ICE TD

ICE TD
DBAG Class 605

An ICE-TD approaches Berlin Ostbahnhof
In service 2001 — today
Manufacturer Bombardier/Siemens
Family name Venturio
Number built 20 trainsets
Number in service 19 trainsets
Formation 4 cars per trainset
Capacity 154 standard class, 41 first class
Operator DB Fernverkehr
Specifications
Car body construction Steel
Articulated sections Flexible diaphragm (within unit only)
Maximum speed 125 mph (200 km/h)
Weight 232 tonnes
Traction system DEMU
Engine(s) Cummins QSK19 of 560 kW (750 hp) at 1800rpm
Power output 3,000 hp (2,200 kW)
UIC classification 2'Bo'+Bo'2'+2'Bo'+Bo'2'
Braking system(s) Rheostatic
Safety system(s) Sifa, PZB90, LZB, Eurobalise
Coupling system Dellner
Gauge 1,435 mm (4 ft 8 12 in) Standard gauge

The DBAG Class 605 is a high-speed diesel multiple unit (DMU) train, in service with Deutsche Bahn and DSB, commonly known as the ICE TD.

Contents

Development

Following the successful inauguration of the Intercity-Express system in 1991 and the order to develop the ICE 2, in 1994 DB started plans to upgrade long-distance services using conventional lines, with comfort level raised near the ICE standard and higher speeds, with tilting electric multiple units to replace locomotive-pulled InterCity (IC) and InterRegio (IR) trains. DB assigned the name IC T to the project, with "T" standing for Triebzug (multiple unit). This development resulted in the ICE T.

Later, Deutsche Bahn also saw the need for a similar new train on its non-electrified routes, and started the ICT-VT project, with "VT" standing for Verbrennungstriebwagen (internal combustion motor car).

Deutsche Bahn pursued the development of the ICE 3, IC T and ICT-VT projects in parallel. The trains share a general styling concept, most prominently a lounge section in the front cars with a view forward at the tracks, being separated only by a glass wall from the driver's compartment. Technically, the trains share a lot of components and technical layout, as well as the concept of distributed traction: in contrast to the ICE 1 and ICE 2 designs, the new units were planned not with powerheads, but with peripheral underfloor motors, in order to reduce axle load (quite important for tilting trains) and increase tractive effort.

For the ICT-VT, a four-car configuration was chosen, without a restaurant car, otherwise, Deutsche Bahn aimed for a common appearance and the greatest possible technical commonality with the IC T. Even the possibility of coupling together an electric and diesel train and operate them jointly was to be provided.

Production

In 1996, Deutsche Bahn placed an order for 20 diesel multiple units with a consortium led by Siemens.

As for the ICE T, DWA (Bombardier) produced the end cars and Siemens produced the middle cars. The ICE TD was fitted with an electro-mechanic tilting actuator system developed by Siemens, rather than the Fiat (Alstom) Pendolino hydraulic system used in the ICE T. Also, the secondary suspension between bogie and carbody is air springs rather than metal coils for higher ride comfort.[1] A characteristic element of the Siemens system visible on the outside is the crescent-shaped top of the outer carbody supports (above the bogie center).

The tilting system also left room for electric motors on both axes in a bogie, thus every car of the Diesel-electric train has an unpowered bogie and a powered bogie (2'Bo' configuration).[1] The power for the electric motors of the class 605 is generated by four diesel engines, one on each car, with 560 kW power each. These engines are based on engines for trucks. Electrically, the two halves of the train form two independent power units of two cars each, with the theoretical possibility of the addition of a fifth car as middle trailer.

The first train was assembled in 1998, trials on track started in April 1999. During a test run on 13 January 2000, 222 km/h was achieved.[1]

Shortly before the first IC T entered service in 1999, the names of the electric and diesel trains were changed to ICE T and ICE TD respectively, with "T" now standing for the English word tilt(ing), and "TD" for tilt(ing)-diesel.

Service history

In 2001, all 20 units were commissioned for Deutsche Bahn, who took them as class 605. After pilot runs, the trains entered regular service on ICE line 17 between Dresden and Munich on 10 June 2001. Later, the trains were also used between Munich and Zurich.

The service life of the class 605 was rather ill-fated. The ICE TD units were plagued by technical problems from the start.

