N104RB Red Baron

N104RB Red Baron
Red Baron
Type Lockheed F-104 Starfighter
Construction number (c/n 2051-hybrid)
Registration N104RB
Fate Destroyed during flight accident

The Red Baron was a highly modified Lockheed F-104 Starfighter which set a FAI Class C-1 Group III 3 km speed record of 988.26 mph, in 1977 which still stands.[1] It was assembled by Darryl Greenamyer and sponsored by Ed Browning and the Red Baron Flying Service of Idaho Falls, Idaho. The aircraft was destroyed in an accident in 1978.

Contents

History

Greenamyer built the Starfighter by collecting and putting together myriad parts over a 13 year period. The cockpit side panels and some control column bearings of the Red Baron came from the very first production F-104A, which crashed in Palmdale, California 22 years earlier. The tail of the Red Baron, minus stabilizers, came from a junkyard in Ontario, California. The stabilizers and some nose wheel parts were from scrap piles in Tucson and Homestead, Florida. The idler arm for the elevator controls, the ejection seat rails and some electrical relays came from an F-104 that crashed and burned at Edwards Air Force Base on the edge of the Mojave Desert. Greenamyer got his throttle quadrant from a Tennessee flying buff he met at the Reno Air Races. The trunnion mounts for the nose gear, some of the cooling-system valves and a few relays on the Red Baron came from a 25-ton pile of junk that Greenamyer bought at Eglin Air Force Base. In a swap with NASA, he obtained the nose of a Lockheed NF-104A, with its reaction controls. The all-important J79-GE-10 engine was obtained from the US Navy.[2]

Greenamyer's ultimate goal was to reclaim the altitude record, which had been set by a Russian MiG-25 Foxbat. His attempt at the speed record was for the purpose of raising enough funding to enable the altitude attempt. To combat the effects of high altitude, Greenamyer developed a system to water-cool the air at the engine intakes—effectively increasing the air density. He also installed the nose of a Lockheed NF-104A with eight hydrogen peroxide thrusters around the nose to provide added directional stability as the control surfaces lost effect. [3]

Flight records and fate

On 2 October 1976 Greenamyer flew an average 1010 mph at Mud Lake near Tonopah, Nevada. A tracking camera malfunction eliminated the necessary proof for formal records. On 24 October 1977 Greenamyer flew a 3km official FAI record flight of 988.26 mph.[4]

On 26 February 1978 Greenamyer made a practice run for the altitude record attempt. After the attempt, he was unable to get a lock light on the left wheel; after multiple touch-and-go tests at an Edwards Air Force Base runway, he determined that it was not safe to land. He ejected, and the N104RB crashed in the desert.[5]

Specifications

Data from[citation needed]

General characteristics

Performance

Notes

  1. ^ History of Records: Darryl G. GREENAMYER (USA) Retrieved 13 July 2011.
  2. ^ 'Goodby To A Red Baron' Sports Illustrated. June 12, 1978. Retrieved 29 June 2011.
  3. ^ Emerson, Ralph L. 'Speed Dash in a Home Made Jet.' Popular Mechanics. June 1977. Retrieved 14 July 2011.
  4. ^ International F-104 Society. Retrieved 13 July 2011.
  5. ^ Lednicer, David. "Lockheed F-104A Starfighter aircraft." airliners.net, May 22, 2005. Retrieved 14 July 2011.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Darryl Greenamyer — is an American aviator. He started his flying career in the US Air Force Reserve.[1] After leaving the Air Force, he then began to work at Lockheed where he eventually became an SR 71 test pilot at Skunk works. While working at Lockheed he met… …   Wikipedia

  • List of F-104 Starfighter operators — The List of F 104 Starfighter operators lists the countries and their air force units that have operated the F 104 Starfighter.Military operatorsBELBelgium operated F 104G and TF 104Gs. They served with four squadrons: 23 and 31 (fighter bombers) …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”