- Alkyne trimerisation
-
An alkyne trimerisation reaction is a 2+2+2 cyclization reaction in which three alkyne molecules react to form an aromatic compound. The reaction is 'pseudo' pericyclic since it has not been observed to occur without the assistance of metal catalysis; and the metal catalyst assembles the ring stepwise via intermediates which are not directly in between (in a geometric sense) the starting material and products.[1]
Contents
Introduction
In 1866, Berthelot reported the first example of cyclotrimerization leading to aromatic products, the cyclization of acetylene to benzene.[2] The reaction required very high temperatures to proceed (400 °C) and produced a complex mixture of products, and research in the field remained dormant until the late 1940s. In 1948, Reppe discovered that nickel could catalyze the formation of substituted benzenes from acetylenic compounds;[3] since his initial discovery, cyclotrimerizations to produce substituted benzenes have been catalyzed by no less than seventeen transition metals, including:
- Group 4 (Ti, Zr)[4]
- Group 5 (V, Nb)[5]
- Group 6 (Mo, W)[6]
- Group 8 (Fe, Ru, Os)[7]
- Group 9 (Co, Rh, Ir)[8]
- Group 10 (Pd)[9]
- Group 11 (Cu)[10]
Advantages: Control of the substitution pattern of the aromatic product is good in many cases, and cyclotrimerization can be used in cases when functionalization of pre-formed aromatic materials (through electrophilic aromatic substitution, for instance) is not selective. The reaction is highly chemoselective for triple bonds and can tolerate a wide variety of functional groups on the starting materials.
Disadvantages: For cotrimerizations involving two or three different acetylenes, a variety of regioisomers may form. Operationally, these reactions usually require elevated temperatures (>60 °C) and sometimes require irradiation to facilitate the dissociation of strongly binding carbon monoxide ligands. Catalyst deactivation can occur through the formation of stable, 18-electron η4-complexes incorporating cyclobutadiene,[11] cyclohexadiene, and arene ligands. The most problematic side products of the reaction are due to cyclotetramerization (leading to cyclooctatetraenes) and alkyne dimerization (leading to enynes).
Mechanism and Stereochemistry
Prevailing Mechanism
The most common mechanism for the cyclotrimerization of acetylenes begins with the formation of a metallocyclopentadiene complex. Oxidative cyclization of two coordinated alkyne units produces either metallocycle 3 or 4.[12] After dissociation of a third ligand and coordination of a third alkyne, two pathways are possible. Either alkyne insertion generates metallocycloheptatriene 5, or [4+2] cycloaddition generates bridged bicycle 6. The former pathway is questionable however, as reductive elimination from a metallocycloheptatriene to form an arene is symmetry forbidden.[13] A third pathway proposed for ruthenium catalysts involves formal [2+2] cycloaddition of the alkyne followed by rearrangement, reductive elimination, and arene decomplexation. The intermediacy of bicycle 7 was supported by DFT calculations.[14]
For cyclotrimerization reactions of asymmetrically substituted acetylenes, a number of regioisomeric products are possible. The substitution pattern about the product arene depends on two events: formation of the metallocyclopentadiene intermediate and incorporation of the third equivalent of alkyne. Although both head-to-head and tail-to-tail metallocyclopentadienes lead to 1, a number of acetylenic substrates selectively form regioisomers of type 2. Steric bulk on the alkyne coupling partners and catalyst have been invoked as the controlling elements of regioselectivity.[15]
Enantioselective Variants
Chiral catalysts have been employed in combination with arynes to produce non-racemic amounts of atropisomeric products.[16] Selective cyclotrimerization of one of a pair of enantiotopic alkynes has also been facilitated by a chiral catalyst.[17]
Scope and Limitations
Catalysts for cyclotrimerization are highly selective for triple bonds, which gives the reaction a fairly wide substrate scope. Alcohols, ethers, amines, and carbonyl compounds (ketones, esters, amides, and carboxylic acids) are well tolerated. Other than carbonyl compounds, the reaction is not generally compatible with unsaturated functionality. Nitriles, for instance, can react to form pyridines.
