Daniel Gooch standard gauge locomotives

Daniel Gooch standard gauge locomotives

The Daniel Gooch standard gauge locomotives comprise several classes of locomotives designed by Daniel Gooch, Superintendent of Locomotive Engines for the Great Western Railway (GWR) from 1837 to 1864.

Contents

History

In 1854 the GWR absorbed two standard gauge lines, the Shrewsbury and Chester Railway and the Shrewsbury and Birmingham Railway to become the GWR's Northern Division. Consequently from then until his retirement in 1864, Daniel Gooch (the company's Superintendent of Locomotive Engines, a post he had occupied since 1837), although a passionate advocate of the GWR's original broad gauge, of necessity also became responsible for designing standard gauge locomotives for the new Northern Division. From 1858 the construction of standard gauge engines started at the newly enlarged Northern Division Works at Stafford Road, Wolverhampton; these were designed by Joseph Armstrong, the Wolverhampton Locomotive Superintendent that the GWR had inherited along with the S&BR.

Alongside these Armstrong locomotives, several other standard gauge locomotive classes were built during these years under the aegis of Gooch himself, either at the Great Western's principal works at Swindon, or else by outside firms, Swindon and Wolverhampton between them not yet having sufficient capacity for all the necessary new construction. Though these engines were mostly designed by Gooch himself, sometimes the influence of Joseph Armstrong may be evident.

Classes

The classes concerned are as follows:

  • 57 Class: Nos. 57-68, 12 0-6-0 freight engines designed by Gooch built at Swindon in 1855-6. They were typical Gooch engines, resembling his broad gauge Standard Goods, suitably narrowed for the standard gauge. On delivery they had to be transported to Wolverhampton on specially constructed broad gauge wagons. Between 1873 and 1890 all were "renewed" at Wolverhampton - that is, built afresh with minimal use of parts from the original engines - and in 1890-91 William Dean added, for some reason, three more to the class, as Nos. 316-8. With a few exceptions the class remained in the Northern Division, and the last was withdrawn in 1927.[1] Nos. 60 and 67 ran between 1876/7 and 1886 as saddle tank engines, having been renewed in that form by George Armstrong.[2]
  • 69 Class: Nos. 69-76, eight Gooch 2-2-2s for the Wolverhampton-Shrewsbury line, built 1855-6 by Beyer, Peacock & Co. in Manchester. Four of these engines were the very first to be built by Beyer, Peacock, at their brand-new Gorton Works. In 1861, when standard gauge trains started to run through on the mixed gauge to Paddington, the engines moved south to work on the London-Oxford-Wolverhampton sections. After about 20 years the locomotives were "renewed" by George Armstrong at Wolverhampton, i.e. replaced by what were "from an engineering viewpoint new engines." Then in 1895-7, under William Dean at Swindon, they were reconstructed once more, emerging as 2-4-0s of the "River" Class.[3][4]
  • 77 and 167 classes: Nos. 77, 78 and 167-170, seven 0-6-0s built in 1857 and 1861 with boilers to Gooch's design but otherwise designed by the builders, Beyer, Peacock & Co..[5][6]
  • 79 Class: Nos.79-90 and 119-130, 24 0-6-0 freight engines designed by Gooch and built at Swindon in 1857 (79-90) and 1861-2. Very similar to the 57 class but with smaller driving wheels, they hauled the important coal traffic between Pontypool Road and Birkenhead (carrying fuel for the Atlantic liners, which burned Welsh steam coal). 13 of them were renewed under William Dean at Swindon, and they were withdrawn between 1905 and 1918.[7] The other 11 were rebuilt by George Armstrong as saddle tank locomotives, becoming the 119 class.
  • 91 Class: Nos. 91 and 92, two 0-4-0 saddle tanks supplied in 1857 by Beyer, Peacock & Co., to their own design, for shunting at the collieries around Wrexham. Though No.91 was withdrawn in 1877, its sister had a very long life, surviving until 1942, having spent its last three years as a stationary boiler at Wellington.[8]
  • 93 Class: Nos 93 and 94, built 1860 at Swindon. These were the GWR's first 0-6-0 tank locomotives. In 1875 and 1877 they were completely renewed at Wolverhampton to become members of the 1901 Class; just before this they are known to have been at Chester and Wolverhampton respectively.[9]
  • 131 Class: 28 0-6-0s designed by Gooch: Nos. 131-6, built 1862 at Swindon; 137-148, built 1862 by Slaughter, Grüning & Co. of Bristol; and 310-19 built 1864-5 at Swindon. These locomotives used Stephenson, not Gooch valve gear, for the first time at Swindon; this may have been at Armstrong's suggestion. They were later renewed at Wolverhampton.[10][11]
  • "Sharps" or 157 Class: Nos. 157-166, ten 2-2-2s built in 1862 "to Gooch's specifications" by Sharp, Stewart and Company, and closely resembling the 69 Class. In 1879 Nos. 157, 161 and 163 were renumbered 172, 173 and 174 respectively, while the others were "renewed" in 1878-9, that is, withdrawn and replaced by ten officially new engines, William Dean's 157 Class. In their original form, the "Sharps" worked mainly on the Paddington-Wolverhampton expresses.[12]
  • "England" or "Chancellor" Class: Nos.149-156, eight 2-4-0s built in 1862 "to GWR drawings" by George England & Co. at the Hatcham Ironworks, New Cross, Surrey. They were stationed at Wolverhampton for expresses to the north, and were renewed in 1878-1883, also at Wolverhampton.[13][11]
  • 320 Class: Nos. 320 and 321, two 2-4-0 well tanks built at Swindon in 1864 for working on the underground Metropolitan Railway in London. They were the first standard gauge engines anywhere to have condensers, though the system was not a success. Within ten years both were converted to tender engines, and they were withdrawn in 1881.[14]
  • 322 or "Beyer" Class: 30 0-6-0s built by Beyer, Peacock & Co. of Manchester. The first 20, Nos. 322-41, were ordered by Gooch and built in 1864; ten more, Nos. 350-59 followed in 1866, having been ordered by Armstrong. The latter were the last 19th-century GWR locomotives to be built by an outside contractor. Like the 79 Class, they were initially used between Pontypool Road and Birkenhead. Between 1878 and 1885 six were rebuilt at Wolverhampton as saddle tank engines. The rest were withdrawn between 1912 and 1934, and quite exceptionally three of the class, Nos. 354, 355 and 388, achieved mileages of over 1,500,000.[15]

