An example of alkene polymerization, in which each Styrene monomer unit's double bond reforms as a single bond with another styrene monomer and forms polystyrene.

In polymer chemistry, polymerization is a process of reacting monomer molecules together in a chemical reaction to form three-dimensional networks or polymer chains.[1][2][3] There are many forms of polymerization and different systems exist to categorize them.



A + A + A... \rightarrow AAA ...
A + B + A... \rightarrow ABA ...

In chemical compounds, polymerization occurs via a variety of reaction mechanisms that vary in complexity due to functional groups present in reacting compounds[4] and their inherent steric effects explained by VSEPR Theory. In more straightforward polymerization, alkenes, which are relatively stable due to σ bonding between carbon atoms form polymers through relatively simple radical reactions; in contrast, more complex reactions such as those that involve substitution at the carbonyl group require more complex synthesis due to the way in which reacting molecules polymerize.[4]

As alkenes can be formed in somewhat straightforward reaction mechanisms, they form useful compounds such as polyethylene and polyvinyl chloride (PVC) when undergoing radical reactions,[4] which are produced in high tonnages each year[4] due to their usefulness in manufacturing processes of commercial products, such as piping, insulation and packaging. Polymers such as PVC are generally referred to as "homopolymers" as they consist of repeated long chains or structures of the same monomer unit, whereas polymers that consist of more than one molecule are referred to as copolymers (or co-polymers).[5]

Other monomer units, such as formaldehyde hydrates or simple aldehydes, are able to polymerize themselves at quite low temperatures (>-80oC) to form trimers;[4] molecules consisting of 3 monomer units which can cyclize to form ring cyclic structures, or undergo further reactions to form tetramers,[4] or 4 monomer-unit compounds. Further compounds either being referred to as oligomers[4] in smaller molecules. Generally, because formaldehyde is an exceptionally reactive electrophile it allows nucleophillic addition of hemiacetal intermediates, which are generally short lived and relatively unstable "mid stage" compounds which react with other molecules present to form more stable polymeric compounds.

Polymerization that is not sufficiently moderated and proceeds at a fast rate can be very hazardous. This phenomenon is known as Hazardous polymerization and can cause fires and explosions.


Step-growth polymers are defined as polymers formed by the stepwise reaction between functional groups of monomers. Most step-growth polymers are also classified as condensation polymers, but not all step-growth polymers (like polyurethanes formed from isocyanate and alcohol bifunctional monomers) release condensates, in this case we talk about addition polymers. Step-growth polymers increase in molecular weight at a very slow rate at lower conversions and reach moderately high molecular weights only at very high conversion (i.e. >95%).

To alleviate inconsistencies in these naming methods, adjusted definitions for condensation and addition polymers have been developed. A condensation polymer is defined as a polymer that involves loss of small molecules during its synthesis, or contains functional groups as part of its backbone chain, or its repeat unit does not contain all the atoms present in the hypothetical monomer to which it can be degraded.


Chain-growth polymerization (or addition polymerization) involves the linking together of molecules incorporating double or triple chemical bonds. These unsaturated monomers (the identical molecules that make up the polymers) have extra internal bonds that are able to break and link up with other monomers to form the repeating chain. Chain-growth polymerization is involved in the manufacture of polymers such as polyethylene, polypropylene, and polyvinyl chloride (PVC). A special case of chain-growth polymerization leads to living polymerization.

In the radical polymerization of ethylene, its pi bond is broken, and the two electrons rearrange to create a new propagating center like the one that attacked it. The form this propagating center takes depends on the specific type of addition mechanism. There are several mechanisms through which this can be initiated. The free radical mechanism was one of the first methods to be used. Free radicals are very reactive atoms or molecules that have unpaired electrons. Taking the polymerization of ethylene as an example, the free radical mechanism can be divided in to three stages: chain initiation, chain propagation, and chain termination.

Polymerization of ethylene

Free radical addition polymerization of ethylene must take place at high temperatures and pressures, approximately 300°C and 2000 atm. While most other free radical polymerizations do not require such extreme temperatures and pressures, they do tend to lack control. One effect of this lack of control is a high degree of branching. Also, as termination occurs randomly, when two chains collide, it is impossible to control the length of individual chains. A newer method of polymerization similar to free radical, but allowing more control involves the Ziegler-Natta catalyst, especially with respect to polymer branching.

Other forms of chain growth polymerization include cationic addition polymerization and anionic addition polymerization. While not used to a large extent in industry yet due to stringent reaction conditions such as lack of water and oxygen, these methods provide ways to polymerize some monomers that cannot be polymerized by free radical methods such as polypropylene. Cationic and anionic mechanisms are also more ideally suited for living polymerizations, although free radical living polymerizations have also been developed.

See also


  1. ^ Introduction to Polymers 1987 R.J. Young Chapman & Hall ISBN 0-412-22170-5
  2. ^ International Union of Pure and Applied Chemistry, et al. (2000) "IUPAC Gold Book" Retrieved on 11 May 2007 from "IUPAC Gold Book" on http://goldbook.iupac.org/
  3. ^ Clayden, J., Greeves, N. et al. (2000). "Organic chemistry" Oxford
  4. ^ a b c d e f g Clayden, J., Greeves, N. et al. (2000), p1450-1466
  5. ^ J.M.G. Cowie "Polymers: Chemistry and Physics of Modern Materials (Chapman and Hall, 2d ed. 1991) p.4

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • Polymerization — Pol y*mer i*za tion, n. (Chem.) The act or process of changing to a polymeric form; the condition resulting from such change. [1913 Webster] …   The Collaborative International Dictionary of English

  • polymerization — polymerization. См. полимеризация. (Источник: «Англо русский толковый словарь генетических терминов». Арефьев В.А., Лисовенко Л.А., Москва: Изд во ВНИРО, 1995 г.) …   Молекулярная биология и генетика. Толковый словарь.

  • polymerization — (n.) 1872, from POLYMER (Cf. polymer) + IZE (Cf. ize) + ATION (Cf. ation) …   Etymology dictionary

  • polymerization — (Amer.) pÉ™ lɪmÉ™rÉ™ zeɪʃn / raɪ z n. combination of two or more separate molecules to form a more complex molecule (also polymerisation) …   English contemporary dictionary

  • polymerization — [pō lim΄ər ə zā′shən, pəlim΄ər ə zā′shən; päl΄i mər əi zā′shən] n. 1. the process of chaining together many simple molecules to form a more complex molecule with different physical properties 2. the changing of a compound into a polymeric form by …   English World dictionary

  • polymerization — /peuh lim euhr euh zay sheuhn, pol euh meuhr /, n. Chem. 1. the act or process of forming a polymer or polymeric compound. 2. the combination of many like or unlike molecules to form a more complex product of higher molecular weight, with… …   Universalium

  • polymerization — condensation polymerization …   Mechanics glossary

  • polymerization — polimerizacija statusas T sritis chemija apibrėžtis Monomero ar monomerų mišinio pavertimas polimeru. atitikmenys: angl. polymerization rus. полимеризация …   Chemijos terminų aiškinamasis žodynas

  • polymerization — polimerizacija statusas T sritis fizika atitikmenys: angl. polymerization vok. Polymerisation, f rus. полимеризация, f pranc. polymérisation, f …   Fizikos terminų žodynas

  • polymerization shrinkage — the decrease in volume of dental resin as polymerization occurs …   Medical dictionary

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”