- Rhymney Railway
The Rhymney Railway was virtually a single stretch of main line, some fifty miles in length, by which the
Rhymney Valley was connected to the docks atCardiff in the county ofGlamorgan ,South Wales pre-Grouping Atlas] .History
The aim of the railway was to gain access to the large
iron works and collieries at the extreme north of the Valley. Short extensions, connecting with other railways, gave the Rhymney routes to take its (largely mineral) traffic to theMidlands and the North of England, or opened up connections to collieries and iron works. Some of those routes were worked jointly with other companies, particularly theLondon and North Western Railway (LNWR).Growth of the railway
The original incorporation was in 1854, and the railway was opened in various sections as follows:
*Rhymney toHengoed , January 1858
*Hengoed - Walnut Tree Junction, February 1858
*line into Cardiff 1864
*Rhymney -Nantybwch , giving access to the LNWR. This section was worked jointly by the two companies April 1871
*Ystrad Mynach - Penallta Junction, giving access to theGreat Western Railway and theAberdare Valley, April 1871
*Taff -Bargoed giving access to theDowlais Iron Works. Nine miles in length, with a gradient of 1:40, it had heavy usage. In 1911 the Rhymney conveyed over 300,000 tons of iron and iron ore per annum over this route. Opened January 1 1876
*Quaker's Yard - Cyfarthfa, authorised 1882
*Aber branch, 1890
*Ystrad Mynach - Cylla Valley, 1895The Rhymney owned 120 locomotives in 1911. By then the total mileage of the Rhymney was over 61 miles; a further 16 miles of 'foreign' track was also worked over. Over two million tons of freight had been carried.
:"Details above taken from The Railway Year Book 1912 (The Railway Publishing Company Ltd)"
The first workshops for the railway were in
Cardiff , opening in1857 but, as their work increased, there was insufficient room for expansion, andCaerphilly railway works was opened in1899 .Merging
Although the Rhymney was nominally independent until absorption in the
Great Western Railway at the Grouping of 1923, the same managing director, in 1917, took over control of the line and theTaff Vale Railway and theCardiff Railway , making them to all and intents and purposes one undertaking.The route
The stations of the line from Cardiff to Rhymney were as follows:-
Main Line
* Cardiff Queen Street
*Heath High Level
* Llanishen
* Cefn On Halt (now replaced by nearbyLisvane and Thornhill railway station )
** here is the "Caerphilly tunnel" 1.1 mile (1.76km) in length
* Caerphilly
* Aber
* Llanbradach
* Ystrad Mynach
* Hengoed
* Pengam
* Gilfach Fargoed
* Bargoed
* Brithdir
* Tirphil (New Tredegar)
* Pontlottyn
* Rhymney
* Rhymney Bridge (joint station with LNWR)
* Nantybwch (also joint station with LNWR)Branch lines
From south to north these were:
* Caerphilly - Taffs Well connecting with theTaff Vale Railway Openeed 1858
* "Senghenydd branch": with intermediate stations serving:
**Penyrheol
**Abertridwr
* From Ystrad Mynach a spur connected with the GWR; from Treharris on that line there was a Rhymney Railway line direct toMerthyr Tydfil over the "Taff-Bargoed Joint Line" undertaking
* "Deri branch" connecting at Deri Junction with theBrecon and Merthyr Railway All of those branches have since been closed.
Officers
Cornelius Lundie , from the outset of the line and for more than 40 years, was General Manager, Traffic Manager and Superintendent of the line. Upon his demise, the Rhymney did a spring cleaning, which notably included the scrapping of his favourite engine, which he had been preserving for a number of years.C. T. Hurry Riches (son of Tom Hurry Riches of the
Taff Vale Railway ) wasLocomotive Superintendent from January 1906 [ [http://www.steamindex.com/people/riches.htm Tom Hurry Riches ] ] . One Locomotive Superintendent had an unfortunately short career with the Rhymney, which was cut short when he visited theBrecon and Merthyr Railway to examine a new engine of theirs. It overturned, killing him and his B&MR counterpart.Locomotives
:"Main article:
Locomotives of the Great Western Railway Early locomotives
The early locomotives were tender engines, whether for passenger or goods:
*0-6-0 Vulcan Foundry 1857 : inside frames; freight
*2-4-0 Vulcan Foundry1858 ,1861 : passenger locomotives
*0-6-0 Kitson 1859 -1868 : double frames, outside cranks; freight
*0-6-0 ST1872 onwards: various builders. All Rhymney locomotives from then were of this type.
**Notes taken from "The Railway Magazine" February 1923Later locomotives
*
Rhymney Railway A class 0-6-2 T
*Rhymney Railway M class 0-6-2T
*Rhymney Railway P class 0-6-2T
*Rhymney Railway R class 0-6-2TToday
The "main" line is now largely in use as the
Rhymney Line . Evening trains traditionally stop closer and closer to Cardiff as the night wears on. For example, the last trains typically only go as far as Ystrad Mynach station.References
ources
* No Author, (1980). "British Railways Pre-Grouping Atlas and Gazetteer". Shepperton: Ian Allan Ltd.
External links
* [http://www.railscot.co.uk/Rhymney_Railway/frame.htm The Rhymney Railway: including map, dates of opening]
Wikimedia Foundation. 2010.