Computer form factor

Computer form factor
For computers form factors both larger and smaller than desktop personal computers, see list of computer size categories.

In computing, a form factor specifies the physical dimensions of major system components. Specifically, in the IBM PC compatible industry, standard form factors ensure that parts are interchangeable across competing vendors and generations of technology, while in enterprise computing, form factors ensure that server modules fit into existing rackmount systems. Traditionally, the most significant specification is for that of the motherboard, which generally dictates the overall size of the case. Small form factors have been developed and implemented, but further reduction in overall size is hampered by current power supply technology.

Contents

Overview of form factors

Pictorial comparison of some common computer form factors.

A PC motherboard is the main circuit board within a typical desktop computer, laptop or server. Its main functions are as follows:

  • to serve as a central backbone to which all other modular parts such as CPU, RAM, and hard drives can be attached as required to create a modern computer;
  • to accept (on many motherboards) different components (in particular CPU and expansion cards) for the purposes of customization;
  • to distribute power to PC components;
  • to electronically co-ordinate and interface the operation of the components.

As new generations of components have been developed, the standards of motherboards have changed too; for example, with AGP being introduced, and more recently PCI Express. However, the standardized size and layout of motherboard have changed much more slowly, and are controlled by their own standards. The list of components a motherboard must include changes far more slowly than the components themselves. For example, north bridge controllers have changed many times since their introduction, with many manufacturers bringing out their own versions, but in terms of form factor standards, the requirement to allow for a north bridge has remained fairly static for many years.

Although it is a slower process, form factors do evolve regularly in response to changing demands. The original PC standard (AT) was superseded in 1995 by the current industry standard ATX, which still dictates the size and design of the motherboard in most modern PCs. The latest update to the ATX standard was released in 2007. A divergent standard by chipset manufacturer VIA called EPIA (also known as ITX, and not to be confused with EPIC) is based upon smaller form factors and its own standards.

Differences between form factors are most apparent in terms of their intended market sector, and involve variations in size, design compromises and typical features. Most modern computers have very similar requirements, so form factor differences tend to be based upon subsets and supersets of these. For example, a desktop computer may require more sockets for maximal flexibility and many optional connectors and other features on-board, whereas a computer to be used in a multimedia system may need to be optimized for heat and size, with additional plug-in cards being less common. The smallest motherboards may sacrifice CPU flexibility in favor of a fixed manufacturer's choice.

Comparisons

Tabular information

Form factor Originated Max. size Typical feature-set
(compared to ATX)
Typical CPU
flexibility
Power handling Notes
(typical usage, Market adoption, etc.)
XT IBM 1983 8.5 × 11 in
216 × 279 mm
Obsolete, see Industry Standard Architecture. The IBM Personal Computer XT was the successor to the original IBM PC, its first home computer. As the specifications were open, many clone motherboards were produced and it became a de facto standard.
AT (Advanced Technology) IBM 1984 12 × 11–13 in
305 × 279–330 mm
Obsolete, see Industry Standard Architecture. Created by IBM for the IBM Personal Computer/AT, an Intel 80286 machine. Also known as Full AT, it was popular during the era of the Intel 80386 microprocessor. Superseded by ATX.
Baby-AT IBM 1985 8.5 × 10–13 in
216 × 254–330 mm
IBM's 1985 successor to the AT motherboard. Functionally equivalent to the AT, it became popular due to its significantly smaller size.
ATX Intel 1996 12 × 9.6 in
305 × 244 mm
Created by Intel in 1995. As of 2007, it is the most popular form factor for commodity motherboards. Typical size is 9.6 × 12 in although some companies extend that to 10 × 12 in.
SSI CEB SSI 12 × 10.5 in
305 × 267 mm
Created by the Server System Infrastructure (SSI) forum. Derived from the EEB and ATX specifications. This means that SSI CEB motherboards have the same mounting holes and the same IO connector area as ATX motherboards.
SSI EEB SSI 12 × 13 in
305 × 330 mm
Created by the Server System Infrastructure (SSI) forum. Derived from the EEB and ATX specifications. This means that SSI CEB motherboards have the same mounting holes and the same IO connector area as ATX motherboards.
SSI MEB SSI 16.2 × 13 in
411 × 330 mm
Created by the Server System Infrastructure (SSI) forum. Derived from the EEB and ATX specifications. This means that SSI CEB motherboards have the same mounting holes and the same IO connector area as ATX motherboards.
microATX 1996 9.6 × 9.6 in
244 × 244 mm
A smaller variant of the ATX form factor (about 25% shorter). Compatible with most ATX cases, but has fewer slots than ATX, for a smaller power supply unit. Very popular for desktop and small form factor computers as of 2007.
Mini-ATX AOpen 2005 5.9 × 5.9 in
150 × 150 mm
Mini-ATX is slightly smaller than Micro-ITX. Mini-ATX motherboards were design with MoDT (Mobile on Desktop Technology) which adapt mobile CPU for lower power requirement, less heat generation and better application capability.
FlexATX Intel 1999 9.0 × 7.5 in
228.6 × 190.5 mm max.
A subset of microATX developed by Intel in 1999. Allows more flexible motherboard design, component positioning and shape. Can be smaller than regular microATX.
Mini-ITX VIA 2001 6.7 × 6.7 in
170 × 170 mm max.
A small, highly-integrated form factor, designed for small devices such as thin clients and set-top boxes.
Nano-ITX VIA 2003 4.7 × 4.7 in
120 × 120 mm
Targeted at smart digital entertainment devices such as PVRs, set-top boxes, media centers and Car PCs, and thin devices.
Pico-ITX VIA 2007 100 × 72 mm max.
Mobile-ITX VIA 2007 2.953 × 1.772 in
75 × 45 mm
BTX (Balanced Technology Extended) Intel 2004 12.8 × 10.5 in
325 × 267 mm max.
A standard proposed by Intel as a successor to ATX in the early 2000s, according to Intel the layout has better cooling. BTX Boards are flipped in comparison to ATX Boards, so a BTX or MicroBTX Board needs a BTX case, while an ATX style board fits in an ATX case. The RAM slots and the PCI slots are parallel to each other.

