LNER Gresley Classes A1 and A3

LNER Gresley Classes A1 and A3
Disambiguation: LNER Class A1, LNER Thompson Class A1/1, LNER Peppercorn Class A1
LNER Gresley Classes A1 and A3[1]
Number 2582 Sir Hugo. Popular book illustration of an A1 locomotive in its most iconic form, published around 1935.[2]
Power type Steam
Designer Nigel Gresley
Builder Doncaster Works (59)
North British Locomotive Co. (20)
Build date 1922–1935
Total produced A1: 52
A3: 51 rebuilt + 27 new
Configuration 4-6-2
UIC classification 2′C1 h3
Gauge 4 ft 8 12 in (1,435 mm)
Leading wheel
3 ft 2 in (0.965 m)
Driver diameter 6 ft 8 in (2.032 m)
Trailing wheel
3 ft 8 in (1.118 m)
Wheelbase 60 ft 10.6 in (18.56 m)
Length 70 ft 5 in (21.46 m)
Axle load A1: 20 long tons (20.3 t; 22.4 ST)
A3: 22.05 long tons (22.4 t; 24.7 ST)
Weight on drivers A1: 60 long tons (61.0 t; 67.2 ST)
Locomotive weight A1: 91.35 long tons (92.82 t; 102.31 ST)
Fuel type Coal
Fuel capacity 8 long tons (8.1 t; 9.0 ST)
Water capacity 5,000 imp gal (22,700 L; 6,000 US gal)
Boiler pressure A1: 180 psi (1.24 MPa)
A3: 220 psi (1.52 MPa)
Firegrate area 41.25 sq ft (3.832 m2)
Heating surface:
A1: 1,880 sq ft (175 m2)
A3: 504 sq ft (46.8 m2)
Heating surface:
A1: 835 sq ft (77.6 m2)
A3: 2,159 sq ft (200.6 m2)
Heating surface:
215 sq ft (20.0 m2)
Superheater area A1: 525 sq ft (48.8 m2)
A3: 1,104 sq ft (102.6 m2)
Cylinders Three
Cylinder size A1: 20 × 26 in (508 × 660 mm)
A3: 19 × 26 in (483 × 660 mm)
Valve gear Outside:Walschaerts
Inside: Gresley conjugated
Valve type Piston valves
Top speed 108 mph (174 km/h)
Tractive effort A1: 29,835 lbf (132.71 kN)
A3: 32,910 lbf (146.39 kN)
Career London and North Eastern Railway
British Railways
Power class BR: 7P6F
Axle load class Route Availability: 9
Withdrawn 1959–1966
Preserved One: 4472
Disposition One preserved, remainder scrapped

The London and North Eastern Railway LNER Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt to A3 specifications.

The names for the locomotives came from a variety of sources. The first, Great Northern, was named after its parent company. Others were given the names of high-ranking railway officials, but most were given the names of famous racehorses. One was named after the company's most famous long-distance passenger train, the Flying Scotsman (also the name of a racehorse). Flying Scotsman is the sole survivor of the class to be preserved. It is currently under mechanical overhaul at the National Railway Museum.


Class A1: Great Northern genesis

The new Pacific locomotives were built at the Doncaster "Plant" in 1922 to the design of Nigel Gresley, who had become Chief Mechanical Engineer of the GNR in 1911. The intention was to produce an engine able to handle, without assistance, mainline express services that were reaching the limits of the capacity of the Ivatt large-boilered Atlantics.

Gresley's initial Pacific project of 1915 was for an elongated version of the Ivatt Atlantic design with four cylinders.[3] Finally realising that he was in a design impasse, he took as a model the new American Pennsylvania Railroad class K4 Pacific of 1914. This in turn had been updated from a series of prototypes scientifically developed in 1910 under Francis J. Cole, Alco's Chief Consulting Engineer at Schenectady[4] and the Pennsylvania's K29 Alco prototype of 1911, also designed by Cole.[5] Descriptions of those locomotives appeared in the British technical press at the time and gave Gresley the elements necessary to design a thoroughly up-to-date locomotive.

