Area rule

Area rule

The Whitcomb area rule, also called the transonic area rule, is a design technique used to reduce an aircraft's drag at transonic and supersonic speeds, particularly between Mach 0.75 and 1.2.

This is one of the most important operating speed ranges for commercial and military fixed-wing aircraft today, with transonic acceleration being considered an important performance metric for combat aircraft, necessarily dependent upon transonic drag.



The Sears-Haack body shape

At high-subsonic flight speeds, supersonic airflow can develop in areas where the flow accelerates around the aircraft body and wings. The speed at which this occurs varies from aircraft to aircraft, and is known as the critical Mach number. The resulting shock waves formed at these points of supersonic flow can bleed away a considerable amount of power, which is experienced by the aircraft as a sudden and very powerful form of drag, called wave drag. To reduce the number and power of these shock waves, an aerodynamic shape should change in cross sectional area as smoothly as possible. This leads to a "perfect" aerodynamic shape known as the Sears-Haack body, roughly shaped like a cigar but pointed at both ends.

The area rule says that an airplane designed with the same cross-sectional area distribution in the longitudinal direction as the Sears-Haack body generates the same wave drag as this body, largely independent of the actual shape. As a result, aircraft have to be carefully arranged so that large volumes like wings are positioned at the widest area of the equivalent Sears-Haack body, and that the cockpit, tailplane, intakes and other "bumps" are spread out along the fuselage and/or that the rest of the fuselage along these "bumps" is correspondingly thinned.

The area rule also holds true at speeds higher than the speed of sound, but in this case the body arrangement is in respect to the Mach line for the design speed. For instance, at Mach 1.3 the angle of the Mach cone formed off the body of the aircraft will be at about μ = arcsin (1/M) = 50.3 deg (μ is the angle of the Mach cone, or simply Mach angle). In this case the "perfect shape" is biased rearward, which is why aircraft designed for high speed cruise tend to be arranged with the wings at the rear.[1] A classic example of such a design is Concorde. When applying the supersonic area rule, the condition that the plane defining the cross-section meet the longitudinal axis at the Mach angle μ no longer prescribes a unique plane for μ other than the 90 degrees given by M=1. The correct procedure is to average over all possible orientations of the intersecting plane.



Junkers patent drawing from March 1944.

The area rule was discovered by Otto Frenzl when comparing a swept wing with a w-wing with extreme high wave drag [2] working on a transonic wind tunnel at Junkers works in Germany between 1943 and 1945. He wrote a description on 17 December 1943, with the title “Arrangement of Displacement Bodies in High-Speed Flight”; this was used in a patent filed in 1944.[3] The results of this research were presented to a wide circle in March 1944 by Theodor Zobel at the “Deutsche Akademie der Luftfahrtforschung” (German Academy of Aeronautics Research) in the lecture “Fundamentally new ways to increase performance of high speed aircraft.” [4]

Subsequent German wartime aircraft design took account of the discovery, evident in the slim mid-fuselage of aircraft such as the Messerschmitt Me P.1112, P.1106, and the indisputably wasp-waisted Focke-Wulf Fw 1000x3 type A long range bomber, but also apparent in delta wing designs like the Henschel Hs 135. Several other researchers came close to developing a similar theory, notably Dietrich Küchemann who designed a tapered fighter that was dubbed the “Küchemann Coke Bottle” when it was discovered by U.S. forces in 1946. In this case Küchemann arrived at the solution by studying airflow, notably spanwise flow, over a swept wing. The swept wing is already an indirect application of the area rule.

United States

Wallace D. Hayes, a pioneer of supersonic flight, developed the supersonic area rule in publications beginning in 1947 with his Ph.D. thesis at the California Institute of Technology.[5]

Richard T. Whitcomb, after whom the rule is named, independently discovered this rule in 1952, while working at the NACA. While using the new Eight-Foot High-Speed Tunnel, a wind tunnel with performance up to Mach 0.95 at NACA's Langley Research Center, he was surprised by the increase in drag due to shock wave formation. Whitcomb realized that, for analytical purposes, an airplane could be reduced to a streamlined body of revolution, elongated as much as possible to mitigate abrupt discontinuities and, hence, equally abrupt drag rise.[6] The shocks could be seen using Schlieren photography, but the reason they were being created at speeds far below the speed of sound, sometimes as low as Mach 0.70, remained a mystery.

In late 1951, the lab hosted a talk by Adolf Busemann, a famous German aerodynamicist who had moved to Langley after World War II. He talked about the difference in the behavior of airflow at speeds approaching supersonic, where it no longer behaved as an incompressible fluid. Whereas engineers were used to thinking of air flowing smoothly around the body of the aircraft, at high speeds it simply did not have time to "get out of the way", and instead started to flow as if it were rigid pipes of flow, a concept Busemann referred to as "streampipes", as opposed to streamlines, and jokingly suggested that engineers had to consider themselves "pipefitters".

Several days later Whitcomb had a "Eureka" moment. The reason for the high drag was that the "pipes" of air were interfering with each other in three dimensions. One could not simply consider the air flowing over a 2D cross-section of the aircraft as others could in the past; now they also had to consider the air to the "sides" of the aircraft which would also interact with these streampipes. Whitcomb realized that the Sears-Haack shaping had to apply to the aircraft as a whole, rather than just to the fuselage. That meant that the extra cross-sectional area of the wings and tail had to be accounted for in the overall shaping, and that the fuselage should actually be narrowed where they meet to more closely match the ideal.