Processor is placed closest to the fan. May contain a CNR board.

MicroBTX (or uBTX) Intel 2004 10.4 × 10.5 in
264 × 267 mm max.
PicoBTX Intel 2004 8.0 × 10.5 in
203 × 267 mm max.
DTX AMD 2007 200 × 244 mm max.
Mini-DTX AMD 2007 200 × 170 mm max.
smartModule Digital-Logic 66 × 85 mm Used in embedded systems and single board computers. Requires a baseboard.
ETX Kontron 95 × 114 mm Used in embedded systems and single board computers. Requires a baseboard.
COM Express Basic PICMG 95 × 125 mm Used in embedded systems and single board computers. Requires a carrier board.
COM Express Compact PICMG 95 × 95 mm Used in embedded systems and single board computers. Requires a carrier board.
nanoETXexpress Kontron 55 × 84 mm Used in embedded systems and single board computers. Requires a carrier board. Also known as COM Express Ultra and adheres to pin-outs Type 1 or Type 10[1]
CoreExpress SFF-SIG 58 × 65 mm Used in embedded systems and single board computers. Requires a carrier board.
Extended ATX (EATX) Unknown 12 × 13 in
305 × 330 mm
Used in rackmount server systems. Typically used for server-class type motherboards with dual processors and too much circuitry for a standard ATX motherboard. The mounting hole pattern for the upper portion of the board matches ATX.
LPX Unknown 9 × 11–13 in
229 × 279–330 mm
Based on a design by Western Digital, it allowed smaller cases than the AT standard, by putting the expansion card slots on a Riser card.[2] Used in slimline retail PCs. LPX was never standardized and generally only used by large OEMs.
Mini-LPX Unknown 8–9 × 10–11 in
203–229 × 254–279 mm
Used in slimline retail PCs.
PC/104™ PC/104 Consortium 1992 3.8 × 3.6 in Used in embedded systems. AT Bus (ISA) architecture adapted to vibration-tolerant header connectors.
PC/104-Plus PC/104 Consortium 1997 3.8 × 3.6 in Used in embedded systems. PCI Bus architecture adapted to vibration-tolerant header connectors.
PCI/104-Express™ PC/104 Consortium 2008 3.8 × 3.6 in Used in embedded systems.
PCI Express architecture adapted to vibration-tolerant header connectors.
PCIe/104™ PC/104 Consortium 2008 3.8 × 3.6 in Used in embedded systems.
PCI/104-Express without the legacy PCI bus.
NLX Intel 1999 8–9 × 10–13.6 in
203–229 × 254–345 mm
A low-profile design released in 1997. It also incorporated a riser for expansion cards, and never became popular.
UTX TQ-Components 2001 88 × 108 mm Used in embedded systems and IPCs. Requires a baseboard.
WTX Intel 1998 14 × 16.75 in
355.6 × 425.4 mm
A large design for servers and high-end workstations featuring multiple CPUs and hard drives.
HPTX EVGA 2008 13.6 × 15 in
345.44 × 381 mm
A large design by EVGA, it has dual-CPU (Intel Xeon 55xx and 56xx) support, Four-Way nVIDIA SLI or ATi Crossfire support, up to 8 3.5in HDD support, and supports 48GB of RAM. Cases need to have at least 9 expansion slots and the required dimensions to be compatible.
XTX 2005 95 × 114 mm Used in embedded systems. Requires a baseboard.

