Parallax

Parallax
A simplified illustration of the parallax of an object against a distant background due to a perspective shift. When viewed from "Viewpoint A", the object appears to be in front of the blue square. When the viewpoint is changed to "Viewpoint B", the object appears to have moved in front of the red square.
This animation is an example of parallax. As the viewpoint moves side to side, the objects in the distance appear to move more slowly than the objects close to the camera.

Parallax is a displacement or difference in the apparent position of an object viewed along two different lines of sight, and is measured by the angle or semi-angle of inclination between those two lines.[1][2] The term is derived from the Greek παράλλαξις (parallaxis), meaning "alteration". Nearby objects have a larger parallax than more distant objects when observed from different positions, so parallax can be used to determine distances.

Astronomers use the principle of parallax to measure distances to celestial objects including to the Moon, the Sun, and to stars beyond the Solar System. For example, the Hipparcos satellite took measurements for over 100,000 nearby stars. This provides a basis for other distance measurements in astronomy, the cosmic distance ladder. Here, the term "parallax" is the angle or semi-angle of inclination between two sight-lines to the star.

Parallax also affects optical instruments such as binoculars, microscopes, and twin-lens reflex cameras that view objects from slightly different angles. Many animals, including humans, have two eyes with overlapping visual fields that use parallax to gain depth perception; this process is known as stereopsis. In computer vision the effect is used for computer stereo vision, and there is a device called a parallax rangefinder that uses it to find range, and in some variations also altitude to a target.

A simple everyday example of parallax can be seen in the dashboard of motor vehicles that use an older-style "needle" speedometer gauge. When viewed from directly in front, the speed may show exactly 60; but when viewed from the passenger seat the needle may appear to show a slightly different speed, due to the angle of viewing.

Contents

Visual perception

This image demonstrates parallax. The Sun is visible above the streetlight. The reflection in the water shows a virtual image of the Sun and the streetlight. The location of the virtual image is below the surface of the water and thus simultaneously offers a different vantage point of the streetlight, which appears to be shifted relative to the stationary, background Sun.

As the eyes of humans and other animals are in different positions on the head, they present different views simultaneously. This is the basis of stereopsis, the process by which the brain exploits the parallax due to the different views from the eye to gain depth perception and estimate distances to objects.[3] Animals also use motion parallax, in which the animals (or just the head) move to gain different viewpoints. For example, pigeons (whose eyes do not have overlapping fields of view and thus cannot use stereopsis) bob their heads up and down to see depth.[4]

Distance measurement in astronomy

Stellar parallax

On an interstellar scale, parallax created by the different orbital positions of the Earth causes nearby stars to appear to move relative to more distant stars. By observing parallax, measuring angles and using geometry, one can determine the distance to various objects. When the object in question is a star, the effect is known as stellar parallax.

Stellar parallax is most often measured using annual parallax, defined as the difference in position of a star as seen from the Earth and Sun, i. e. the angle subtended at a star by the mean radius of the Earth's orbit around the Sun. The parsec (3.26 light-years) is defined as the distance for which the annual parallax is 1 arcsecond. Annual parallax is normally measured by observing the position of a star at different times of the year as the Earth moves through its orbit. Measurement of annual parallax was the first reliable way to determine the distances to the closest stars. The first successful measurements of stellar parallax were made by Friedrich Bessel in 1838 for the star 61 Cygni using a heliometer.[5] Stellar parallax remains the standard for calibrating other measurement methods. Accurate calculations of distance based on stellar parallax require a measurement of the distance from the Earth to the Sun, now based on radar reflection off the surfaces of planets.[6]

The angles involved in these calculations are very small and thus difficult to measure. The nearest star to the Sun (and thus the star with the largest parallax), Proxima Centauri, has a parallax of 0.7687 ± 0.0003 arcsec.[7] This angle is approximately that subtended by an object 2 centimeters in diameter located 5.3 kilometers away.

