Arsine Identifiers CAS number ChemSpider EC number ChEBI Jmol-3D images Image 1 Properties Molecular formula AsH3 Molar mass 77.95 g/mol Appearance colourless gas Density 4.93 g/l, gas; 1.640 g/mL (−64 °C) Melting point
−117 °C (157 K)
−62.5 °C (210 K)
Solubility in water 0.07 g/100 ml (25 °C) Structure Molecular shape trigonal pyramidal Dipole moment 0.20 D Thermochemistry Std enthalpy of
o298 +66.4 kJ/mol Standard molar
o298 223 kJ.K−1.mol−1 Hazards MSDS External MSDS EU classification Very flammable (F+)
Highly toxic (T+)
Dangerous for the environment (N)
R-phrases , , , S-phrases , , , , , , , , NFPA 704 Flash point flammable gas Related compounds Related hydrides Ammonia; Phosphine; Stibine; Bismuthine Supplementary data page Structure and
n, εr, etc. Thermodynamic
Solid, liquid, gas
Spectral data UV, IR, NMR, MS (what is: /?)
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Arsine is the chemical compound with the formula AsH3. This flammable, pyrophoric, and highly toxic gas is one of the simplest compounds of arsenic. Despite its lethality, it finds applications in the semiconductor industry and for the synthesis of organoarsenic compounds.
- 1 General properties
- 2 Discovery and synthesis
- 3 Reactions
- 4 Applications
- 5 Forensic science and the Marsh test
- 6 Toxicology
- 7 See also
- 8 Bibliography
- 9 Further reading
- 10 References
- 11 External links
At its standard state, arsine is a colorless, denser-than-air gas that is slightly soluble in water (20% at 20 C) and in many organic solvents as well. Whereas arsine itself is odorless, owing to its oxidation by air it is possible to smell a slight garlic or fish-like scent when the compound is present at above about 0.5 ppm. This compound is generally regarded as stable, since at room temperature it decomposes only slowly. At temperatures of ca. 230 °C decomposition to arsenic and hydrogen is rapid. Several factors, such as humidity, presence of light and certain catalysts (namely aluminium) facilitate the rate of decomposition.
AsH3 is a pyramidal molecule with H–As–H angles of 91.8° and three equivalent As–H bonds, each of 1.519 Å length. The term arsine is commonly used to describe a class of organoarsenic compounds of the formula AsH3−xRx, where R = aryl or alkyl. For example, As(C6H5)3, called triphenylarsine, is referred to as "an arsine."
Discovery and synthesis
- 4 AsCl3 + 3 NaBH4 → 4 AsH3 + 3 NaCl + 3 BCl3
This type of reaction was employed in the discovery of arsine as reported in 1775 by Carl Scheele who reduced arsenic(III) oxide with zinc in the presence of acid. This reaction is a prelude to the Marsh test, described below.
Alternatively, sources of As3− react with protonic reagents to also produce this gas:
- Zn3As2 + 6 H+ → 2 AsH3 + 3 Zn2+
Typical for a heavy hydride (e.g., SbH3, H2Te, SnH4), AsH3 is unstable with respect to its elements. In other words, AsH3 is stable kinetically but not thermodynamically.
- 2 AsH3 → 3 H2 + 2 As
This decomposition reaction is the basis of the Marsh Test described below, which detects the metallic As.
Continuing the analogy to SbH3, AsH3 is readily oxidized by concentrated O2 or the dilute O2 concentration in air:
- 2 AsH3 + 3 O2 → As2O3 + 3 H2O
Precursor to metallic derivatives
AsH3 is used as a precursor to metal complexes of "naked" (or "nearly naked") As. Illustrative is the dimanganese species [(C5H5)Mn(CO)2]2AsH, wherein the Mn2AsH core is planar.
