Diamond turning

Diamond turning
Diamond flycutting

Diamond turning is a process of mechanical machining of precision elements using lathes or derivative machine tools (e.g., turn-mills, rotary transfers) equipped with natural or synthetic diamond-tipped tool bits. The term single-point diamond turning (SPDT) is sometimes applied, although as with other lathe work, the "single-point" label is sometimes only nominal (radiused tool noses and contoured form tools being options). The process of diamond turning is widely used to manufacture high-quality aspheric optical elements from crystals, metals, acrylic, and other materials. Optical elements produced by the means of diamond turning are used in optical assemblies in telescopes, video projectors, missile guidance systems, lasers, scientific research instruments, and numerous other systems and devices. Most SPDT today is done with computer numerical control (CNC) machine tools. Diamonds also serve in other machining processes, such as milling, grinding, and honing.

Contents

Process

Diamond turning is a multi-stage process. Initial stages of machining are carried out using a series of CNC lathes of increasing accuracy. A diamond-tipped lathe tool is used in the final stages of the manufacturing process to achieve sub-nanometer level surface finishes and sub-micrometer form accuracies. The surface finish quality is measured as the peak-to-valley distance of the grooves left by the lathe. The form accuracy is measured as a mean deviation from the ideal target form. Quality of surface finish and form accuracy is monitored throughout the manufacturing process using such equipment as contact and laser profilometers, laser interferometers, optical and electron microscopes.

The machine tool

For best possible quality natural diamonds are used as single-point cutting elements during the final stages of the machining process. A CNC SPDT lathe rests atop a high-quality granite base with micrometer surface finish quality. The granite base is placed on air suspension on a solid foundation, keeping its working surface strictly horizontal. The machine tool components are placed on top of the granite base and can be moved with high degree of accuracy using a high-pressure air cushion or hydraulic suspension. The machined element is attached to an air chuck using negative air pressure and is usually centered manually using a micrometer. The chuck itself is separated from the electric motor that spins it by another air suspension.

The cutting tool is moved with nanometer precision by a combination of electric motors and piezoelectric actuators. The motion of the tool is controlled by a list of coordinates generated by a computer directly from a CAD model in newer machines or by manually-generated machining code (usually G-Code or a derivative) on older machines . The final surface is achieved with a series of cutting passes of decreasing depth.

Alternative methods of diamond machining in practice also include diamond fly cutting and diamond milling. Diamond fly cutting can be used to generate diffraction gratings and other linear patterns with appropriately contoured diamond shapes. Diamond milling can be used to generate aspheric lens arrays by annulus cutting methods with a spherical diamond tool.

Materials

Diamond turning is specifically useful when cutting materials that are viable as infrared optical components and certain non-linear optical components such as KDP. KDP is a perfect material in application for diamond turning, because the material is very desirable for its optical modulating properties, yet it is impossible to make optics from this material using conventional methods. KDP is water soluble, so conventional grinding and polishing techniques are not effective in producing optics. Diamond turning works well to produce optics from KDP.

Generally, diamond turning is restricted to certain materials. Materials that are readily machinable include:[1]

The most often requested materials that are not readily machinable are:

Ferrous materials are not readily machinable because the carbon in the diamond tool chemically reacts with the substrate, leading to tool damage and dulling after short cut lengths. Several techniques have been investigated to prevent this reaction, but few have been successful for long diamond machining processes at mass production scales. Diamond turning is most often used in infrared wavelengths because of the materials, surface roughness, and pick distance for the tooling.

Quality control

Despite all the automation involved in the diamond turning process, the human operator still plays the main role in achieving the final result. Quality control is a major part of the diamond turning process and is required after each stage of machining, sometimes after each pass of the cutting tool. If it is not detected immediately, even a minute error during any of the cutting stages results in a defective part. The extremely high requirements for quality of diamond-turned optics leave virtually no room for error.

The SPDT manufacturing process produces a relatively high percentage of defective parts, which must be discarded. As a result, the manufacturing costs are high compared to conventional polishing methods. Even with the relatively high volume of optical components manufactured using the SPDT process, this process cannot be classified as mass production, especially when compared with production of polished optics. Each diamond-turned optical element is manufactured on an individual basis with extensive manual labor.

See also

  • Fabrication and testing (optical components)

References

  1. ^ Mark Craig Gerchman (1986). "Specifications and manufacturing considerations of diamond-machined optical components.". Optical Components Specifications for Laser-based Systems and other Modern Optical Systems 607: 36–45. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Diamond enhancement — Diamond enhancements are specific treatments, performed on natural diamonds (usually those already cut and polished into gems), which are designed to improve the gemological characteristics and therefore the value of the stone in one or more ways …   Wikipedia

  • Diamond tool — A close up of the segment of a diamond saw blade A diamond tool is a cutting tool with diamond grains fixed on the functional parts of the tool via a bonding material or another method.[1] As diamond is a superhard material, diamond tools have… …   Wikipedia

  • Diamond Sun — Studio album by Glass Tiger Released April 13, 1988 ( …   Wikipedia

  • Turning Point (2004) — Infobox Wrestling event name=Turning Point 2004 promotion=Total Nonstop Action Wrestling date=December 5, 2004 venue=Universal Orlando Resortcite web|url= http://www.wwfchamps.com/ppv.php?ppv=384|title=Turning Point 2004 venue and… …   Wikipedia

  • Diamond interchange — A typical diamond interchange A diamond interchange is a common type of road junction, used where a freeway crosses a minor road. The freeway itself is grade separated from the minor road, one crossing the other over a bridge. Approaching the… …   Wikipedia

  • Diamond — This article is about the mineral. For the gemstone, see Diamond (gemstone). For other uses, including the shape ◊, see Diamond (disambiguation) …   Wikipedia

  • Diamond cutting — Part of a series on Diamonds Material Material properties Crystallographic defects Formatio …   Wikipedia

  • Diamond Dallas Page — For the 1930s cricketer, see Dallas Page (cricketer) Diamond Dallas Page Page in June 2011 Ring name(s) Dallas Page Diamond Dallas Page[ …   Wikipedia

  • Diamond Aircraft Industries — HOAC redirects here. HOAC may also refer to Historians of American Communism. Diamond Aircraft Industries Industry Aerospace Predecessor HOAC Founded 1981 Headquarters …   Wikipedia

  • Diamond Hill — For other uses, see Diamond Hill (disambiguation). Nan Lian Garden in Diamond Hill Diamond Hill (Chinese: 鑽石山; pinyin: Zuànshí shān; Cantonese Yale: Jyunsehk Sāan) is a hill in Kowloon, Hong Kong. The name also refers to the …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”