Design features and construction history

The first two GNR Pacifics, 1470 Great Northern and 1471 Sir Frederick Banbury were introduced in 1922.[1] The Great Northern board ordered a further ten '1470-class' locomotives, which were under construction at Doncaster at the time of the formation of the LNER in 1923.[6][7]

In line with the philosophy behind Cole's Alco prototypes, the Gresley Pacifics were built to the maximum limits of the LNER loading gauge with a large boiler and wide firebox giving a large grate area. The firebox was set low and rested on the trailing carrying axle. However, unlike the Pennsylvania K4, the firebox was not of the flat-topped Belpaire variety, but a round-topped one that was in line with Great Northern tradition. Features in common with the American types were the downward profile towards the back of the firebox and the boiler tapering towards the front. Heat transfer and the flow of gases were helped by use of a combustion chamber extending forward from the firebox space into the boiler barrel, along with a boiler tube length limited to 19 feet (5.8 m), features inherited from the K4 type but not present on the earlier Cole Prototypes.[8] The boiler pressure was rated at 180 pounds per square inch (1.24 MPa).

The 1470-class Pacific was the third Great Northern locomotive type to incorporate Gresley’s universal 3-cylinder layout.[1][9] Drive from all three cylinders was concentrated on the middle coupled axle whilst the outside cranks were set at 120°, with the inside crank displaced by about 7 degrees to allow for the 1:8 inclination of the inside cylinder using Gresley conjugated valve gear to derive the motion of the inside valve spindle from the two outside valve spindles. This was to obviate the need for an inaccessible middle set of valve gear between the frames. A feature of the K4 that had soon been abandoned by the Pennsylvania Railroad was an unusual three-bar version of the Laird slide-bar.[10] However, Gresley adopted this type for all his locomotives and it was also taken up by Bulleid for his Pacifics and by Riddles for the British Railways standard designs.

LNER period

The Great Northern Railway was incorporated into the newly formed LNER as a result of the 1923 Grouping. Gresley was appointed Chief Mechanical Engineer of the new company, which was the second largest of the "Big Four" railway companies in Britain.[1] Realising the need for standardisation, Gresley adopted his GNR Pacific design as the standard express passenger locomotive for the LNER main line, designating it 'A1' within the LNER locomotive classification system. The choice was made after comparative trials with an equivalent North Eastern Railway Pacific, classified 'A2'. Between 1923 and 1925, 51 A1 locomotives were built; twenty by the North British Locomotive Company, and the remainder by Doncaster Works. However, Gresley's Pacifics had been designed to work within the bounds of the Great Northern Railway, meaning maximum distances of less than 200 miles (322 km).[1] After the grouping, the locomotives were required to have a far greater operating range.

Early improvements

In 1924, number 4472 Flying Scotsman, renumbered and named for the occasion, was displayed at the British Empire Exhibition at Wembley along with the first member of the Great Western Railway (GWR) Castle Class, number 4073 Caerphilly Castle.[11][12][13] The latter weighed 19.6 long tons (19.9 t; 22.0 ST) less than the Pacific, but was claimed to be the most powerful locomotive in Britain with a tractive effort rated at 31,825 lbf (141.56 kN).

In the following months, the two railway companies ran comparative exchange trials between the two types from which the Great Western emerged triumphant with 4079 Pendennis Castle.[1][14] The LNER learned valuable lessons from the trials which resulted in a series of modifications carried out from 1926 on number 4477 Gay Crusader. Changes to the valve gear included increased lap and longer travel, in accordance with Great Western practice; this allowed fuller exploitation of the expansive properties of steam whilst reducing back pressure from the exhaust, transforming performance and economy; the economies in coal and water consumption achieved were such that the 180 psi Pacifics could undertake long-distance non-stop runs that had previously been impossible. There followed a complete redesign of the valve gear, which was applied to 2555 Centenary in 1927, with the rest of the class being modified in due course.[15] Locomotives with modified valve gear had a slightly raised running plate over the cylinders in order to give room for the longer combination lever necessary for the longer valve travel. Another modification was made in 1927 when number 4430 Enterprise was fitted with a 220 psi (1.52 MPa) boiler. This was closely followed by two other locomotives which also incorporated variations in the cylinder diameter and superheater size for comparative purposes. This led Gresley to make a radical departure from Churchward practice by increasing the number of large tubes containing superheating elements, hence increasing the superheater surface area in contact with the hot gases, thus raising steam temperature. The presence of the larger superheater could be recognised from the square covers on either side of the smokebox, a feature that the locomotives retained throughout the rest of their existence.

