Oxygen-free copper

Oxygen-free copper
The CuOFP capsule used as overpack for spent nuclear fuel disposal in the KBS-3 concept (Finnish version)

Oxygen-free copper (OFC) or Oxygen-free high thermal conductivity (OFHC) copper generally refers to a group of wrought high conductivity copper alloys that have been electrolytically refined to reduce the level of oxygen to .001% or below.[1][2]



Oxygen-free copper is typically specified according to the ASTM/UNS database.[3] The UNS database includes many different compositions of high conductivity electrical copper. Of these three are widely used and two are considered oxygen-free.

  • C10100 - also known as Oxygen-Free Electronic (OFE). This is a 99.99%pure copper with 0.0005% oxygen content. It achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment. Silver (Ag) is considered an impurity in the OFE chemical specification. This is also the most expensive of the three grades listed here.
  • C10200 - also known as Oxygen-Free (OF). While OF is considered oxygen-free, its conductivity rating is no better than the more common ETP grade below. It has a 0.001% oxygen content, 99.95% purity and minimum 100% IACS conductivity. For the purposes of purity percentage, silver (Ag) content is counted as copper (Cu).
  • C11000 - also known as Electrolytic-Tough-Pitch (ETP). This is the most common copper. It is universal for electrical applications. ETP has a minimum conductivity rating of 100% IACS and is required to be 99.9% pure. It has 0.02% to 0.04% oxygen content (typical). Most ETP sold today will meet or exceed the 101% IACS specification. As with OF copper, silver (Ag) content is counted as copper (Cu) for purity purposes.

Oxygen-free high thermal conductivity

Oxygen-free high thermal conductivity (OFHC) copper is widely used in cryogenics. OFHC is produced by the direct conversion of selected refined cathodes and castings under carefully controlled conditions to prevent contamination of the pure oxygen-free metal during processing. The method of producing OFHC copper insures extra high grade of metal with a copper content of 99.99%. With so small a content of extraneous elements, the inherent properties of elemental copper are brought forth to a high degree. Characteristics are high ductility, high electrical and thermal conductivity, high impact strength, good creep resistance, ease of welding, and low relative volatility under high vacuum.[4]


Conductivity is generally specified relative to the 1913 International Annealed Copper Standard of 58 MS/m. Advances in the refining process now yield OF and ETP copper that can meet or exceed 101% of this standard. (Ultra-pure copper has a conductivity of 58.65 MS/m, 102.75% IACS.) Note that OF and ETP coppers have identical conductivity requirements.[5]

Oxygen plays a beneficial role for improving copper conductivity. During the copper smelting process, oxygen is deliberately injected into the melt to scavenge impurities that would otherwise degrade conductivity.[6]

There are advanced refining processes such as Czochralski process than can be used to reduce impurity levels to below the C10100 specification by reducing copper grain density.[citation needed] At this time, there are currently no UNS/ASTM classifications for these specialty coppers and the IACS conductivity of these coppers is not readily available.

Industrial applications

For industrial applications, oxygen-free copper is valued more for its chemical purity than its electrical conductivity. OF/OFE grade copper is used in plasma deposition (sputtering) processes, including the manufacture of semiconductors and superconductor components, as well as in high vacuum devices such as particle accelerators. In any of these applications, the release of oxygen (and/or other impurities) can cause undesirable chemical reactions with other materials in the local environment.[7]

Use in home audio

The high-end audio cable industry markets oxygen-free copper as having enhanced conductivity or other electrical properties that are significantly advantageous to audio signal transmission. However, conductivity specifications for common C11000 Electrolytic-Tough-Pitch (ETP) and higher-cost C10200 Oxygen-Free (OF) coppers are identical.[8] Much more expensive C10100, a highly refined copper with silver impurities removed and oxygen reduced to 0.0005%, has only a one percent increase in conductivity rating, insignificant in audio applications.[8] OFC is nevertheless valued by some for both audio and video signals in audio playback systems and home cinema.[8]

Oxygen-free phosphorus-containing copper

High electrical conductivity coppers are distinct from coppers deoxidized by the addition of phosphorus in the smelting process. Oxygen-free phosphorus-containing copper (CuOFP) is typically used for structural and thermal applications where the copper material will be subject to temperatures high enough to cause hydrogen embrittlement or more exactly steam embrittlement. Examples include welding/brazing rods and heat exchanger tubing.[9]

Indeed, copper alloys which contain oxygen as an impurity (in the form of residual oxides present in the metal matrix) can be embrittled if exposed to hot hydrogen. The hydrogen diffuses through the copper and reacts with inclusions of Cu2O, forming H2O (water), which then forms pressurized water steam bubbles at the grain boundaries. This process can cause the grains to literally be forced away from each other, and is known as steam embrittlement (because steam is produced, not because exposure to steam causes the problem).

