Expansion card

Expansion card
Example of a PCI Digital I/O Expansion Card.

The expansion card (also expansion board, adapter card or accessory card) in computing is a printed circuit board that can be inserted into an expansion slot of a computer motherboard or backplane to add functionality to a computer system via the expansion bus.

One edge of the expansion card holds the contacts (the edge connector) that fit exactly into the slot. They establish the electrical contact between the electronics (mostly integrated circuits) on the card and on the motherboard.

Connectors mounted on the bracket allow the connection of external devices to the card. Depending on the form factor of the motherboard and case, around one to seven expansion cards can be added to a computer system. 19 or more expansion cards can be installed in backplane systems. There are also other factors involved in expansion card capacity. For example, most graphics cards on the market as of 2010 are dual slot graphics cards, using the second slot as a place to put an active heat sink with a fan.

Some cards are "low-profile" cards, meaning that they are shorter than standard cards and will fit in a lower height computer chassis. (There is a "low profile PCI card" standard[1] that specifies a much smaller bracket and board area). The group of expansion cards that are used for external connectivity, such as network, SAN or modem cards, are commonly referred to as input/output cards (or I/O cards).

The primary purpose of an expansion card is to provide or expand on features not offered by the motherboard. For example, the original IBM PC did not provide graphics or hard drive capability. In that case, a graphics card and an ST-506 hard disk controller card provided graphics capability and hard drive interface respectively.

In the case of expansion of on-board capability, a motherboard may provide a single serial RS232 port or Ethernet port. An expansion card can be installed to offer multiple RS232 ports or multiple and higher bandwidth Ethernet ports. In this case, the motherboard provides basic functionality but the expansion card offers additional or enhanced ports.



The first commercial microcomputer to feature expansion slots was the Micral N, in 1973. The first to establish a de facto standard was the Altair 8800, developed 1974-1975. Initially, bus implementations were proprietary (such as the Apple II and Macintosh), but by the late 1970s manufacturers of Intel 8080/Zilog Z80-based computers running CP/M had settled around the S-100 standard. IBM introduced the Industry Standard Architecture (ISA) bus, with the IBM PC in 1981; it was then called the PC bus. The IBM XT, introduced in 1983, used the same bus (with slight exception). XT (a.k.a. 8-bit ISA) was replaced with ISA (a.k.a. 16-bit ISA), originally known as AT bus, in 1984. IBM's MCA bus, developed for the PS/2 in 1987, was a competitor to ISA, also their design, but fell out of favor due to the ISA's industry-wide acceptance and IBM's closed licensing of MCA. EISA, the 32-bit extended version of ISA championed by Compaq, was used on some PC motherboards until 1997, when Microsoft declared it a "legacy" subsystem in the PC 97 industry white-paper. Proprietary local buses (q.v. Compaq) and then the VESA Local Bus Standard, were late 1980s expansion buses that were tied but not exclusive[2][3][4] to the 80386 and 80486 CPU bus. The PC/104 bus is an embedded bus that copies the ISA bus.

Intel launched their PCI bus chipsets along with the P5-based Pentium CPUs in 1993. The PCI bus was introduced in 1991 as replacement for ISA. The standard (now at version 3.0) is found on PC motherboards to this day. The PCI standard supports Bridging, as many as ten daisy chained PCI buses have been tested. Cardbus, using the PCMCIA connector, is a PCI format that attaches peripherals to the Host PCI Bus via PCI to PCI Bridge. Cardbus is being supplanted by ExpressCard format. Intel introduced the AGP bus in 1997 as a dedicated video acceleration solution. AGP devices are logically attached to the PCI bus over a PCI-to-PCI bridge. Though termed a bus, AGP usually supports only a single card at a time (Legacy BIOS support issues). From 2005 PCI-Express has been replacing both PCI and AGP. This standard, approved [by who?] in 2004, implements the logical PCI protocol over a serial communication interface. PC/104(-Plus) or Mini PCI are often added for expansion on small form factor boards such as Mini-ITX.