Underside of an A-380. Several area rule-dictated features are visible - see text

The area rule was immediately applied to a number of development efforts. One of the most famous was Whitcomb's personal work on the re-design of the Convair F-102 Delta Dagger, a U.S. Air Force jet fighter that was demonstrating performance considerably worse than expected. By indenting the fuselage beside the wings, and (paradoxically) adding more volume to the rear of the plane, transonic drag was considerably reduced and the original Mach 1.2 design speeds were reached. The culminating design of this research was the Convair F-106 Delta Dart, an aircraft which for many years was the USAF's primary all-weather interceptor.

Numerous designs of the era were likewise modified in this fashion, either by adding new fuel tanks or tail extensions to smooth out the profile. The Tupolev Tu-95 'Bear', a Soviet-era bomber, has large bulged landing gear nacelles behind the two inner engines, increasing the aircraft's overall cross section aft of the wing root. Its airliner version has been the fastest propeller-driven aircraft in the world since 1960. The Convair 990 used a similar solution, adding bumps called antishock bodies to the trailing edge of the upper wing. The 990 remains the fastest U.S. airliner in history, cruising at up to Mach 0.89. Designers at Armstrong-Whitworth took the concept a step further in their proposed M-Wing, in which the wing was first swept forward and then to the rear. This allowed the fuselage to be narrowed on either side of the root instead of just behind it, leading to a smoother fuselage that remained wider on average than one using a classic swept wing.

One interesting outcome of the area rule is the shaping of the Boeing 747's upper deck. The aircraft was designed to carry standard intermodal containers in a two-wide, two-high stack on the main deck, which was considered a serious accident risk for the pilots if they were located in a cockpit at the front of the aircraft. They were instead moved above the deck in a small "hump", which was designed to be as small as possible given normal streamlining principles. It was later realized that the drag could be reduced much more by lengthening the hump, using it to reduce wave drag offsetting the tail surface's contribution. The new design was introduced on the 747-300, improving its cruise speed and lowering drag, with the side effect of slightly increasing capacity on passenger flights.

Aircraft designed according to Whitcomb's area rule looked odd at the time they were first tested, (e.g., the Blackburn Buccaneer), and were dubbed "flying Coke bottles," but the area rule is effective and came to be an expected part of the appearance of any transonic aircraft. Later designs started with the area rule in mind, and came to look much more pleasing. Although the rule still applies, the visible fuselage "waisting" can only be seen on a few aircraft, such as the B-1B Lancer, Learjet 60, and the Tupolev Tu-160 'Blackjack' — the same effect is now achieved by careful positioning of aircraft components, like the boosters and cargo bay on rockets; the jet engines in front of (and not directly below) the wings of the Airbus A380; the jet engines behind (and not purely at the side of) the fuselage of a Cessna Citation X; the shape and location of the canopy on the F-22 Raptor; and the image of the Airbus A380 above showing obvious area rule shaping at the wing root, which is practically invisible from any other angle.


See also


External links

Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • area rule — A prescribed method of design for obtaining minimum zero lift drag for a given aerodynamic configuration, such as a wing body configuration, at a given speed. For a transonic body, the area rule is applied by subtracting from, or adding to, its… …   Aviation dictionary

  • area rule — noun a process used in aerodynamics to reduce drag, typically by narrowing the fuselage at the wing roots …   Wiktionary

  • area rule — /ˈɛəriə rul/ (say airreeuh roohl) noun a method of design for obtaining minimum drag from the overall configuration of an aircraft …  

  • Rule 184 — is a one dimensional binary cellular automaton rule, notable for solving the majority problem as well as for its ability to simultaneously describe several, seemingly quite different, particle systems:* Rule 184 can be used as a simple model for… …   Wikipedia

  • Rule — Rule, TX U.S. town in Texas Population (2000): 698 Housing Units (2000): 386 Land area (2000): 0.695637 sq. miles (1.801692 sq. km) Water area (2000): 0.000000 sq. miles (0.000000 sq. km) Total area (2000): 0.695637 sq. miles (1.801692 sq. km)… …   StarDict's U.S. Gazetteer Places

  • Rule, TX — U.S. town in Texas Population (2000): 698 Housing Units (2000): 386 Land area (2000): 0.695637 sq. miles (1.801692 sq. km) Water area (2000): 0.000000 sq. miles (0.000000 sq. km) Total area (2000): 0.695637 sq. miles (1.801692 sq. km) FIPS code:… …   StarDict's U.S. Gazetteer Places

  • Rule of Rose — Saltar a navegación, búsqueda Rule of Rose (Regla de la Rosa) es un videojuego del género survival horror para la consola de videojuegos PlayStation 2 desarrollado por Punchline y publicado en 2006. El juego esta centrado en los años 1930 s y… …   Wikipedia Español

  • Rule induction — is an area of machine learning in which formal rules are extracted from a set of observations. The rules extracted may represent a full scientific model of the data, or merely represent local patterns in the data. Paradigms Some major rule… …   Wikipedia

  • Area code 785 — is the area code for telephone exchanges in most of northern Kansas. The area code stretches from the Colorado state line on the west to the Missouri state line on the east, but does not include the Kansas City Metropolitan Area.The largest city… …   Wikipedia

  • rule with an iron fist/hand — (chiefly US) (or Brit rule with a rod of iron) : to rule a country, area, group, etc., in a very strict and often cruel way The dictator ruled (the island) with an iron fist. • • • Main Entry: ↑ …   Useful english dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”