At the 1925 British Empire Exhibition, Flying Scotsman was again exhibited; but this time, the GWR sent Pendennis Castle.[13][16]

Class A3

.75 inch to the foot scale live steam model of the first A3, number 2743 Felstead. The model had 3 cylinders and Gresley derived motion giving the characteristic syncopated beat. It belonged to Allan Allsop, then secretary of the Leicester Model Engineers and is depicted on the steaming bay of the Abbey Park track in August 1962

The outcome of the various experiments and modifications made to the A1s in the late 1920s was a new Class A3 “Super Pacific”, the first example of which was number 2743 Felstead.[1] This locomotive appeared in August 1928 with 220 psi (1.52 MPa) boiler, 19-inch (483 mm) cylinders, increased superheat, long-travel valves, improved lubrication and modified weight distribution.[17] Another new development was the changeover from right- to left-hand drive, less convenient for a right-handed fireman, but more so for sighting signals, resulting in the modification of all earlier locomotives.

Twenty-seven A3s were built from new, until 1935, with little variation except for a new type of boiler with a "banjo dome",[18] an oval steam collector that was placed on top of the rear boiler ring.[19] The first banjo dome was hidden beneath the casing of Cock o’ the North of 1934;[20] it was subsequently used in the A4 streamliners. The last nine A3 Pacifics were constructed with the device in 1935, and it became a standard fitting on all LNER large, wide-firebox boilers that were applied to new locomotives until 1949.[1] It was also applied to replacement boilers on the A3s.

Although all of the original Class A1 locomotives were eventually rebuilt to Class A3 specifications, it was a drawn-out process that lasted until 1949; 60068 Sir Visto was the last locomotive to be converted.[21] The changeover to left-hand drive took longer, and continued into the Fifties.

Further experiments

Despite having settled on a new standard type, Gresley continued to experiment on individual locomotives, in one of which experiments ACFI feedwater heaters were installed in A1 2576 The White Knight and A3 2580 Shotover. However, on the Pacifics the increase in efficiency was deemed insufficient and the apparatus was eventually removed.[22] In 1935, number 2544 Lemberg received Trofimoff piston valves of an ingenious design with automatically varying steam passages.[23]

A3s 2747 Coronach and 2571 Humorist were subjected to smoke deflection trials following an accident on the London, Midland and Scottish Railway (LMS) due to poor visibility; this included the modification of the upper smokebox area surrounding the chimney. Originally the whole smokebox wrapper was retained in order to form an air duct, with the exit behind the chimney, but this was found ineffective. The next stage, at least with 2571, was to cut off the top part of the wrapper, but retaining the sloping plate that directed air flow upwards, and therefore lifting the smoke above the locomotive. The original chimney was replaced by a double stove-pipe variety, and miniature deflector plates were added on either side, angled to concentrate the air flow when the locomotive was on the move.[24][25]

Smoke-lifting devices were not a priority with the normal single-chimney Pacifics. However, with its double chimney and subsequent fitting of a double Kylchap exhaust in 1937, Humorist continued to pose a problem in this regard and always had small wings on either side of the chimney. Finally, in the 1950s, it acquired the Peppercorn-type of deflector plates.


Corridor tender connection and porthole window to internal corridor

The original A1s were coupled to a traditional Great Northern type of tender with coal rails of a design that can be traced back to Stirling days. The A1-variant was a much-enlarged eight-wheel version carrying 8 long tons (8.13 t; 8.96 ST) of coal and 5,000 imperial gallons (23,000 l; 6,000 US gal) of water. In 1928, a new special type of tender body was built for the new non-stop Flying Scotsman train. This tender had a corridor connection and an access tunnel through the water tank.[26] It was of a more modern design with high side sheets curved in at the top and had a coal capacity of 9 long tons (9.14 t; 10.08 ST). In order to be able to pack an extra ton of coal, a single coal rail was provided on this particular series, but was later deemed unnecessary. Ten of these corridor tenders were built, and a non-corridor version of similar design followed with 8-ton coal capacity and no coal rail.[27] Further series of both types had disk wheels instead of the previous spoked variety.[28]