The fact that stellar parallax was so small that it was unobservable at the time was used as the main scientific argument against heliocentrism during the early modern age. It is clear from Euclid's geometry that the effect would be undetectable if the stars were far enough away, but for various reasons such gigantic distances involved seemed entirely implausible: it was one of Tycho's principal objections to Copernican heliocentrism that in order for it to be compatible with the lack of observable stellar parallax, there would have to be an enormous and unlikely void between the orbit of Saturn and the eighth sphere (the fixed stars).[8]

In 1989, the satellite Hipparcos was launched primarily for obtaining parallaxes and proper motions of nearby stars, increasing the reach of the method tenfold. Even so, Hipparcos is only able to measure parallax angles for stars up to about 1,600 light-years away, a little more than one percent of the diameter of the Milky Way Galaxy. The European Space Agency's Gaia mission, due to launch in 2012 and come online in 2013, will be able to measure parallax angles to an accuracy of 10 microarcseconds, thus mapping nearby stars (and potentially planets) up to a distance of tens of thousands of light-years from earth.[9]

Computation

Stellar parallax motion

Distance measurement by parallax is a special case of the principle of triangulation, which states that one can solve for all the sides and angles in a network of triangles if, in addition to all the angles in the network, the length of at least one side has been measured. Thus, the careful measurement of the length of one baseline can fix the scale of an entire triangulation network. In parallax, the triangle is extremely long and narrow, and by measuring both its shortest side (the motion of the observer) and the small top angle (always less than 1 arcsecond,[5] leaving the other two close to 90 degrees), the length of the long sides (in practice considered to be equal) can be determined.

Assuming the angle is small (see derivation below), the distance to an object (measured in parsecs) is the reciprocal of the parallax (measured in arcseconds): d(pc) = 1 / p(arcsec). For example, the distance to Proxima Centauri is 1/0.7687=1.3009 parsecs (4.243 ly).[7]

Diurnal parallax

Diurnal parallax is a parallax that varies with rotation of the Earth or with difference of location on the Earth. The Moon and to a smaller extent the terrestrial planets or asteroids seen from different viewing positions on the Earth (at one given moment) can appear differently placed against the background of fixed stars.[10][11]

Lunar parallax

Lunar parallax (often short for lunar horizontal parallax or lunar equatorial horizontal parallax), is a special case of (diurnal) parallax: the Moon, being the nearest celestial body, has by far the largest maximum parallax of any celestial body, it can exceed 1 degree.[12]

The diagram (above) for stellar parallax can illustrate lunar parallax as well, if the diagram is taken to be scaled right down and slightly modified. Instead of 'near star', read 'Moon', and instead of taking the circle at the bottom of the diagram to represent the size of the Earth's orbit around the Sun, take it to be the size of the Earth's globe, and of a circle around the Earth's surface. Then, the lunar (horizontal) parallax amounts to the difference in angular position, relative to the background of distant stars, of the Moon as seen from two different viewing positions on the Earth:- one of the viewing positions is the place from which the Moon can be seen directly overhead at a given moment (that is, viewed along the vertical line in the diagram); and the other viewing position is a place from which the Moon can be seen on the horizon at the same moment (that is, viewed along one of the diagonal lines, from an Earth-surface position corresponding roughly to one of the blue dots on the modified diagram).

The lunar (horizontal) parallax can alternatively be defined as the angle subtended at the distance of the Moon by the radius of the Earth[13] -- equal to angle p in the diagram when scaled-down and modified as mentioned above.

The lunar horizontal parallax at any time depends on the linear distance of the Moon from the Earth. The Earth-Moon linear distance varies continuously as the Moon follows its perturbed and approximately elliptical orbit around the Earth. The range of the variation in linear distance is from about 56 to 63.7 earth-radii, corresponding to horizontal parallax of about a degree of arc, but ranging from about 61.4' to about 54'.[12] The Astronomical Almanac and similar publications tabulate the lunar horizontal parallax and/or the linear distance of the Moon from the Earth on a periodical e.g. daily basis for the convenience of astronomers (and formerly, of navigators), and the study of the way in which this coordinate varies with time forms part of lunar theory.

Diagram of daily lunar parallax

Parallax can also be used to determine the distance to the Moon.

One way to determine the lunar parallax from one location is by using a lunar eclipse. A full shadow of the Earth on the Moon has an apparent radius of curvature equal to the difference between the apparent radii of the Earth and the Sun as seen from the Moon. This radius can be seen to be equal to 0.75 degree, from which (with the solar apparent radius 0.25 degree) we get an Earth apparent radius of 1 degree. This yields for the Earth-Moon distance 60 Earth radii or 384,000 km. This procedure was first used by Aristarchus of Samos[14] and Hipparchus, and later found its way into the work of Ptolemy.[citation needed] The diagram at right shows how daily lunar parallax arises on the geocentric and geostatic planetary model in which the Earth is at the centre of the planetary system and does not rotate. It also illustrates the important point that parallax need not be caused by any motion of the observer, contrary to some definitions of parallax that say it is, but may arise purely from motion of the observed.