Graphical comparison of physical sizes

This image compares the sizes of common form factors to ISO 216 paper sizes (e.g., A4). (sizes are in mm)
Formfactors.gif

Maximum number of PCI/AGP/PCI-e slots

ATX case compatible:

Specification Number
HPTX 9
ATX 7
MicroATX 4
FlexATX 3
DTX 2
Mini-DTX/DTX 2
Mini-ITX 1

Visual examples of different form factors

PC/104 and EBX

PC/104 is an embedded computer standard which defines both a form factor and computer bus. PC/104 is intended for embedded computing environments. Single board computers built to this form factor are often sold by COTS vendors, which benefits users who want a customized rugged system, without months of design and paper work.

The PC/104 form factor was standardized by the PC/104 Consortium in 1992.[3] An IEEE standard corresponding to PC/104 was drafted as IEEE P996.1, but never ratified.

The 5.75 × 8.0 in Embedded Board eXpandable (EBX) specification, which was derived from Ampro's proprietary Little Board form-factor, resulted from a collaboration between Ampro and Motorola Computer Group.

As compared with PC/104 modules, these larger (but still reasonably embeddable) SBCs tend to have everything of a full PC on them, including application oriented interfaces like audio, analog, or digital I/O in many cases. Also it's much easier to fit Pentium CPUs, whereas it's a tight squeeze (or expensive) to do so on a PC/104 SBC. Typically, EBX SBCs contain: the CPU; upgradeable RAM subassemblies (e.g., DIMM); Flash memory for solid state disk; multiple USB, serial, and parallel ports; onboard expansion via a PC/104 module stack; off-board expansion via ISA and/or PCI buses (from the PC/104 connectors); networking interface (typically Ethernet); and video (typically CRT, LCD, and TV).

Mini PC

Mini PC is a PC form factor very close in size to an external CD or DVD drive.

Examples

References

See also


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Form factor — may refer to:* Form factor (radiative transfer) or emissivity, the proportion of energy transmitted by that object which can be transferred to another object *Form factor (electronics), an alternating current waveform *Electric form factor, the… …   Wikipedia

  • EPIC (form factor) — Embedded Platform for Industrial Computing (EPIC) is a computer form factor standard put forth by a combined effort from WinSystems, VersaLogic, Octagon Systems, Micro/sys, and Ampro Corporations.References* [http://www.epic sbc.com/ The… …   Wikipedia

  • DTX (form factor) — Computer form factors Name PCB size (mm) WTX 356 × 425 AT 350 × 305 Baby AT 330 × 216 BTX …   Wikipedia

  • Small form factor — (SFF) computers are housed in smaller cases than typical desktop computers. While the term has no exact definition, it generally includes cases designed for motherboards smaller than the standard ATX form factor. It generally excludes rack mount… …   Wikipedia

  • AT (form factor) — In the area of IBM compatible personal computers, the AT form factor referred to the dimensions and layout (form factor) of the motherboard for the IBM AT. Like the IBM PC and IBM XT models before it, many third party manufcturers produced… …   Wikipedia

  • BTX (form factor) — BTX (for Balanced Technology Extended) is a form factor for PC motherboards, originally slated to be the replacement for the aging ATX motherboard form factor in late 2004 and early 2005. It has been designed to alleviate some of the issues that… …   Wikipedia

  • Small Form Factor — Mini ITX Platine im Vergleich zu anderen Mainboardgrößen. Small form factor (SFF) ist eine Bezeichnung für Computer, die in Gehäusen betrieben werden, die kleiner als gewöhnliche Computergehäuse sind. Obwohl der Bezeichnung keine genaue… …   Deutsch Wikipedia

  • WTX (form factor) — WTX (for Workstation Technology Extended) was a motherboard form factor specification introduced by Intel at the IDF in September 1998, for its use at high end, multiprocessor, multiple hard disks server and workstations. The specification had… …   Wikipedia

  • ETX (form factor) — ETX, standing for Embedded Technology eXtended, is a highly integrated and compact (3.7 x 4.9 in.) (95 x 125 mm) computer on module (COM) form factor that can be used in a design application much like an integrated circuit component. Each ETX COM …   Wikipedia

  • Comparison of computer form factors — This article compares the IBM compatible personal computer motherboard form factors – that is, the different sizes and specific or de facto standards of major system components. In all cases, at least the motherboard footprint, mounting, and… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”