Operational details

Pre-war performance

The early A1 Pacifics were a match for the performances demanded of them in the early 1920s. They were certainly able to take loads single-handed that were beyond the capacity of their Atlantic predecessors as was shown in a test run made by 1471 when it took a 20-coach train weighing 600 long tons (610 t; 670 ST) over the 105 miles (169 km) from London to Grantham at an average speed of 51.8 miles per hour (83.4 km/h). However this was at the cost of heavy coal consumption, and general performance was well below the ultimate potential of the design.[29] This was largely due to a regression from the earlier 3-cylinder 2-6-0 design, which was the first to have the standard Gresley conjugated motion combined with long valve travel.[30] However, practical problems were experienced with components quickly suffering from premature wear, especially in the main bearing of the large 2:1 lever which had not yet been fitted with the very necessary ball race; excessive 'play' led to so much over-travel of the middle valve, that it began to hit the end-covers. In order to prevent this, when applying the gear to the Pacifics, Gresley fell back on the expedient of shortening valve travel even though that choked the exhaust at speed, was responsible for the heavy coal consumption, and negated most of the advantages gained by the locomotive's revolutionary design.[31] However, by incorporating the Great Western-inspired valve modifications, the economies in coal and water consumption achieved were such that the 180 psi Pacifics could undertake long-distance non-stop runs that were previously impossible.

The first and most spectacular outcome occurred in 1928, when the Pacifics were called upon daily to work the Flying Scotsman train non-stop over the 392 miles (631 km) between London and Edinburgh. Initially three A1s and two A3s took turns on this service. The modifications also gave the A1 locomotives greater speed potential, and the proof of this came in 1933 when a high-speed 3-car diesel railcar service had been mooted. As this would have provided limited accommodation for passengers, it was proposed to use steam traction at similar service speeds with six carriages. A trial return run between London and Leeds was made with modified A1 locomotive number 4472, Flying Scotsman; on the return trip with 6 coaches weighing 208 long tons (211.3 t; 233.0 ST) it attained 100 mph (160 km/h) (160 km/h) just outside Little Bytham in Lincolnshire for just over 600 yards (549 m).[28] There were earlier claims to this speed, notably by the Great Western locomotive 3440 City of Truro, but this 1933 run is generally considered to be the first reliably recorded instance. On a later trial run to Newcastle-upon-Tyne and back in 1935, A3 number 2750 Papyrus reached 108 miles per hour (174 km/h) hauling 217 long tons (220 t; 243 ST) at the same spot, maintaining a speed above 100 mph (161 km/h) for 12.5 consecutive miles (20.1 km), the world record for a non-streamlined locomotive, shared with a French Chapelon Pacific.[32]

Wartime service

Along with all the Gresley 3-cylinder types, the Pacifics suffered from low wartime maintenance standards, conditions for which they had not been designed. Gresley’s sudden death in 1941 and an unsympathetic successor, Edward Thompson, did not help matters in this respect. In 1945 Thompson took the opportunity to rebuild the first of Gresley's A1 Pacifics, Great Northern, to the LNER Class A1/1 specification with divided drive and separate valve gear to the inside cylinder. The A1/1 was classified in this manner after Arthur Peppercorn had designed and constructed his own Class A1s in 1947. Thompson intended to rebuild to this configuration all the Gresley A1s that had not been converted to A3 standard, but this never happened.

Post-war recovery and nationalisation

Thompson's successor, Peppercorn, reverted to Gresley's design principles. However as far as the Pacifics were concerned, one Thompson feature that Peppercorn did retain was the divided drive, where the inside cylinder was set well forward driving the front axle, whilst the two outside cylinders reverted to the A1 and A3 location driving the middle one.[33] Gresley had always strongly opposed divided drive; moreover his Pacifics had always been appreciated for their easy riding, a reputation not shared by those of his successors and a possible contributing factor towards the continued strong presence of Gresley Pacifics on the East Coast Main Line right down to the end of steam traction in the early 1960s.

60059 Tracery near Huntingdon in 1962, the last year of steam operation on the East Coast Main Line. GNR-type tender, double Kylchap exhaust and German-style smoke deflectors.

The Gresley 3-cylinder drive arrangement continued to bring a number of practical problems, the root of which was probably the need for the inside cylinder to be steeply inclined in order to give space for the inside connecting rod to clear the leading coupled axle; at the same time, the inside valve spindle had to be parallel with the outside ones from which it derived its motion. This problem had been overcome by what Holcroft called a "twist in the ports" (the passages that carried steam in and out of the cylinders). It also meant that the length of these passages was greater than that generally recommended, increasing "dead space", and this was combined with a shorter exhaust passage. The net result would be rather different working conditions in the middle cylinder from those on the outside. A contributing problem was also that any elongation of the outside valve spindles was multiplied by the conjugated valve gear.[33] Although this had been anticipated at the design stage, the overall consequence was that the inside cylinder had a tendency to give more power than the other two as speed increased leading to the overloading of the inside connecting rod bearings, especially the big-end which was liable to overheat and fail. Various experiments were tried over the years to cure this chronic ailment, and it was only towards the end of the steam era that a real solution was found in the Great Western type of big-end bearing. Other problems persisted, such as a stiff, insensitive regulator and overall design flaws that hampered maintenance.[33]