Another method is to take two pictures of the Moon at exactly the same time from two locations on Earth and compare the positions of the Moon relative to the stars. Using the orientation of the Earth, those two position measurements, and the distance between the two locations on the Earth, the distance to the Moon can be triangulated:

\mathrm{distance}_{\textrm{moon}} = \frac {\mathrm{distance}_{\mathrm{observerbase}}} {\tan (\mathrm{angle})}
Example of lunar parallax: Occultation of Pleiades by the Moon

This is the method referred to by Jules Verne in From the Earth to the Moon:

Until then, many people had no idea how one could calculate the distance separating the Moon from the Earth. The circumstance was exploited to teach them that this distance was obtained by measuring the parallax of the Moon. If the word parallax appeared to amaze them, they were told that it was the angle subtended by two straight lines running from both ends of the Earth's radius to the Moon. If they had doubts on the perfection of this method, they were immediately shown that not only did this mean distance amount to a whole two hundred thirty-four thousand three hundred and forty-seven miles (94,330 leagues), but also that the astronomers were not in error by more than seventy miles (≈ 30 leagues).

Solar parallax

After Copernicus proposed his heliocentric system, with the Earth in revolution around the Sun, it was possible to build a model of the whole solar system without scale. To ascertain the scale, it is necessary only to measure one distance within the solar system, e.g., the mean distance from the Earth to the Sun (now called an astronomical unit, or AU). When found by triangulation, this is referred to as the solar parallax, the difference in position of the Sun as seen from the Earth's centre and a point one Earth radius away, i. e., the angle subtended at the Sun by the Earth's mean radius. Knowing the solar parallax and the mean Earth radius allows one to calculate the AU, the first, small step on the long road of establishing the size and expansion age[15] of the visible Universe.

A primitive way to determine the distance to the Sun in terms of the distance to the Moon was already proposed by Aristarchus of Samos in his book On the Sizes and Distances of the Sun and Moon. He noted that the Sun, Moon, and Earth form a right triangle (right angle at the Moon) at the moment of first or last quarter moon. He then estimated that the Moon, Earth, Sun angle was 87°. Using correct geometry but inaccurate observational data, Aristarchus concluded that the Sun was slightly less than 20 times farther away than the Moon. The true value of this angle is close to 89° 50', and the Sun is actually about 390 times farther away.[14] He pointed out that the Moon and Sun have nearly equal apparent angular sizes and therefore their diameters must be in proportion to their distances from Earth. He thus concluded that the Sun was around 20 times larger than the Moon; this conclusion, although incorrect, follows logically from his incorrect data. It does suggest that the Sun is clearly larger than the Earth, which could be taken to support the heliocentric model.

Measuring Venus transit times to determine solar parallax

Although Aristarchus' results were incorrect due to observational errors, they were based on correct geometric principles of parallax, and became the basis for estimates of the size of the solar system for almost 2000 years, until the transit of Venus was correctly observed in 1761 and 1769.[14] This method was proposed by Edmond Halley in 1716, although he did not live to see the results. The use of Venus transits was less successful than had been hoped due to the black drop effect, but the resulting estimate, 153 million kilometers, is just 2% above the currently accepted value, 149.6 million kilometers.

Much later, the Solar System was 'scaled' using the parallax of asteroids, some of which, like Eros, pass much closer to Earth than Venus. In a favourable opposition, Eros can approach the Earth to within 22 million kilometres.[16] Both the opposition of 1901 and that of 1930/1931 were used for this purpose, the calculations of the latter determination being completed by Astronomer Royal Sir Harold Spencer Jones.[17]

Also radar reflections, both off Venus (1958) and off asteroids, like Icarus, have been used for solar parallax determination. Today, use of spacecraft telemetry links has solved this old problem. The currently accepted value of solar parallax is 8".794 143.[18]

