com/books?id=1P6fFbE4CAC&pg=PA133&dq=Galileo+pendulum+resonance#v=onepage&q=Galileo%20pendulum%20resonance&f=false.
 ^ Stillman Drake, Noel M. Swerdlow, and Trevor Harvey Levere (1999). Essays on Galileo and the history and philosophy of science. University of Toronto Press. pp. 41–42. ISBN 9780802075857. http://books.google.com/books?id=sp8_hrRI2MoC&pg=PA41&dq=galileo+1602+pendulum#v=onepage&q=galileo%201602%20pendulum&f=false.
 ^ A. E. Siegman (1986). Lasers. University Science Books. pp. 105–108. ISBN 9780935702118. http://books.google.com/books?id=1BZVwUZLTkAC&pg=PA107&dq=resonanceapproximation+amplitude+linewidth+frequency+Lorentzian+real#v=onepage&q=resonanceapproximation%20amplitude%20linewidth%20frequency%20Lorentzian%20real&f=false.
 ^ Frederick Emmons Terman (1932). Radio Engineering. McGrawHill Book Company. http://books.google.com/books?id=8rE8AAAAIAAJ&q=inauthor:terman+inauthor:frederick+universal&dq=inauthor:terman+inauthor:frederick+universal.
 ^ William McC. Siebert (1986). Circuits, signals, and systems. MIT Press. p. 113. ISBN 9780262192293. http://books.google.com/books?id=zBTUiIrb2WIC&pg=PA113&dq=siebert+universalresonancecurve#v=onepage&q=&f=false.
 ^ James H. Harlow (2004). Electric power transformer engineering. CRC Press. pp. 2–216. ISBN 9780849317040. http://books.google.com/books?id=DANXjaoaucYC&pg=PT241&dq=qfactor+damping#v=onepage&q=qfactor%20damping&f=false.
 ^ Michael H. Tooley (2006). Electronic circuits: fundamentals and applications. Newnes. pp. 77–78. ISBN 9780750669238. http://books.google.com/books?id=8fuppV9O7xwC&pg=PA77&dq=qfactor+bandwidth#v=onepage&q=qfactor%20bandwidth&f=false.
 ^ Encyclopedia of Laser Physics and Technology:Q factor
 ^ Time and Frequency from A to Z: Q to Ra
 ^ Olson, Harry F. Music, Physics and Engineering. Dover Publications, 1967, pp. 248–249. "Under very favorable conditions most individuals can obtain tonal characteristics as low as 12 Hz."
 ^ http://www.physics.ucla.edu/demoweb/demomanual/acoustics/effects_of_sound/breaking_glass_with_sound.html
 ^ http://www.rpphotonics.com/q_factor.html
 ^ K. Billah and R. Scanlan (1991). "Resonance, Tacoma Narrows Bridge Failure, and Undergraduate Physics Textbooks" (PDF). American Journal of Physics 59 (2): 118–124. Bibcode 1991AmJPh..59..118B. doi:10.1119/1.16590. http://www.ketchum.org/billah/BillahScanlan.pdf. Retrieved 20110529.
 ^ Continued Shaking on space station rattles NASA.
External links
 Definition of Resonance  "The increase in amplitude of oscillation of an electric or mechanical system exposed to a periodic force whose frequency is equal or very close to the natural undamped frequency of the system."
 Resonance  a chapter from an online textbook
 Greene, Brian, "Resonance in strings". The Elegant Universe, NOVA (PBS)
 Hyperphysics section on resonance concepts
 Resonance versus resonant (usage of terms)
 Wood and Air Resonance in a Harpsichord
 Java applet demonstrating resonances on a string when the frequency of the driving force is varied
 Java applet demonstrating the occurrence of resonance when the driving frequency matches with the natural frequency of an oscillator
 Breaking glass with sound, including highspeed footage of glass breaking
Categories: Antennas (radio)
 Control theory
 Electronics terms
 Scattering
 Waves
Wikimedia Foundation. 2010.