In spite of all this and the introduction of more recent Pacifics, by the middle of the 1950s Gresley types were continuing to have the quasi-monopoly of East Coast Main Line express passenger services, and as the Sixties approached they went through yet another series of improvements comparable to those of the 1920s. The most significant of these was the fitting of the French double Kylchap exhaust system, which was entirely due to the persistence from 1956 of P. N. Townend, Assistant District Motive Power Superintendent at King's Cross locomotive shed.[34] These modifications not only drastically reduced exhaust back pressure, making the locomotives far more economical and free-running, but kept the firetubes clean, greatly reducing turn-around time, so much so that they were able to fit into the more intensive diesel locomotive workings.[35] The Kylchap arrangement was already being universally applied to the A4 streamlined Pacifics, though with the non-streamlined A3 locomotives, the soft exhaust gave rise to smoke drift obscuring the driver’s forward vision. The solution came in the form of narrow German-style smoke deflectors, which somewhat changed the appearance of the A3 locomotives in their latter days.

The prototype locomotive, number 60113 Great Northern, had been rebuilt by Edward Thompson into a virtually new design. The first to be withdrawn was 60104 Solario in 1959, followed by 60095 Flamingo and 60055 Woolwinder in 1961. Otherwise, the class remained intact until 1962, and was still operating on express passenger work. The last class member to be withdrawn by British Railways was number 60052, Prince Palatine in January 1966.[36]


"Flying Scotsman" on the Llangollen Railway in 1994

The sole surviving member of the A3s and A1s is 4472 (60103) Flying Scotsman. The locomotive was withdrawn from service with British Railways in 1963 and was sold for preservation to Alan Pegler. After overhaul, Scotsman worked a number of railtours, including a non-stop London–Edinburgh run in 1968, the final year of steam traction on British Railways. After a much-publicised appeal in 2004, Scotsman was purchased by the National Railway Museum in York and is now part of the National Collection. As of 17 September 2010 (2010 -09-17), the locomotive is undergoing a major rebuild at the museum and is due to resume running in September 2011.[37]

In fiction

In The Railway Series children's books by the Rev. W. Awdry, the character Gordon the Big Engine is loosely based on an A1. According to the Rev. Awdry, in The Island of Sodor: Its People, History and Railways, Gordon was a "hush-hush" experimental prototype for Gresley's Pacific locomotives for the GNR. Built in 1922, Gordon was sold to the Fat Controller in 1923, once testing was complete. Following problems with the conjugated valve gear, Gordon was substantially rebuilt in 1939 on a two-cylinder chassis designed by the Fat Controller (which explains why Gordon did not look exactly like an A1 in the books).[38] Flying Scotsman also appears in The Railway Series in the book, Enterprising Engines.


Tri-ang, and later Hornby, have produced 'OO'-scale models of Flying Scotsman almost continuously since the 1960s. In the 2000s, Hornby also produced live steam examples, re-using the chassis from the initial LNER Class A4 models. Other manufacturers have produced models in other scales, such as Minitrix (N-gauge) and Bassett-Lowke (O-gauge).[39]