The reaction is limited in some cases by catalyst deactivation due to the formation of stable, 18-electron η4-complexes.[18] Cyclobutadiene, cyclohexadiene, and arene complexes have all been observed as off-cycle, inactivate catalyst forms. In addition to high-order polymers and dimers and trimers, which originate from low regio- and chemoselectivities, enyne side products derived from alkyne dimerization have been observed. Rhodium catalysts are particularly adept at enyne formation (see below).[19] For nickel catalysis, formation of larger rings (particularly cyclooctatetraene) can be a problem.
Synthetic Applications
Cyclization of diynes with a separate alkyne can provide fused ring systems with high atom economy. In a striking example in the synthesis of estrone, diyne 8 was combined with di(trimethylsilyl)acetylene to produce benzocyclobutane 9.[20] Upon heating, ring-opening produced a quinone methide that participated in a subsequent intramolecular Diels-Alder reaction.
If the third alkyne unit is tethered to the first two, three rings can be created in a single step. In the example below in the synthesis of calomelanolactone, Wilkinson's catalyst was used to catalyze an intramolecular cotrimerization of triyne 10.[21]
Crowded triynes can cyclize to products exhibiting helical chirality. In one example, highly favorable due to the formation of three new aromatic rings in one step, triyne 12 transforms to helical product 13 in the presence of cyclopentadienylcobalt dicarbonyl.[22] As of 2004, this process had yet to be rendered asymmetric, but the products could be separated through chiral HPLC.
Comparison with Other Methods
Cyclotrimerization presents an alternative to the functionalization of pre-formed aromatic compounds through electrophilic or nucleophilic substitution, the regioselectivity of which can sometimes be difficult to control.
Other methods for the direct formation of aromatic rings from substituted, unsaturated precursors include the Dötz reaction, palladium-catalyzed [4+2] benzannulation of enynes with alkynes,[23] and Lewis-acid-mediated [4+2] cycloaddition of enynes with alkynes.[24] Cyclization of transient benzyne species with alkynes, catalyzed by palladium, can also produce substituted aromatic compounds.[25]
Experimental Conditions and Procedure
Typical Conditions
Although various experimental conditions have been used to perform this reaction, commercially available CpCo(CO)2 remains the most common catalyst used. High temperatures and irradiation with light are often required in order to facilitate the dissociation of carbon monoxide from the catalyst.
Example Procedure[26]
1,2-Bis(propiolyl)benzene (350 mg, 2.3 mmol) was dissolved in diglyme (8 mL) and added over a period of 36 hours (with a syringe pump) to a refluxing solution of bis(trimethylsilyl)acetylene (5 mL) and CpCo(CO)2 (60 µL) in n-octane (70 mL), under a dry N2 atmosphere. Removal of the solvent and unreacted BTMSA by vacuum transfer followed by column chromatography on silica gel (100 g) (pentane:ether = 80:20) gave a yellow oil which solidified on standing. Recrystallization of the crude solid from methanol gave orange crystals of the title anthraquinone (120 mg, 15 %), mp 69–71.5°: IR (CCl4) 2900, 1670, 1540, 1320, 1290, 1250, 1005, 980, 952, 932 cm–1; 1H NMR δ 1.50 (s, 2H), 1.70 (m, 2H), 2.23 (m, 2H), 9.51 (s, 18H); EIMS m/z (relative intensity): M+ 352 (14), 337 (17), 73 (67), 57 (79), 55 (77), 43 (100), 41 (67).
References
- ^ Agenet, N.; Buisine, O.; Slowinski, F.; Gandon, V.; Aubert, C.; Malacria, M. (2007). "Cotrimerizations of Acetylenic Compounds". Org. React. 68: 1–302. doi:10.1002/0471264180.or068.01.
- ^ Schetter, M.C.R. (1866). Hebd. Seances Acad. Sci. 62: 905.