Dynamic or moving-cluster parallax

The open stellar cluster Hyades in Taurus extends over such a large part of the sky, 20 degrees, that the proper motions as derived from astrometry appear to converge with some precision to a perspective point north of Orion. Combining the observed apparent (angular) proper motion in seconds of arc with the also observed true (absolute) receding motion as witnessed by the Doppler redshift of the stellar spectral lines, allows estimation of the distance to the cluster (151 light-years) and its member stars in much the same way as using annual parallax.[19]

Dynamic parallax has sometimes also been used to determine the distance to a supernova, when the optical wave front of the outburst is seen to propagate through the surrounding dust clouds at an apparent angular velocity, while its true propagation velocity is known to be the speed of light.[20]

Derivation

For a right triangle,

\sin p = \frac {1 AU} {d} ,

where p is the parallax, 1 AU (149,600,000 km) is approximately the average distance from the Sun to Earth, and d is the distance to the star. Using small-angle approximations (valid when the angle is small compared to 1 radian),

\sin x \approx x\textrm{\ radians} = x \cdot \frac {180} {\pi} \textrm{\ degrees} = x \cdot 180  \cdot \frac {3600} {\pi} \textrm{\ arcseconds} ,

so the parallax, measured in arcseconds, is

p'' \approx \frac {1 \textrm{\ AU}} {d} \cdot 180 \cdot \frac{3600} {\pi} .

If the parallax is 1", then the distance is

d = 1 \textrm{\ AU}  \cdot 180 \cdot \frac {3600} {\pi} \approx 206,265 \textrm{\ AU} \approx 3.2616 \textrm{\ ly} \equiv 1 \textrm{\ parsec} .

This defines the parsec, a convenient unit for measuring distance using parallax. Therefore, the distance, measured in parsecs, is simply d = 1 / p, when the parallax is given in arcseconds.[21]

Parallax error

Precise parallax measurements of distance have an associated error. However this error in the measured parallax angle does not translate directly into an error for the distance, except for relatively small errors. The reason for this is that an error toward a smaller angle results in a greater error in distance than an error toward a larger angle.

However, an approximation of the distance error can be computed by

\delta d = \delta \left( {1 \over p} \right) =\left| {\partial \over \partial p} \left( {1 \over p} \right) \right| \delta p ={\delta p \over p^2}

where d is the distance and p is the parallax. The approximation is far more accurate for parallax errors that are small relative to the parallax than for relatively large errors.

Parallax and measurement instruments

The thickness of a ruler can create parallax in fine measurements. This is avoided by taking measurements with the eye on a line directly perpendicular to the ruler so that the thickness of the ruler does not create error in positioning for fine measurements. A similar error occurs when reading the position of a pointer against a scale in an instrument such as a galvanometer (for example, in an analog-display multimeter.) To help the user avoid this problem, the scale is sometimes printed above a narrow strip of mirror, and the user positions his eye so that the pointer obscures its own reflection. This guarantees that the user's line of sight is perpendicular to the mirror and therefore to the scale. Similar error also happens when a cars speedometer speed reading appears different to car's passenger from what it does to the driver.

Photogrammetric parallax

Aerial picture pairs, when viewed through a stereo viewer, offer a pronounced stereo effect of landscape and buildings. High buildings appear to 'keel over' in the direction away from the centre of the photograph. Measurements of this parallax are used to deduce the height of the buildings, provided that flying height and baseline distances are known. This is a key component to the process of photogrammetry.

Parallax error in photography

Contax III rangefinder camera with macro photography setting. Because the viewfinder is on top of the lens and of the close proximity of the subject, goggles are fitted in front of the rangefinder and a dedicated viewfinder installed to compensate for parallax.

Parallax error can be seen when taking photos with many types of cameras, such as twin-lens reflex cameras and those including viewfinders (such as rangefinder cameras). In such cameras, the eye sees the subject through different optics (the viewfinder, or a second lens) than the one through which the photo is taken. As the viewfinder is often found above the lens of the camera, photos with parallax error are often slightly lower than intended, the classic example being the image of person with his or her head cropped off. This problem is addressed in single-lens reflex cameras, in which the viewfinder sees through the same lens through which the photo is taken (with the aid of a movable mirror), thus avoiding parallax error.

Parallax is also an issue in image stitching, such as for panoramas.