See also

P train.svg Trains portal


  1. ^ a b c d e f g h Herring: Classic British Steam Locomotives pp. 106–107
  2. ^ Frontispiece with initial "B.R." credit; caption (incorrect): 'The famous L.N.E.R Pacific class locomotive 'The Flying Scotsman' in Hind J.R.: The Book of the Railway
  3. ^ Brown, F.A.S: Nigel Gresley Locomotive Engineer, pp. 40–42
  4. ^ Westing, F. & Stauffer, A. : Erie Power", pp. 272, 274–5
  5. ^ Stauffer, Alvin F. : Pennsy Power, p.146
  6. ^ Weight, R.A.H.: Great Northern Locomotives 1847–1947
  7. ^ Brown: Nigel Gresley p. 62
  8. ^ Brown: Nigel Gresley p. 66
  9. ^ Nock, O.S.: The Locomotives of Sir Nigel Gresley pp. 24–26
  10. ^ Stauffer: Pennsy Power p. 162
  11. ^ Brown: Nigel Gresley p. 82
  12. ^ Boddy, Neve & Yeadon 1973, p. 13
  13. ^ a b le Fleming 1960, p. H16
  14. ^ Nock, O.S.: The Locomotives of Sir Nigel Gresley pp.41–43
  15. ^ Nock, O.S.: The Locomotives of Sir Nigel Gresley pp. 44–50
  16. ^ Boddy, Neve & Yeadon 1973, p. 14
  17. ^ 'Higher steam pressure on the L. & N.E. Railway' (Locomotive, Railway Carriage and Wagon Review), p. 343
  18. ^ 'New Pacific type locomotives, L. & N.E. Railway' (Locomotive, Railway Carriage and Wagon Review), pp. 345–346
  19. ^ Reed, Brian: LNER non-streamlined Pacifics
  20. ^ see fold-out drawing in Brown: Nigel Gresley
  21. ^ Reed: LNER Non-streamlined Pacifics, p. 23
  22. ^ Brown: Nigel Gresley, p. 18
  23. ^ Reed: LNER Non-streamlined Pacifics, p. 15
  24. ^ [Smoke Deflection Experiments on] 'No.2751' (Railway Magazine), p. 466
  25. ^ Brown: Nigel Gresley, p. 119
  26. ^ 'London to Edinburgh non-stop new LNER train services and the first corridor tender' (Railway Magazine), pp. 371–374
  27. ^ Boddy, Neve & Yeadon 1973, pp. 68–69
  28. ^ a b Brown: Nigel Gresley, p. 119
  29. ^ Clay, John F. 'How good were the original Gresley Pacifies?' pp.25–26
  30. ^ Windle, E.: 'Some notes relating to cylinder performance' (Journal of the Institution of Locomotive Engineers), pp. 178–197 (Paper No. 272)
  31. ^ Clay, John F. 'How good were the original Gresley Pacifics?' in Hughes, Geoffrey: A Gresley anthology, pp. 25–26
  32. ^ Allen, C.J.: 'The L.N.E.R. world records: 108 km/h (67 mph) maximum and 300 mi (480 km) at 80 mph (130 km/h)' (Railway Magazine), p. 238–239
  33. ^ a b c Herring: Classic British Steam Locomotives p. 106
  34. ^ Rogers, HCB: Thompson and Peppercorn - Locomotive Engineers, p. 52
  35. ^ Chapelon/Carpenter, La locomotive à vapeur, pp. 121–124
  36. ^ Reed, Brian: LNER non-streamlined Pacifics, p. 22
  37. ^ News, Save Our Scotsman, accessed 14 February 2011
  38. ^ The Rev. W., Awdry; G Awdry (1987). The Island of Sodor, its People, History, and Railways. Kaye & Ward. p. 128. ISBN 0 434 92762 7. 
  39. ^ http://www.bassettlowke.co.uk/products.html