- ^ Reppe, W.; Schweckendiek, W. (1948). "Cyclisierende Polymerisation von Acetylen. III Benzol, Benzolderivate und hydroaromatische Verbindungen". Liebigs Ann. Chem. 560: 104. doi:10.1002/jlac.19485600104.
- ^ Musso, F.; Solari, E.; Floriani, C. (1997). "Hydrocarbon Activation with Metal Halides: Zirconium Tetrachloride Catalyzing the Jacobsen Reaction and Assisting the Trimerization of Alkynes via the Formation of η6-Arene−Zirconium(IV) Complexes". Organometallics 16 (22): 4889. doi:10.1021/om970438g.
- ^ Rodriguez, J. G.; Martin-Villamil, R.; Fonseca, I. (1997). J. Chem. Soc., Perkin Trans. 1: 945.
- ^ Sakurai, H.; Nakadaira, Y.; Hosomi, A.; Eriyama, Y.; Hirama, K.; Kabuto, C. (1984). "Chemistry of organosilicon compounds. 193. Intramolecular cyclotrimerization of macrocylic and acyclic triynes with Group 6 metal carbonyls. The formation of fulvene and benzene". J. Am. Chem. Soc. 106 (26): 8315. doi:10.1021/ja00338a063.
- ^ Reppe, W.; Vetter, H. (1953). Liebigs Ann. Chem. 585: 133.
- ^ Amer, I.; Bernstein, T.; Eisen, M.; Blum, J.; Vollhardt, K. P. C. (1990). "Oligomerization of alkynes by the RhCl3-aliquat 336 catalyst system Part 1. Formation of benzene derivatives". J. Mol. Catal. 60 (3): 313. doi:10.1016/0304-5102(90)85254-F.
- ^ Lee, C. L.; Hunt, C. T.; Balch, A. L. (1981). "Novel reactions of metal-metal bonds. Reactions of Pd2{C6H5)2PCH2P(C6H5)2}2Cl2 with acetylenes, olefins, and isothiocyanates". Inorg. Chem. 20: 2498. doi:10.1021/ic50222a026.
- ^ Aalten, H. L.; van Koten, G.; Riethorst, E.; Stam, C. H. (1989). "The Hurtley reaction. 2. Novel complexes of disubstituted acetylenes with copper(I) benzoates having a reactive ortho carbon-chlorine or carbon-bromine bond. X-ray structural characterization of tetrakis(2-chlorobenzoato)bis(diethyl acetylenedicarboxylate)tetracopper(I)". Inorg. Chem. 28 (22): 4140. doi:10.1021/ic00321a020.
- ^ Yamazaki, H.; Hagihara, N. (1970). "Preparations and reactions of alkylcobalt complexes and diphenylacetylenecobalt complexes having a π-cyclopentadienyl group as a ligand". J. Organomet. Chem. 21 (2): 431. doi:10.1016/S0022-328X(00)83645-1.
- ^ Collman, J. P.; Kang, J. W.; Little, W. F.; Sullivan, M. F. (1968). "Metallocyclopentadiene complexes of iridium and rhodium and their role in the catalytic cyclotrimerization of disubstituted acetylenes". Inorg. Chem. 7 (7): 1298. doi:10.1021/ic50065a007.
- ^ Hardesty, J. H.; Koerner, J. B.; Albright, T. A.; Lee, G. B. (1999). "Theoretical Study of the Acetylene Trimerization with CpCo". J. Am. Chem. Soc. 121 (25): 6055. doi:10.1021/ja983098e.
- ^ Kirchner, K.; Calhorda, M. J.; Schmid, R.; Veiros, L. F. (2003). "Mechanism for the cyclotrimerization of alkynes and related reactions catalyzed by CpRuCl". J. Am. Chem. Soc. 125 (38): 11721. doi:10.1021/ja035137e. PMID 13129377.
- ^ Ozerov, O. V.; Patrick, B. O.; Ladipo, F. T. (2000). "Highly Regioselective [2 + 2 + 2] Cycloaddition of Terminal Alkynes Catalyzed by η6-Arene Complexes of Titanium Supported by Dimethylsilyl-Bridgedp-tert-Butyl Calix[4]arene Ligand". J. Am. Chem. Soc 122 (27): 6423. doi:10.1021/ja994543o.