In computer graphics

In many early graphical applications, such as video games, the scene was constructed of independent layers that were scrolled at different speeds when the player/cursor moved. Some hardware had explicit support for such layers, such as the Super Nintendo Entertainment System. This gave some layers the appearance of being farther away than others and was useful for creating an illusion of depth, but only worked when the player was moving. Now, most games are based on much more comprehensive three-dimensional graphic models, although portable game systems (such as Nintendo DS) still often use parallax. Parallax-based graphics continue to be used for many online applications where the bandwidth required by three-dimensional graphics is excessive.

Parallax in sights

Parallax affects sights in many ways. On sights fitted to small arms, bows in archery, etc the distance between the sighting mechanism and the weapon's bore or axis can introduce significant errors when firing at close range, particularly when firing at small targets. This difference is generally referred to as "sight height"[22] and is compensated for (when needed) via calculations that also take in other variables such as bullet drop, windage, and the distance at which the target is expected to be.[23]

Parallax in optical sights

In optical sights parallax refers to the apparent movement of the reticle in relationship to the target when the user moves his/her head laterally behind the sight (up/down or left/right),[24] i.e. it is an error where the reticle does not stay aligned with the sight's own optical axis.

In optical instruments such as telescopes, microscopes, or in telescopic sights used on small arms and theodolites, the error occurs when the optics are not precisely focused: the reticle will appear to move with respect to the object focused on if one moves one's head sideways in front of the eyepiece. Some firearm telescopic sights are equipped with a parallax compensation mechanism which basically consists of a movable optical element that enables the optical system to project the picture of objects at varying distances and the reticle crosshairs pictures together in exactly the same optical plane. Telescopic sights may have no parallax compensation because they can perform very acceptably without refinement for parallax with the sight being permanently adjusted for the distance that best suits their intended usage. Typical standard factory parallax adjustment distances for hunting telescopic sights are 100 yd or 100 m to make them suited for hunting shots that rarely exceed 300 yd/m. Some target and military style telescopic sights without parallax compensation may be adjusted to be parallax free at ranges up to 300 yd/m to make them better suited for aiming at longer ranges.[citation needed] Scopes for rimfires, shotguns, and muzzleloaders will have shorter parallax settings, commonly 50 yd/m[citation needed] for rimfire scopes and 100 yd/m[citation needed] for shotguns and muzzleloaders. Scopes for airguns are very often found with adjustable parallax, usually in the form of an adjustable objective, or AO. These may adjust down as far as 3 yards (2.74 m).[citation needed]

Non-magnifying reflector or "reflex" sights have the ability to be theoretically "parallax free". But since these sights use parallel collimated light this is only true when the target is at infinity. At finite distances eye movement perpendicular to the device will cause parallax movement in the reticle image in exact relationship to eye position in the cylindrical column of light created by the collimating optics.[25][26] Firearm sights, such as some red dot sights, try to correct for this via not focusing the reticle at infinity, but instead at some finite distance, a designed target range where the reticle will show very little movement due to parallax.[25] Some manufactures market reflector sight models they call "parallax free",[27] but this refers to an optical system that compensates for off axis spherical aberration, an error that can cause the reticle position to diverge off the sight's optical axis with change in eye position.[28][29]

Artillery gunfire

Because of the positioning of field or naval artillery guns, each one has a slightly different perspective of the target relative to the location of the fire-control system itself. Therefore, when aiming its guns at the target, the fire control system must compensate for parallax in order to assure that fire from each gun converges on the target.

Parallax rangefinders

Parallax theory for finding naval distances

A coincidence rangefinder or parallax rangefinder can be used to find distance to a target.

As a metaphor

In a philosophic/geometric sense: An apparent change in the direction of an object, caused by a change in observational position that provides a new line of sight. The apparent displacement, or difference of position, of an object, as seen from two different stations, or points of view. In contemporary writing parallax can also be the same story, or a similar story from approximately the same time line, from one book told from a different perspective in another book. The word and concept feature prominently in James Joyce's 1922 novel, Ulysses. Orson Scott Card also used the term when referring to Ender's Shadow as compared to Ender's Game. The artist Sarah Morris named her studio Parallax, in reference to her parallel production of paintings and films.