Notes

  1. ^ Tabor 1956, pp. D44-D47.
  2. ^ le Fleming 1958, p. E30.
  3. ^ Tabor 1956, pp. D6-D7.
  4. ^ Holcroft 1953, pp. 42-3, 47.
  5. ^ Tabor 1956, p. D49.
  6. ^ Holcroft 1953, p. 43.
  7. ^ Tabor 1956, pp. D47-D48.
  8. ^ Tabor 1959, pp. F5-F6.
  9. ^ le Fleming 1958, p. E12.
  10. ^ Tabor 1956, pp. D50-D52.
  11. ^ a b Holcroft 1953, p. 49.
  12. ^ Tabor 1956, p. D9.
  13. ^ Tabor 1956, pp. D20-D21.
  14. ^ Tabor 1959, pp. F26-F27.
  15. ^ Tabor 1956, pp. D52-D55.

Sources

  • Holcroft, Harold (1953). The Armstrongs of the Great Western. London: Railway World. 
  • Tabor, F. J. (February 1956). White, D. E.. ed. The Locomotives of the Great Western Railway, part four: Six-wheeled Tender Engines. Kenilworth: RCTS. 
  • le Fleming, H. M. (April 1958). White, D. E.. ed. The Locomotives of the Great Western Railway, part five: Six-coupled Tank Engines. RCTS. 
  • Tabor, F. J. (August 1959). White, D. E.. ed. The Locomotives of the Great Western Railway, part six: Four-coupled Tank Engines. RCTS. 

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Daniel Gooch — For other people named Daniel Gooch, see Daniel Gooch (disambiguation). Daniel Gooch Sir Daniel Gooch by Leslie Ward, 1882 Born 24 August 1816(1816 08 24) Be …   Wikipedia

  • Locomotives of the Great Western Railway — The Great Western Railway had an uninterrupted life of over a century to develop its locomotive designs as it was barely affected by the Grouping of 1923. As a result its locomotive history is a long and interesting one. BackgroundNumbering and… …   Wikipedia

  • Bristol and Exeter Railway 0-6-0 locomotives — The Bristol and Exeter Railway 0 6 0 locomotives include three different types of broad gauge and standard gauge 0 6 0 steam locomotives designed for working freight trains. On 1 January 1876 the Bristol and Exeter Railway was amalgamated with… …   Wikipedia

  • List of broad gauge (7 feet) railway locomotive names — This is a list of the names of broad gauge railway locomotives built in the United Kingdom during the heyday of that gauge (which ended in that country by 1892 with the final triumph of standard gauge). Throughout the history of railways many… …   Wikipedia

  • Great Western Railway — The Great Western Railway (GWR) was a British railway company and a notable example of civil engineering, linking London with the West Country, South West England and South Wales. It was founded in 1833, kept its identity through the 1923… …   Wikipedia

  • Swindon Works — Swindon railway works were built by the Great Western Railway in 1841 in Swindon in the English county of Wiltshire.HistoryIn 1835 Parliament approved the construction of a railway between London and Bristol. Its Chief Engineer was Isambard… …   Wikipedia

  • Thomas Russell Crampton — Thomas Russell Crampton, M.I.C.E., M.I.Mech.E., (1816 1888) was an English engineer born at Broadstairs, Kent, and trained on Brunel s Great Western Railway.He is best known for designing the Crampton locomotive but had many engineering interests …   Wikipedia

  • Metropolitan Railway — This article is about the history of what became the Metropolitan line and Hammersmith City Line. For the history of what became the District line, see Metropolitan District Railway. Construction of the Metropolitan Railway close to King s Cross… …   Wikipedia

  • Metropolitan and Metropolitan District Railways — The Metropolitan Railway (MetR) and the Metropolitan District Railway (District) were the first two underground railways to be built in London, creating the world s first metro system. Although separate and independent companies and often fierce… …   Wikipedia

  • GWR Star Class — This is about the broad gauge locomotives for the later standard gauge 4 6 0s see GWR 4000 Class North Star replica (built in 1923 using some parts of the original) on display at Swindon, England, 2008 The Great Western Railway (GWR) Star Class… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”