Dodge Omni

Dodge Omni

Manufacturer	Chrysler Corporation
Also called	Plymouth Horizon
Production	1978–1990
Assembly	United States: Belvidere, Illinois (1978–1990) Kenosha, Wisconsin (1988)
Successor	Dodge Shadow Plymouth Sundance
Class	Subcompact
Body style	5-door hatchback
Layout	FF layout
Platform	L-body
Engine	1.6 L Peugeot/Simca I4 1.7 L Volkswagen I4 2.2 L K I4 2.2 L Turbo I I4
Transmission	4-speed Volkswagen manual 5-speed manual 3-speed A404 automatic 3-speed A413 automatic
Wheelbase	99.1 in (2,517 mm)
Length	163.2 in (4,145 mm)
Width	66.8 in (1,697 mm)
Height	53.0 in (1,346 mm)
Related	Chrysler Horizon Dodge Charger Dodge Omni 024 Dodge Rampage Plymouth Horizon TC3 Plymouth Scamp Plymouth Turismo Shelby GLHS

The Dodge Omni and the similar Plymouth Horizon were front wheel drive cars introduced by the Dodge and Plymouth divisions of the Chrysler Corporation in North America in 1978, and were based on a European Simca-based design of the same name. While they are generally not credited, they were the first of many successful front-wheel drive models, such as the Dodge Aries/Plymouth Reliant and the Dodge Caravan/Plymouth Voyager which helped return Chrysler to profitability.

History

The Dodge Omni and the similar Plymouth Horizon were front-wheel drive cars introduced by the Dodge and Plymouth divisions of the Chrysler Corporation in North America in 1978. The car came off the line priced at $2,500. It was a three or five-door hatchback. Although the car had substantial European origins (the car was actually developed by Simca, the French division of Chrysler Europe, before that company was sold to Peugeot, which released the car as the Talbot Horizon), it was presented as a very significant domestic development, since it was assembled by Chrysler, who retained North American rights to the car. Both the Omni and the Horizon were based on Chrysler's then-new L platform. The company had avoided building a car for the subcompact market up until that time, preferring to use captive imports like the Dodge Colt instead. The Omni and Horizon were the first front-wheel drive cars in the Dodge and Plymouth lineup, the first front-wheel drive transverse engine production car in the North American market, and among the first American built front-wheel drive cars to sell in large numbers. Previous front-wheel drive American cars such as the Cord 810, Cadillac Eldorado and Oldsmobile Toronado were low volume luxury cars.

Plymouth Horizon 5-door

The Horizon and its corporate twin the Omni appeared at a critical time, when Chrysler was desperately looking for government support to survive. In 1978, Chrysler had beaten both Ford and GM to the market with a domestically-produced front-wheel drive car to challenge the VW Rabbit. News reports indicated that these fresh small cars, which did indeed begin to sell well, helped persuade Congress and the White House that Chrysler had a future worth saving. The Omni was Motor Trend magazine's Car of the Year for 1978.

Despite looking almost identical, the Omni and Horizon had few interchangeable parts with their European siblings. Aside from the heavier-looking American body panels and bumpers, the OHV Simca engines were replaced with a 1.7 L OHC engine sourced from Volkswagen, while MacPherson strut front suspension took the place of the torsion bar arrangement found in the European Horizon. The small Volkswagen engine used an enlarged Chrysler-designed cylinder head and intake manifold and produced 75 hp (56 kW) and 90 lb·ft (120 N·m).

Early on, the cars had a shaky period after Consumer Reports magazine tested one and reported that it easily went out of control in hard maneuvering. This allegation received extensive mainstream coverage, including a heading in Time Magazine: Storm over the Horizon. Other auto magazines reported no problems and opined that the test did not approximate real-world driving conditions. The car was modified to include a steering damper and lighter weight steering wheel, and went on to success.

The HVAC controls were mounted to the left of the steering wheel rather than in the center stack like in most vehicles. This meant that only the driver could adjust the interior temperature. It was a quirk not only found in the Omni and Horizon, though; many other Chrysler Corporation products (including the Dodge Charger and Chrysler Cordoba) and vehicles from other manufacturers (including Ford) came with instrument panels that placed the HVAC controls in this general location during the 1970s.

Chrysler's 2.2 L K-car engine appeared in 1981 as an upmarket option to the small Volkswagen engine. It produced 84 hp (63 kW) at first, rising to 93 hp (69 kW) and finally 96 hp (72 kW) by the end of production. The Volkswagen 1.7 was replaced by a Simca/Peugeot-produced 1.6 L I4 unit in 1983. This engine produced 62 hp (46 kW) and 86 lb·ft (117 N·m), and was only available with a manual transmission. The 2.2 L Chrysler was the only engine from 1987 onwards.

The Omni and the Horizon finally ended production in 1990, and were replaced by the Dodge Shadow/Plymouth Sundance, which had both been introduced in 1987. It outlived the European version by three years; Peugeot had bought Chrysler's European division in 1978 and re-badged the Horizon (along with the rest of the British Chrysler and French Simca range) as a Talbot, with production lasting until 1987.^[1]

Chrysler invested in a number of significant changes that ended up being used for only one year; the cars gained larger exterior rear-view mirrors (borrowed from the departed M-body sedans), a driver's side air bag and a mildly redesigned instrument panel, complete with HVAC controls finally moved to the center. As production was being wound up all tooling needed to produce the vehicle was sold to the Tata Group in India, and the car was produced there for several more years.

PRODUCTION NUMBERS Year Omni 1978 81,611> 1979 141,477> 1980 138,155> 1981 77,039 1982 71,864 1983 42,554 1984 71,355 1985 74,127 1986 73,580 1987 66,907 1988 59,867 1989 46,239 1990 16,733

Variants

Several variants of the platform appeared later, including a 3-door hatchback known as the Dodge 024/Plymouth TC3 and briefly a small car-like truck under the Dodge Rampage/Plymouth Scamp name.

The 024 and TC3 were marketed as sporty cars, although a modest 94 hp (70 kW) four-cylinder engine, decent aerodynamics and light weight didn't make them very formidable. The TC3 was renamed the Plymouth Turismo, and the 024 the Dodge Charger in 1983. The last 1,000 Dodge Chargers were modified by Carroll Shelby into Shelby GLHSs.

GLH

1986 Shelby GLHS

The ultimate Dodge Omni was the Carroll Shelby-modified Omni GLH. The original name, "Coyote", was rejected, and Shelby's choice, the initials GLH, which stood for "Goes Like Hell", were taken instead.^[2] 1984 was the first year of the GLH, which carried over most of the modifications that had been made the previous year to the Shelby Charger. 1985 was the debut of the real GLH model with the turbocharged engine option. This engine, at low boost (10 psi) coupled with the car's very low weight (as low as 2,200 lb (1,000 kg)), earned this car its name. The car carried over into 1986 unchanged aside from the addition of a hatch-mounted third tail light, and production was stopped. The final 500 GLH cars were sold to Shelby, who used them as the basis for the 1986 Shelby GLHS ("Goes Like Hell Sm'more"). These cars were modified by Carroll and sold as Shelbys.

Notes

1. ^ [1]
2. ^ Griffey, Evan (2007). "Cool Cars We Miss". MSN. http://editorial.autos.msn.com/article.aspx?cp-documentid=434398&topart=sports. Retrieved 2007-12-11. 

External links

• Allpar's Omni/Horizon page
• Plymouth Horizon-o-Rama
• Canadian Driver
• Front-Runners.net Road Test (PDF)