  • Allen, C.J.: 'The L.N.E.R. world records: 108 m.p.h. maximum and 300 miles at 80 m.p.h.' (Railway Magazine: 76, 1935)
  • Awdry, Rev. Wilbert: The Island of Sodor, its People, History, and Railways, a commentary on the world of The Railway Series (1987)
  • Boddy, M.G.; Neve, E.; Yeadon, W.B. (April 1973). Fry, E.V.. ed. Part 2A: Tender Engines - Classes A1 to A10. Locomotives of the L.N.E.R.. Kenilworth: RCTS. ISBN 0 901115 25 8. 
  • Brown, F.A.S: Nigel Gresley, Locomotive Engineer (Ian Allan, London, UK, 1961)
  • Chapelon, André; English translation by Carpenter, George: La locomotive à vapeur (Bath, UK: Camden Steam Services, UK 2000) ISBN 0 9536523 0 0
  • Clay, John F. 'How good were the original Gresley Pacifics?' in Hughes, Geoffrey: A Gresley anthology (Didcot: Wild Swan/Gresley Society, 1994)
  • Herring, Peter: Classic British Steam Locomotives (Abbeydale Press: London, 2000) Section "A1/A3 Class"
  • 'Higher steam pressure on the L. & N.E. Railway' (Locomotive, Railway Carriage and Wagon Review: 33, 1927)
  • Hind J.R.: The Book of the Railway (London & Glasgow, UK: Collins clear-type press, No Publication date, but certainly around 1935/6)
  • le Fleming, H.M. (November 1960) [1953]. White, D.E.. ed. Part 8: Modern Passenger Classes. The Locomotives of the Great Western Railway (2nd ed.). Kenilworth: RCTS. ISBN 0 901115 19 3. 
  • 'London to Edinburgh non-stop new L.N.E.R. train services and the first corridor tender' (Railway Magazine: 62, 1928)
  • 'New Pacific type locomotives, L. & N.E. Railway' (Locomotive, Railway Carriage and Wagon Review: 34, 1928)
  • Nock, O.S.: The Locomotives of Sir Nigel Gresley (London: The Railway Publishing Co., 1945)
  • Reed, Brian: LNER non-streamlined Pacifics (Profile Publications Berks UK - no date)
  • Rogers, HCB: Thompson and Peppercorn - Locomotive Engineers (Surrey UK: Ian Allan, 1979) ISBN 0 7110 0910
  • '[Smoke Deflection Experiments on] No.2751' (Railway Magazine: 71, 1932)
  • Stauffer, Alvin F. : Pennsy Power (Alvin F. Stauffer USA 1962 Library of Congress Cat. no. 62 20878)
  • Weight, R.A.H.: Great Northern Locomotives 1847–1947 (Hastings: Published by the Author, 1947)
  • Westing, F. & Stauffer, A. : Erie Power: Steam and diesel locomotives of the Erie Railroad from 1840 to 1970 (Alvin F. Stauffer, Ohio, USA, 1970, Library of Congress Cat. card 70-124567)
  • Windle, E.: 'Some notes relating to cylinder performance' (Journal of the Institution of Locomotive Engineers: 21, 1931), (Paper No. 272)

External links

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • LNER-Klasse A3 — LNER Klassen A1 und A3 Nummerierung: A1: 2543–2582, 4470–4481 A3: 2500–2508, 2595–2599, 2743–2752, 2795–2797 Anzahl: 79 Baujahr(e): A1: 1922–1924 A3: 1928–193 …   Deutsch Wikipedia

  • LNER Class A4 4498 Sir Nigel Gresley — Infobox Locomotive name= Sir Nigel Gresley powertype=Steam gauge=RailGauge|sg caption=4498 Sir Nigel Gresley at the Rocket 150 celebrations railroad=London and North Eastern Railway railroadclass=A4 roadnumber=4498, renum 7 in 1946, renum 60007… …   Wikipedia

  • LNER Class A4 4464 Bittern — Infobox Locomotive name= Bittern powertype=Steam gauge=RailGauge|sg London and North Eastern Railway officialname= Bittern railroadclass=A4 builddate=December 18th 1937 roadnumber=4464, renum 19, renum 60019 currentowner=Privately owned… …   Wikipedia

  • LNER Peppercorn Class A2 — See also LNER Thompson Class A2 and Raven Class A2 LNER Peppercorn Class A2 60535 Hornets Beauty at Gainsborough Central railway …   Wikipedia

  • LNER Class A4 — 60009 Union of South Africa in 1951 Power type Steam Designer …   Wikipedia

  • LNER Class A4 4468 Mallard — Mallard Mallard at the National Railway Museum at York. Power type Steam Designer Sir Nigel Gresley Builder LNER Doncaster Works …   Wikipedia

  • LNER Class A4 4488 Union of South Africa — Infobox Locomotive name= Union of South Africa powertype=Steam gauge=RailGauge|sg caption= Union of South Africa at Bridgnorth on the Severn Valley Railway railroad=London and North Eastern Railway officialname= Union of South Africa… …   Wikipedia

  • LNER Class A4 4489 Dominion of Canada — Infobox Locomotive name= Dominion of Canada powertype=Steam gauge=RailGauge|sg caption=The Dominion of Canada at the Canadian Railway Museum in 2003 railroad=London and North Eastern Railway officialname= Dominion of Canada railroadclass=A4… …   Wikipedia

  • LNER Class A4 4468 Mallard — Для улучшения этой статьи желательно?: Переработать оформление в соответствии с правилами написания статей. Викифицировать статью …   Википедия

  • LNER Class A4 4496 Dwight D Eisenhower — Infobox Locomotive name= Dwight D Eisenhower powertype=Steam gauge=RailGauge|sg caption= Dwight D. Eisenhower on display at the National Railroad Museum on April 26 2004 railroad=London and North Eastern Railway roadnumber=4496, renum 8 in 1946,… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”