The USB format has become a de facto expansion bus standard especially for laptop computers. All the functions of add-in card slots can currently be duplicated by USB, including Video,[5][6] networking, storage and audio. USB 2.0 is currently part of the ExpressCard interface and USB 3.0 is part of the ExpressCard 2.0 standard.

FireWire or IEEE 1394 is a serial expansion bus originally promoted for Apple Inc. Computer expansion replacing the SCSI bus. Also adopted for PCs, often used for storage and video cameras, it has application for networking, video, and audio.

After the S-100 bus, this article above mentions only buses used on IBM-compatible/Windows-Intel PCs. Most other computer lines that were not IBM compatible, including those from Apple Inc.(Apple II, Macintosh), Tandy, Commodore, Amiga, and Atari, offered their own expansion buses. Apple used a proprietary system with seven 50-pin-slots for Apple II peripheral cards, then later used the NuBus for its Macintosh series until 1995, at which time they switched to a standard PCI Bus. Generally PCI expansion cards will function on any CPU platform if there is a software driver for that type. PCI video cards and other cards that contain a BIOS are problematic, although video cards conforming to VESA Standards may be used for secondary monitors. DEC Alpha, IBM PowerPC, and NEC MIPS workstations used PCI bus connectors.[7]

Even many video game consoles, such as the Sega Genesis, included expansion buses; at least in the case of the Genesis, the expansion bus was proprietary, and in fact the cartridge slots of many cartridge based consoles (not including the Atari 2600) would qualify as expansion buses, as they exposed both read and write capabilities of the system's internal bus. However, the expansion modules attached to these interfaces, though functionally the same as expansion cards, are not technically expansion cards, due to their physical form.

For their 1000 EX and 1000 HX models, Tandy Computer designed the PLUS expansion interface, an adaptation of the XT-bus supporting cards of a smaller form factor. Because it is electrically compatible with the XT bus (a.k.a. 8-bit ISA or XT-ISA), a passive adapter can be made to connect XT cards to a PLUS expansion connector. Another feature of PLUS cards is that they are stackable. Another bus that offered stackable expansion modules was the "sidecar" bus used by the IBM PCjr. This may have been electrically the same as or similar to the XT bus; it most certainly had some similarities since both essentially exposed the 8088 CPU's address and data buses, with some buffering and latching, the addition of interrupts and DMA provided by Intel add-on chips, and a few system fault detection lines (Power Good, Memory Check, I/O Channel Check). Again, PCjr sidecars are not technically expansion cards, but expansion modules, with the only difference being that the sidecar is an expansion card enclosed in a plastic box (with holes exposing the connectors).

Expansion slot standards

Expansion card types


External links

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • expansion card — ➔ card * * * expansion card UK US noun [C] IT ► a board covered with small metal electrical connections that create one or more circuits and that can be connected to the main circuit board of a computer so that it can do more things: »Installing… …   Financial and business terms

  • Expansion Card —   [engl.], Erweiterungskarte …   Universal-Lexikon

  • expansion card — UK / US noun [countable] Word forms expansion card : singular expansion card plural expansion cards computing a circuit board that makes a computer more powerful or able to do more things …   English dictionary

  • expansion card — noun : a circuit board connecting to a computer motherboard and controlling a peripheral device which expands the capabilities of the computer * * * exˈpansion card 7 [expansion card] (also ˈadd in) noun ( …   Useful english dictionary

  • expansion card — card which connects to the motherboard and allows the performance of various operations …   English contemporary dictionary

  • expansion card — expan′sion card n. cmp cmp a card in a computer on which additional chips can be mounted to expand the computer s capabilities …   From formal English to slang

  • expansion card — Computers. a card in a computer on which additional chips can be mounted to expand the computer s capabilities. * * * …   Universalium

  • expansion card — ex pansion .card n a ↑circuit board that fits into a computer and makes it possible for the computer to do more things, for example play sounds or video pictures, or use a telephone line …   Dictionary of contemporary English

  • expansion card — (also expansion board) noun a circuit board that can be inserted in a computer to give extra facilities or memory …   English new terms dictionary

  • expansion card — noun Date: 1982 a circuit board connecting to a motherboard which expands the capabilities of a computer …   New Collegiate Dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”