The metaphor is invoked by Slovenian philosopher Slavoj Žižek in his work The Parallax View. Žižek borrowed the concept of "parallax view" from the Japanese philosopher and literary critic Kojin Karatani. "The philosophical twist to be added (to parallax), of course, is that the observed distance is not simply subjective, since the same object that exists 'out there' is seen from two different stances, or points of view. It is rather that, as Hegel would have put it, subject and object are inherently mediated so that an 'epistemological' shift in the subject's point of view always reflects an ontological shift in the object itself. Or—to put it in Lacanese—the subject's gaze is always-already inscribed into the perceived object itself, in the guise of its 'blind spot,' that which is 'in the object more than object itself', the point from which the object itself returns the gaze. Sure the picture is in my eye, but I am also in the picture."[30]

Notes

  1. ^ Shorter Oxford English Dictionary. 1968. "Mutual inclination of two lines meeting in an angle" 
  2. ^ "Parallax". Oxford English Dictionary (Second Edition ed.). 1989. http://dictionary.oed.com/cgi/entry/50171114?single=1&query_type=word&queryword=parallax&first=1&max_to_show=10. "Astron. Apparent displacement, or difference in the apparent position, of an object, caused by actual change (or difference) of position of the point of observation; spec. the angular amount of such displacement or difference of position, being the angle contained between the two straight lines drawn to the object from the two different points of view, and constituting a measure of the distance of the object." 
  3. ^ Steinman, Scott B.; Garzia, Ralph Philip (2000). Foundations of Binocular Vision: A Clinical perspective. McGraw-Hill Professional. pp. 2–5. ISBN 0-8385-2670-5 
  4. ^ Steinman & Garzia 2000, p. 180.
  5. ^ a b Zeilik & Gregory 1998, p. 44.
  6. ^ Zeilik & Gregory 1998, § 22-3.
  7. ^ a b Benedict, G. Fritz et al. (1999). "Interferometric Astrometry of Proxima Centauri and Barnard's Star Using HUBBLE SPACE TELESCOPE Fine Guidance Sensor 3: Detection Limits for Substellar Companions". The Astronomical Journal 118 (2): 1086–1100. arXiv:astro-ph/9905318. Bibcode 1999astro.ph..5318B. doi:10.1086/300975. 
  8. ^ See p.51 in The reception of Copernicus' heliocentric theory: proceedings of a symposium organized by the Nicolas Copernicus Committee of the International Union of the History and Philosophy of Science, Torun, Poland, 1973, ed. Jerzy Dobrzycki, International Union of the History and Philosophy of Science. Nicolas Copernicus Committee; ISBN 90-277-0311-6, ISBN 978-90-277-0311-8
  9. ^ Henney, Paul J.. "ESA's Gaia Mission to study stars". Astronomy Today. http://www.astronomytoday.com/exploration/gaia.html. Retrieved 2008-03-08. 
  10. ^ Seidelmann, P. Kenneth (2005). Explanatory Supplement to the Astronomical Almanac. University Science Books. pp. 123–125. ISBN 1891389459. 
  11. ^ Barbieri, Cesare (2007). Fundamentals of astronomy. CRC Press. pp. 132–135. ISBN 0750308869. 
  12. ^ a b Astronomical Almanac e.g. for 1981, section D
  13. ^ Astronomical Almanac, e.g. for 1981: see Glossary; for formulae see Explanatory Supplement to the Astronomical Almanac, 1992, p.400
  14. ^ a b c Gutzwiller, Martin C. (1998). "Moon-Earth-Sun: The oldest three-body problem". Reviews of Modern Physics 70 (2): 589. Bibcode 1998RvMP...70..589G. doi:10.1103/RevModPhys.70.589. 
  15. ^ Freedman, W.L. (2000). "The Hubble constant and the expansion age of the Universe". Physics Reports 333 (1): 13. arXiv:astro-ph/9909076. Bibcode 2000PhR...333...13F. doi:10.1016/S0370-1573(00)00013-2. 
  16. ^ Whipple 2007, p. 47.
  17. ^ Whipple 2007, p. 117.
  18. ^ US Naval Observatory, Astronomical Constants
  19. ^ Vijay K. Narayanan; Andrew Gould (1999). "A Precision Test of Hipparcos Systematics toward the Hyades". The Astrophysical Journal 515 (1): 256. arXiv:astro-ph/9808284. Bibcode 1999ApJ...515..256N. doi:10.1086/307021. 
  20. ^ Panagia, N.; Gilmozzi, R.; MacChetto, F.; Adorf, H.-M.; Kirshner, R. P. (1991). "Properties of the SN 1987A circumstellar ring and the distance to the Large Magellanic Cloud". The Astrophysical Journal 380: L23. Bibcode 1991ApJ...380L..23P. doi:10.1086/186164. 
  21. ^ Similar derivations are in most astronomy textbooks. See, e. g., Zeilik & Gregory 1998, § 11-1.
  22. ^ Dexadine, Ballistic Explorer, Sight Height
  23. ^ crossbowmen.com, Crossbow Arrow & Bolts, Trajectories
  24. ^ Setting Up An Air Rifle And Telescopic Sight For Field Target - An Instruction Manual For Beginners, page 16
  25. ^ a b Encyclopedia of Bullseye Pistol
  26. ^ American rifleman: Volume 93, National Rifle Association of America - THE REFLECTOR SIGHT By JOHN B. BUTLER, page 31
  27. ^ Aimpoint's parallax-free, double lens system... AFMO.com
  28. ^ ar15.com, How Aimpoints, EOTechs, And Other Parallax-Free Optics Work
  29. ^ Gunsight - Patent 5901452 - general description of a mangin mirror system
  30. ^ Žižek, Slavoj (2006). The Parallax View. The MIT Press. pp. 17. ISBN 0262240513. 