CuOFP has been selected as corrosion resistant material for the overpack of spent nuclear fuel in the KBS-3 concept developed in Sweden and Finland to dispose high-level radioactive waste in crystalline rock formations.


  1. ^ "Innovations: Introduction to Copper: Types of Copper". Copper.org. 2010-08-25. http://www.copper.org/innovations/2001/08-intro/intro_toc.html. Retrieved 2011-07-05. 
  2. ^ "ASTM Standard Designation for Wrought and Cast Copper and Copper Alloys". Resources: Standards & Properties. Copper.org. 2010-08-25. http://www.copper.org/resources/properties/db/SDResultServlet.jsp?Action=search&service=COPPERINTRA&ACtype=Wrought&Alloy=Coppers&term=Coppers&alloyStart=C10100&alloyEnd=C12000. Retrieved 2011-07-05. 
  3. ^ "ASTM Standard Designation for Wrought and Cast Copper and Copper Alloys: Introduction". Copper.org. 2010-08-25. http://www.copper.org/resources/properties/standard-designations/introduction.html. Retrieved 2011-07-05. 
  4. ^ "Oxygen-Free Copper". Anchorbronze.com. http://www.anchorbronze.com/wroughtcopper.htm. Retrieved 2011-07-05. 
  5. ^ "Innovations in Copper: Electrical and Metallurgy of Copper: High Copper Alloys". Copper.org. 2010-08-25. http://www.copper.org/innovations/2006/09/high_cu_alloys.html#electr. Retrieved 2011-07-05. 
  6. ^ "Innovations : The Metallurgy of Copper Wire". Copper.org. 2010-08-25. http://www.copper.org/innovations/1997/12/wiremetallurgy.html#xgncntnt. Retrieved 2011-07-05. 
  7. ^ http://www.hitachi-cable.co.jp/catalog/CE100.pdf
  8. ^ a b c Russell, Roger. "Speaker Wire – A History". http://www.roger-russell.com/wire/wire.htm. Retrieved August 25, 2011. 
  9. ^ "sec72". Cda.org.uk. 2011-05-31. http://www.cda.org.uk/megab2/elecapps/pub122/sec72.htm#Phosphorus%20deoxidised%20copper%20(Cu-DHP). Retrieved 2011-07-05. 

Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Oxygen-free copper — Oxygen free copper. См. Безкислородная медь. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

  • oxygen-free copper — Смотри бескислородная медь …   Энциклопедический словарь по металлургии

  • Oxygen-free — may refer to the absence of oxygen in an environment or in a material. Environmental conditions Anoxic, an environment with low, or near zero, oxygen content; Anaerobic, a technical word which literally means without air (where air is generally… …   Wikipedia

  • Copper wire and cable — Copper has been used in electric wiring since the invention of the electromagnet and the telegraph in the 1820s.[1][2] The invention of the telephone in 1876 proved to be another early boon for copper wire.[3] Today, despite competition from… …   Wikipedia

  • Copper toxicity — Classification and external resources A Kayser Fleischer ring. Copper deposits are found in the cornea. This is an indication that the body is not metabolizing copper properly. ICD 10 …   Wikipedia

  • Copper ion swimming pool system — Copper ion swimming pool systems use a low voltage current across copper bars (solid copper, or a mixture of copper and zinc or silver) to free copper ions into the flow of pool water to kill organisms such as algae in the water and provide a… …   Wikipedia

  • Copper in health — Normal absorption and distribution of copper. Cu = copper, CP = ceruloplasmin, green = ATP7B carrying copper. Copper is an essential trace element that is vital to the health of all living things (humans, plants, animals, and microorganisms). In… …   Wikipedia

  • Oxygen toxicity — Classification and external resources In 1942–43 the UK Government carried out extensive testing for oxygen toxicity in divers. The chamber is pressurised with air to 3.7  …   Wikipedia

  • Copper indium gallium selenide solar cells — Copper indium gallium selenide (CuIn1 xGaxSe2 or CIGS) is a direct bandgap semiconductor useful for the manufacture of solar cells. Because the material strongly absorbs sunlight, a much thinner film is required than of other semiconductor… …   Wikipedia

  • Copper(II) chloride — Anhydrous Anhydrous …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”