- Honeywell 316
-
Honeywell 316 
Release date 1969 Memory 4 kB to 32 kB magnetic core The Honeywell 316 was a popular 16-bit minicomputer built by Honeywell starting in 1969. It is part of the Series 16 which includes the Models 116, 316, 416, 516 and 716. They were commonly used for data acquisition and control, remote message concentration, clinical laboratory systems and time-sharing. The Series 16 computers are all based on the DDP-116 designed by Gardner Hendrie at Computer Control Company, Inc. (3C) in 1964.
The H-316 was used by Charles H. Moore to develop the first complete, stand-alone implementation of Forth at NRAO.[1] They were used as ARPANET Interface Message Processors (IMP) but could also be configured as a Terminal IMP (TIP) which added support for up to 63 Teletype machines through a multi-line controller.[2]
The original Prime computers were designed to be compatible with the Series 16 minicomputers.[3]
Contents
Hardware description
The 316 succeeded the earlier DDP-516 model and was promoted by Honeywell as suitable for industrial process control, data acquisition systems, and as a communications concentrator and processor. The computer processor was made of small-scale integration DTL monolithic integrated circuits. Most parts of the system operated at 2.5 MHZ but some elements were clocked at 5 MHZ.[4] The computer was a bitwise-parallel 2's complement system with 16 bit word length. The instruction set was a single-address type with an index register.[5] Initially released with a capacity of 4096 through 16,385 words of memory, later expansion options allowed increasing memory space to 32,768 words. Memory cycle time was 1.6 microseconds; an integer register-to-register "add" instruction took 3.2 microseconds. An optional hardware extension was available to implement arithmetic on single- and double-precision floating point values; the basic processor relied on software to carry out floating point calculations.
The programmer's model of the H/316 consisted of the following registers:
- The 16-bit A register was the primary arithmetic and logic accumulator
- the 16-bit B register was used for double-length arithmetic operations
- the program counter was 16 bits long and contained the address of the next instruction.
- A carry flag indicated arithmetic overflow and was used for multiple-precision calculation.
- A 16-bit X index register was also provided for modification of the address of operands.
The instruction set had 72 arithmetic, logic, I/O and program flow control instructions.
Input/output instructions used the A register and separate input and output 16-bit buses. A 10 bit I/O control bus, consisting of 6 bits of device address information and 4 bits of function selection, was used. The basic processor had a single interrupt signal line, but an option provided up to 48 interrupts.
In addition to a front panel display of lights and toggle switches, the system supported different types of input/output devices. One or more Teletype Model 33 ASR teleprinters could be used as console I/O devices, and to load and store data to paper tape. Card readers and punches could also be included. The Honeywell family of peripherals included magnetic tape, fixed disk with a capacity of 3.6 million bytes, and the drum stored 196 thousand bytes.
A rack-mounted configuration weighed around 150 pounds and used 475 watts of power. Honeywell advertised the system as the first minicomputer selling for less than $10,000.
The Honeywell 316 has the distinction of being the first computer displayed at a computer show with RAM memory. In 1972, a Honeywell 316 was displayed with a RAM memory board (they used core memory previously). It was never placed into production, as DTL was too power hungry to survive much longer. Honeywell knew that the same technology that enabled the production of RAM spelled the end of DTL computers, but wanted to show that the company was cutting edge.
System software
Honeywell provided up to 500 software packages that could run on the H/316 processor. A FORTRAN IV compiler was available, as well as an assembler, real time disk operating systems and system utilities and libraries.
Kitchen Computer
An ad for the Kitchen Computer. The tagline is "If she can only cook as well as Honeywell can compute"
The Honeywell Kitchen Computer or H316 pedestal model of 1969 was a short-lived product made by Honeywell and offered by Neiman Marcus as one of a continuing series of extravagant gift ideas.[6] It sold for $10,000, weighed over 100 pounds, and was advertised as useful for storing recipes. Reading or entering these recipes would have been very difficult for the average cook, since the user interface required the person to take a two-week course to learn to program the device, using only toggle-switch input and binary light output. It had a built in cutting board and had a few recipes built in. No evidence has been found that any Honeywell Kitchen Computers were ever sold.[7]
The full text of the Neiman-Marcus Advertisement reads:
"If she can only cook as well as Honeywell can compute."
"Her souffles are supreme, her meal planning a challenge? She's what the Honeywell people had in mind when they devised our Kitchen Computer. She'll learn to program it with a cross-reference to her favorite recipes by N-M's own Helen Corbitt. Then by simply pushing a few buttons obtain a complete menu organized around the entree. And if she pales at reckoning her lunch tabs, she can program it to balance the family checkbook. 84A 10,600.00 complete with two week programming course. 84B Fed with Corbitt data: the original Helen Corbitt cookbook with over 1,000 recipes $100 (.75) 84C Her Potluck, 375 of our famed Zodiac restaurant's best kept secret recipes 3.95 (.75) Corbitt Epicure 84D Her Labaird Apron, one-size, ours alone by Clairdon House, multi-pastel provencial cotton 26.00 (.90) Trophy Room"
Although a fantasy gift, the Kitchen Computer represented the first time a computer was offered as a consumer product.[8]
Notes
- ^ The Evolution of Forth
- ^ Ornstein, S. M.; Heart, F. E.; Crowther, W. R.; Rising, H. K.; Russell, S. B.; Michel, A. (1971), "The terminal IMP for the ARPA computer network", Proceedings of the November 16–18, 1971, fall joint computer conference: 243–254, doi:10.1145/1478873.1478906, http://portal.acm.org/citation.cfm?id=1478873.1478906, retrieved 2009-07-19
- ^ Comp.Sys.Prime FAQ
- ^ Honeywell H316 General Purpose Digital Computer, Honeywell publication 316C-96910
- ^ http://www.bitsavers.org/pdf/honeywell/series16/h316/70130072156_316_516_PgmrRef_Nov70.pdf Programmer's Reference, November 1970 retrieved 2010 Jan 31
- ^ http://books.google.com/books?id=hysEAAAAMBAJ&pg=RA1-PA147&dq=Neiman-Marcus+catalog&hl=en&ei=H91GTevhJsjBhAfvo_zYAQ&sa=X&oi=book_result&ct=result&resnum=8&ved=0CGMQ6AEwBw#v=onepage&q=Neiman-Marcus%20catalog&f=false The His and Her Gift, Texas Monthly, Decwember 1985 page 147
- ^ Three Chapters in the History of Home Automation
- ^ http://jdh.oxfordjournals.org/content/23/2/163.full.pdf Paul Atkinson, The Curious Case of the Kitchen Computer: Products and Non-Products in Design History, from Journal of Design History, Vol. 23 No.2 doi:10.1093.jdh/epq010
See also
External links
Categories:- Honeywell computers
- Minicomputers
Wikimedia Foundation. 2010.