- ^ Gutnov, A.; Heller, B.; Fisher, C.; Drexler, H. J.; Spannenberg, A.; Sundermann, B.; Sundermann, C. (2004). Angew Chem. Int. Ed. Engl. 43: 2.
- ^ Sato, Y.; Nishimata, T.; Mori, M. (1997). "Novel Synthesis of Heterocycles Using Nickel(0)-catalyzed [2+2+2] Cocyclization: Catalytic Asymmetric Synthesis of Isoindoline and Isoquinoline Derivatives". Heterocycles 44: 443. doi:10.3987/COM-96-S43.
- ^ Kölle, U.; Fuss, B. (1986). "Pentamethylcyclopentadienyl-Übergangsmetall-Komplexe, X. Neue Co-Komplexe aus η5-C5Me5Co-Fragmenten und Acetylenen". Chem. Ber. 119: 116. doi:10.1002/cber.19861190112.
- ^ Ardizzoia, G. A.; Brenna, S.; Cenini, S.; LaMonica, G.; Masciocchi, N.; Maspero, A. (2003). J. Mol. Catal. A: Chemical: 204–205, 333.
- ^ Funk, R. L.; Vollhardt, K. P. C. (1980). "Transition-metal-catalyzed alkyne cyclizations. A cobalt-mediated total synthesis of dl-estrone". J. Am. Chem. Soc. 102 (16): 5253. doi:10.1021/ja00536a023.
- ^ Neeson, S. J.; Stevenson, P. J. (1988). "Rhodium catalysed [2+2+2] cycloadditions- an efficient regiospecific route to calomelanolactone". Tetrahedron Lett. 29 (7): 813. doi:10.1016/S0040-4039(00)80217-8.
- ^ Teply, F.; Stara, I. G.; Stary, I.; Kollarovic, A.; Saman, D.; Rulisek, L.; Fiedler, P. (2002). "Synthesis of 5-, 6-, and 7helicene via Ni(0)- or Co(I)-catalyzed isomerization of aromatic cis,cis-dienetriynes". J. Am. Chem. Soc. 124 (31): 9175. doi:10.1021/ja0259584. PMID 12149022.
- ^ Gevorgyan, V.; Takeda, A.; Homma, M.; Sadayori, N.; Radhakrishnan, U.; Yamamoto, Y. (1999). "Palladium-Catalyzed [4+2]Cross-Benzannulation Reaction of Conjugated Enynes with Diynes and Triynes". J. Am. Chem. Soc. 121 (27): 6391. doi:10.1021/ja990749d.
- ^ Wills, M. S. B.; Danheiser, R. L. (1998). "Intramolecular [4 + 2] Cycloaddition Reactions of Conjugated Ynones. Formation of Polycyclic Furans via the Generation and Rearrangement of Strained Heterocyclic Allenes". J. Am. Chem. Soc. 120 (36): 9378. doi:10.1021/ja9819209.
- ^ Sato, Y.; Tamura, T.; Mori, M. (2004). "Arylnaphthalene lignans through Pd-Catalyzed 2+2+2 cocyclization of arynes and diynes: total synthesis of Taiwanins C and E". Angew. Chem. Int. Ed. Engl. 43 (18): 2436. doi:10.1002/anie.200453809. PMID 15114584.
- ^ Hillard III, R. L.; Vollhardt, K. P. C. (1977). "Substituted benzocyclobutenes, indans, and tetralins via cobalt-catalyzed cooligomerization of .alpha.,.omega.-diynes with substituted acetylenes. Formation and synthetic utility of trimethylsilylated benzocycloalkenes". J. Am. Chem. Soc. 99 (12): 4058. doi:10.1021/ja00454a026.
Categories:- Carbon-carbon bond forming reactions
- Cycloadditions
- Multiple component reactions
Wikimedia Foundation. 2010.