Discrete time

Discrete time

Discrete time is the discontinuity of a function's time domain that results from sampling a variable at a finite interval. For example, consider a newspaper that reports the price of crude oil once every day at 6:00AM. The newspaper is described as sampling the cost at a frequency of once per 24 hours, and each number that's published is called a sample. The price is not defined by the newspaper in between the times that the numbers were published. Suppose it is necessary to know the price of the oil at 12:00PM on one particular day in the past; one must base the decision on any number of samples that were obtained on the days before and after the event. Such a process is known as interpolation. In general, the sampling period in discrete-time systems is constant, but in some cases nonuniform sampling is also used.

Discrete-time signals are typically written as a function of an index n (for example, x(n) or xn may represent a discretisation of x(t) sampled every T seconds). In contrast to continuous-time systems, where the behaviour of a system is often described by a set of linear differential equations, discrete-time systems are described in terms of difference equations. Most Monte Carlo simulations utilize a discrete-timing method, either because the system cannot be efficiently represented by a set of equations, or because no such set of equations exists. Transform-domain analysis of discrete-time systems often makes use of the Z transform.

Contents

System clock

One of the fundamental concepts behind discrete time is an implied (actual or hypothetical) system clock.[1] If one wishes, one might imagine some atomic clock to be the de facto system clock.

Time signals

Uniformly sampled discrete-time signals can be expressed as the time-domain multiplication between a pulse train and a continuous time signal. This time-domain multiplication is equivalent to a convolution in the frequency domain. Practically, this means that a signal must be bandlimited to less than half the sampling frequency, i.e. Fs/2 - epsilon, in order to prevent aliasing. Likewise, all non-linear operations performed on discrete-time signals must be bandlimited to Fs/2 - epsilon. Wagner's book Analytical Transients proves why equality is not permissible.[2]

Usage: when the phrase "discrete time" is used as a noun it should not be hyphenated; when it is a compound adjective, as when one writes of a "discrete-time stochastic process", then, at least according to traditional punctuation rules, it should be hyphenated. See hyphen for more.

See also

Notes

  1. ^ "... digital systems [...] usually are discretized in time (there is a system clock)", Gershenfeld 1999, p.18
  2. ^ Wagner 1959

References

  • Gershenfeld, Neil A. (1999). The Nature of mathematical Modeling. Cambridge University Press. ISBN 0 521 57095 6. 
  • Wagner, Thomas Charles Gordon (1959). Analytical transients. Wiley. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Discrete-time Fourier transform — In mathematics, the discrete time Fourier transform (DTFT) is one of the specific forms of Fourier analysis. As such, it transforms one function into another, which is called the frequency domain representation, or simply the DTFT , of the… …   Wikipedia

  • discrete time signal — diskretinamojo laiko signalas statusas T sritis radioelektronika atitikmenys: angl. discrete time signal vok. diskretes Zeitsignal, n rus. дискретный сигнал времени, m pranc. signal discret de temps, m …   Radioelektronikos terminų žodynas

  • discrete time signal processing — diskretinamojo laiko signalo apdorojimas statusas T sritis radioelektronika atitikmenys: angl. discrete time signal processing vok. diskrete Zeitsignalverarbeitung, f rus. обработка дискретного сигнала времени, f pranc. traitement du signal de… …   Radioelektronikos terminų žodynas

  • Discrete frequency — is defined as the frequency with which the samples of a discrete sinusoid occur. Just as in its continuous time counterpart (see frequency), the discrete time signal has a time axis, conventionally denoted by n . The time variable n , however,… …   Wikipedia

  • Discrete signal — Discrete sampled signal Digital signal (Discrete here …   Wikipedia

  • Discrete — in science is the opposite of continuous: something that is separate; distinct; individual. This article is about the possible uses of the word discrete . For a definition of the word discreet , see the Wiktionary entry discreet. Discrete may… …   Wikipedia

  • Time-of-flight mass spectrometry — (TOFMS) is a method of mass spectrometry in which ions are accelerated by an electric field of known strength. [Stephens, W. E., [http://link.aps.org/abstract/PR/v69/p674/s2 A Pulsed Mass Spectrometer with Time Dispersion] Phys. Rev. , 1946, 69 …   Wikipedia

  • Time from NPL — Map showing the location of the Anthorn VLF transmitter within Cumbria …   Wikipedia

  • Time domain — is a term used to describe the analysis of mathematical functions, or physical signals, with respect to time. In the time domain, the signal or function s value is known for all real numbers, for the case of continuous time, or at various… …   Wikipedia

  • Discrete Fourier transform — Fourier transforms Continuous Fourier transform Fourier series Discrete Fourier transform Discrete time Fourier transform Related transforms In mathematics, the discrete Fourier transform (DFT) is a specific kind of discrete transform, used in… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”