A characteristic test for arsenic involves the reaction of AsH3 with Ag+, called the Gutzeit test for arsenic. Although this test has become obsolete in analytical chemistry, the underlying reactions further illustrate the affinity of AsH3 for "soft" metal cations. In the Gutzeit test, AsH3 is generated by reduction of aqueous arsenic compounds, typically arsenites, with Zn in the presence of H2SO4. The evolved gaseous AsH3 is then exposed to AgNO3 either as powder or as a solution. With solid AgNO3, AsH3 reacts to produce yellow Ag4AsNO3, whereas AsH3 reacts with a solution of AgNO3 to give black Ag3As.
The acidic properties of the As–H bond are often exploited. Thus, AsH3 can be deprotonated:
- AsH3 + NaNH2 → NaAsH2 + NH3
Upon reaction with the aluminium trialkyls, AsH3 gives the trimeric [R2AlAsH2]3, where R = (CH3)3C. This reaction is relevant to the mechanism by which GaAs forms from AsH3 (see below).
Reaction with halogen compounds
In contrast to the behavior of PH3, AsH3 does not form stable chains, although H2As–AsH2 and even H2As–As(H)–AsH2 have been detected. The diarsine is unstable above −100 °C.
AsH3 is used in the synthesis of semiconducting materials related to microelectronics and solid-state lasers. Related to P, Arsenic is an n-dopant for silicon and germanium. More importantly, AsH3 is used to make the semiconductor GaAs by chemical vapor deposition (CVD) at 700–900 °C:
- Ga(CH3)3 + AsH3 → GaAs + 3 CH4
For microelectronic applications, arsine can be provided via a sub-atmospheric gas source. In this type of gas package, the arsine is adsorbed on a solid microporous adsorbent inside a gas cylinder. This method allows the gas to be stored without pressure which significantly reduces the risk of an arsine gas leak from the cylinder. With this apparatus, arsine is obtained by applying vacuum to the gas cylinder valve outlet. For semiconductor manufacturing, this method is practical as these processes usually operate under high vacuum.
Since before WWII AsH3 was proposed as a possible chemical warfare weapon. The gas is colorless, almost odorless, and 2.5 times denser than air, as required for a blanketing effect sought in chemical warfare. It is also lethal in concentrations far lower than those required to smell its garlic-like scent. In spite of these characteristics, arsine was never officially used as a weapon, because of its high flammability and its lower efficacy when compared to the non-flammable alternative phosgene. On the other hand, several organic compounds based on arsine, such as lewisite (β-chlorovinyldichloroarsine), adamsite (diphenylaminechloroarsine), Clark I (diphenylchloroarsine) and Clark II (diphenylcyanoarsine) have been effectively developed for use in chemical warfare.
Forensic science and the Marsh test
AsH3 is also well known in forensic science because it is a chemical intermediate in the detection of arsenic poisoning. The old (but extremely sensitive) Marsh test generates AsH3 in the presence of arsenic. This procedure, developed around 1836 by James Marsh, is based upon treating an As-containing sample of a victim's body (typically the stomach) with As-free zinc and dilute sulfuric acid: if the sample contains arsenic, gaseous arsine will form. The gas is swept into a glass tube and decomposed by means of heating around 250–300 °C. The presence of As is indicated by formation of a deposit in the heated part of the equipment. On the other hand, the appearance of a black mirror deposit in the cool part of the equipment indicates the presence of antimony (the highly unstable SbH3 decomposes even at low temperatures).
The Marsh test was widely used by the end of the 19th century and the start of the 20th; nowadays more sophisticated techniques such as atomic spectroscopy, inductively coupled plasma and x-ray fluorescence analysis are employed in the forensic field. Though neutron activation analysis was used to detect trace levels of arsenic in the mid 20th century it has fallen out of use in modern forensics.
For the toxicology of other arsenic compounds, see Arsenic, Arsenic trioxide, and Arsenicosis. The toxicity of arsine is distinct from that of other arsenic compounds. The main route of exposure is by inhalation, although poisoning after skin contact has also been described. Arsine attacks haemoglobin in the red blood cells, causing them to be destroyed by the body.