After the breaking of an axle on 2 December 2002, all remaining 19 units (one fell off a working platform) were grounded. Even though one year later the trains were admitted to service again, DB judged their operation to be overly expensive. DB must pay full diesel tax for the fuel.

The trains were re-activated in anticipation of extra traffic during the 2006 FIFA World Cup in Germany. From 2006, they were used for charter and relief trains.

Starting end of 2007, the class 605 is used in regular service on the Berlin-Hamburg-Copenhagen route, as a replacement for the Danish IC3 trains in Hamburg-Copenhagen service (these should long ago been replaced by the IC4 trains, but due to technical problems those have not been commissioned yet by DSB). The ten class 605 used in these services were equipped with the Danish ATC safety system. From 2008, the Denmark-compatible 605 are also used for Berlin-Hamburg-Aarhus services (previously, IC3 was used on the Flensburg-Aarhus route, and regional trains on the Hamburg-Flensburg relation). From mid-2009, three more ICE-TD units are to be used in Germany-Denmark service, allowing DSB to free up more IC3 trains for domestic service.[2]

See also

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • ICE — ICE …   Deutsch Wörterbuch

  • ICE-T — (Halbzug) Nummerierung: 411 001–032 (1. Bauserie), 051–078 (2. Bauserie)[1] 415 001–006, 080–084 Anzahl: BR 411: 60 BR 415: 11 Hersteller …   Deutsch Wikipedia

  • ICE-W — ICE 3 (Halbzug) Nummerierung: 403 x01–x37 (1. Bauserie), 403 x51–x63 (2. Bauserie), 406 x01–x13 (DB, mit Lücken); 406 x51–x54 (NS), 406 x80 x85 (DB, Umbau Frankreich Verkehr) Anzahl: ICE 3: 50 ICE 3 …   Deutsch Wikipedia

  • ICE 1 — Nummerierung: Tz 101–120, 152–190 Anzahl: 59 Garnituren (60 gebaut) Hersteller: AEG, ABB, Henschel …   Deutsch Wikipedia

  • ICE 2.2 — ICE 3 (Halbzug) Nummerierung: 403 x01–x37 (1. Bauserie), 403 x51–x63 (2. Bauserie), 406 x01–x13 (DB, mit Lücken); 406 x51–x54 (NS), 406 x80 x85 (DB, Umbau Frankreich Verkehr) Anzahl: ICE 3: 50 ICE 3 …   Deutsch Wikipedia

  • ICE 3 — ICE 3 Nummerierung: Baureihe 403, Baureihe 406 und Baureihe 407 Anzahl: BR 403: 50 ICE 3M: 11 ICE 3MF: 6 BR 407: 16 (im Bau) …   Deutsch Wikipedia

  • ICE 3M — ICE 3 (Halbzug) Nummerierung: 403 x01–x37 (1. Bauserie), 403 x51–x63 (2. Bauserie), 406 x01–x13 (DB, mit Lücken); 406 x51–x54 (NS), 406 x80 x85 (DB, Umbau Frankreich Verkehr) Anzahl: ICE 3: 50 ICE 3 …   Deutsch Wikipedia

  • ICE T — Nummerierung: 411 001–032 (1. Bauserie), 051–078 (2. Bauserie)[1], 080 084 (Mehrsystem Schweiz), 090 092 (ÖBB), 415 001–006, 020–024 Anzahl …   Deutsch Wikipedia

  • ICE T2 — ICE T (Halbzug) Nummerierung: 411 001–032 (1. Bauserie), 051–078 (2. Bauserie)[1] 415 001–006, 080–084 Anzahl: BR 411: 60 BR 415: 11 Hersteller …   Deutsch Wikipedia

  • ICE W — ICE 3 (Halbzug) Nummerierung: 403 x01–x37 (1. Bauserie), 403 x51–x63 (2. Bauserie), 406 x01–x13 (DB, mit Lücken); 406 x51–x54 (NS), 406 x80 x85 (DB, Umbau Frankreich Verkehr) Anzahl: ICE 3: 50 ICE 3 …   Deutsch Wikipedia

  • ICE 1 — ICE 1 Manufacturer various Constructed 1989 to 1993 Refurbishment 2005 to 2008 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”