See also

References

  • Hirshfeld, Alan w. (2001). Parallax: The Race to Measure the Cosmos. New York: W. H. Freeman. ISBN 0716737116 
  • Whipple, Fred L. (2007). Earth Moon and Planets. Read Books. ISBN 1406764132 .
  • Zeilik, Michael A.; Gregory, Stephan A. (1998). Introductory Astronomy & Astrophysics (4th ed.). Saunders College Publishing. ISBN 0030062284 .

External links


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Parallax — Saltar a navegación, búsqueda Para el término técnico, véase paralaje. Parallax Publicación DC Comics Primera aparición Green Lantern (vol. 3) Nº 50 Características Nombre real Hal Jordan Parallax es un vill …   Wikipedia Español

  • Parallax — Par al*lax, n. [Gr. ? alternation, the mutual inclination of two lines forming an angle, fr. ? to change a little, go aside, deviate; para beside, beyond + ? to change: cf. F. parallaxe. Cf. {Parallel}.] 1. The apparent displacement, or… …   The Collaborative International Dictionary of English

  • parallax — [par′ə laks΄] n. [Fr parallaxe < Gr parallaxis < parallassein, to vary, decline, wander < para ,PARA 1 + allassein, to change < allos, other: see ELSE] 1. the apparent change in the position of an object resulting from the change in… …   English World dictionary

  • Parallax — (Hal Jordan) es un superhéroe del Universo DC. Debuto en el número 50 de la revista Green Lantern. Parallax es la encarnacion de Hal Jordan tras los tragicos eventos de Crespusculo Esmeralda saga en la que es destruida Ciudad Costera así como… …   Enciclopedia Universal

  • parallax — (n.) 1570s, from M.Fr. parallaxe (mid 16c.), from Gk. parallaxis change, alteration, inclination of two lines meeting at an angle, from parallassein to alter, make things alternate, from para (see PARA (Cf. para )) + allassein to change, from… …   Etymology dictionary

  • parallax — ► NOUN 1) the apparent difference in the position of an object when viewed from different positions, e.g. through the viewfinder and the lens of a camera. 2) Astronomy the angular difference in the apparent positions of a star observed from… …   English terms dictionary

  • parallax — parallactic /par euh lak tik/, adj. parallactically, adv. /par euh laks /, n. 1. the apparent displacement of an observed object due to a change in the position of the observer. 2. Astron. the apparent angular displacement of a celestial body due …   Universalium

  • Parallax SX — The Parallax SX line of microcontrollers were formerly made by Ubicom. The SX dies are still manufactured by Ubicom, who sends them to Parallax for packaging. Ubicom used to make SX processor with 18, 20, 28, 48 and 52 pins, but because Parallax… …   Wikipedia

  • parallax — i. As it relates to photo interpretation, the apparent displacement of the position of a body with respect to a reference point or system caused by a shift in the point of observation. In the illustration, A will see the black post to the right… …   Aviation dictionary

  • parallax — /ˈpærəlæks / (say paruhlaks) noun 1. a misalignment in the comparison of two locations due to the relative position of the observer. 2. diurnal parallax or geocentric parallax, the apparent displacement of a heavenly body due to its being… …  

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”