The first signs of exposure, which can take several hours to become apparent, are headaches, vertigo and nausea, followed by the symptoms of haemolytic anaemia (high levels of unconjugated bilirubin), haemoglobinuria and nephropathy. In severe cases, the damage to the kidneys can be long-lasting.
Exposure to arsine concentrations of 250 ppm is rapidly fatal: concentrations of 25–30 ppm are fatal for 30 min exposure, and concentrations of 10 ppm can be fatal at longer exposure times. Symptoms of poisoning appear after exposure to concentrations of 0.5 ppm. There is little information on the chronic toxicity of arsine, although it is reasonable to assume that, in common with other arsenic compounds, a long-term exposure could lead to arsenicosis.
- Cacodylic acid
- Cacodyl oxide
- Devarda's alloy, also used to produce arsine in the lab
- List of highly toxic gases
- Marsh test first used to analyse AsH3
- James Marsh invented in 1836 the test bearing now his name
- ^ a b c d e Institut National de Recherche et de Sécurité (2000) (PDF). Fiche toxicologique nº 53: Trihydrure d'arsenic. http://www.inrs.fr/inrs-pub/inrs01.nsf/IntranetObject-accesParReference/FT%2053/$File/ft53.pdf. Retrieved 2006-09-06.
- ^ Medical Management Guidelines for Arsine www.atsdr.cdc.gov
- ^ Bellama, J. M.; MacDiarmid, A. G. "Synthesis of the Hydrides of Germanium, Phosphorus, Arsenic, and Antimony by the Solid-Phase Reaction of the Corresponding Oxide with Lithium Aluminum Hydride" Inorganic Chemistry, 1968, vol. 7, page 2070–2
- ^ a b Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001
- ^ Herrmann, W. A.; Koumbouris, B.; Schaefer, A.; Zahn, T.; Ziegler, M. L. "Generation and Complex Stabilization of Arsinidene and Diarsine Fragments by Metal-Induced Degradation of Monoarsine" Chemische Berichte (1985), vol. 118, pages 2472–88
- ^ King, E. J. "Qualitative Analysis and Electrolytic Solutions" Harcourt, Brace, and World; New York (1959)
- ^ Atwood, D. A.; Cowley, A. H.; Harris, P. R.; Jones, R. A.; Koschmieder, S. U.; Nunn, C. M.; Atwood, J. L.; Bott, S. G. "Cyclic Trimeric Hydroxy, Amido, Phosphido, and Arsenido Derivatives of aluminum and gallium. X-ray Structures of [tert-Bu2Ga(m-OH)]3 and [tert-Bu2Ga(m-NH2)]3" Organometallics (1993), vol. 12, pages 24–29
- ^ a b R. Minkwitz, R.; Kornath, A.; Sawodny, W.; Härtner, H. "Über die Darstellung der Pnikogenoniumsalze AsH4+SbF6−, AsH4+AsF6−, SbH4+SbF6−" Zeitschrift für anorganische und allgemeine Chemie Vol. 620, pages 753–756.
- ^ Suchard, Jeffrey R. (March 2006). "CBRNE — Arsenicals, Arsine". eMedicine. http://www.emedicine.com/EMERG/topic920.htm. Retrieved 2006-09-05.
- Hatlelid K. M. (1996). "Reactions of Arsine with Hemoglobine". Journal of Toxicology and Environmental Health Part A 47 (2): 145–157. doi:10.1080/009841096161852.
- Nielsen H. H. (1952). "The Molecular Structure of Arsine". The Journal of Chemical Physics 20 (12): 1955–1956. doi:10.1063/1.1700347.
- Fowler B. A., Weissberg J. B. (1974). "Arsine poisoning". New England Journal of Medicine 300: 1171–1174.
- International Chemical Safety Card 0222
- IARC Monograph "Arsenic and Arsenic Compounds"
- NIOSH Pocket Guide to Chemical Hazards
- Institut national de recherche et de sécurité (2000). "Trihydrure d'arsenic." Fiche toxicologique n° 53. Paris:INRS. (French)
- Data on arsine from Air Liquide[dead link]
Wikimedia Foundation. 2010.