Capacitance Electronic Disc

Capacitance Electronic Disc
Capacitance Electronic Discs
Ced cart2.jpg
The CED, exposed from protective caddy
Media type video playback media
Capacity 60 minutes NTSC video per side, 27,000 frames per side[1]
Read mechanism Stylus
Usage Home video

The Capacitance Electronic Disc (CED) was an analog video video disc playback system developed by RCA, in which video and audio could be played back on a TV set using a special needle and high-density groove system similar to phonograph records.

First conceived in 1964, the CED system was widely seen as a technological success which was able to increase the density of a long-playing record by two orders of magnitude.[2] Despite this achievement, the CED system fell victim to poor planning, conflicts within RCA, and technical difficulties that stalled production of the system for 17 years until 1981, by which time it was outmoded by the DiscoVision (LaserDisc) and emerging Betamax and VHS videocassette formats. Sales for the system were nowhere near projected estimates, and by 1986, RCA had discontinued the project, losing an estimated $600 million in the process. RCA had initially intended to release the SKT425 CED player with their high end Dimensia system in 1984, but cancelled the CED player as part of the system just prior to the release of the Dimensia system.[3]

The format was commonly known as "videodisc", leading to much confusion with the contemporary Laserdisc format. Laserdiscs were read optically with a laser beam, whereas CED videodiscs were read physically with a stylus, rather like a conventional gramophone record. The two systems were mutually incompatible.

The name "SelectaVision" was RCA's brand name for the CED system. It was also used for some early RCA brand VCRs,[4] and other experimental projects at RCA.[5][6]



Beginnings and release

RCA began videodisc research in 1964, in an attempt to produce a phonograph-like method of reproducing video. Research and development was slow in the early years, as the development team originally comprised only four men,[7] but by 1972, the CED team at RCA had produced a disc capable of holding ten minutes of color video (a portion of the Get Smart episode entitled "Lum Fong").[8]

The first CED prototype discs were multi-layered, implementing a nickel substrate within the platter. However, premature failure of the multilayer discs, usually from separation of the layers and resulting in damage to the player if a disc in such condition was played, forced RCA to search for solutions to the problem or alternative materials for constructing the disc.[9] The final disc would be crafted using PVC blended with carbon to allow the disc to be conductive. To preserve stylus and groove life, a thin layer of silicone was applied to the disc as a lubricant.[10]

CED videodiscs were originally meant to be handled by hand, but during testing, it was shown that people were likely to accidentally touch the signal surface of the disc, causing signal degradation at the touched area. Thus, an idea was developed in which the disc would be stored and handled in a caddy from which the CED would be extracted by the player.[11]

After seventeen years of research and development, the first CED player (model SFT100W) were released in March 1981. A catalog of approximately 50 titles were released at the same time.[12] Fifteen months later, RCA released the SGT200 and SGT250 players, both with stereo sound. Models with remote controls and random access hit the market in spring and fall, 1983, respectively.


Several problems doomed the new CED system almost from the start. From an early point in the development of the CED system, it was clear that VCRs and home videotape - with their longer storage capacity and recording capabilities - would pose a threat to the CED system.[13] However, development pushed ahead; to dispose of all the work done at RCA would have cost the company millions of dollars. Once finally released, sales for the new CED system were slow; RCA had expected to sell 200,000 players by the beginning of 1982, but only half had been sold, and throughout 1982 and '83, sales did not improve much.[2][14]

"...Machiavelli noted that '..there is nothing more difficult to take in hand, more perilous to conduct, or more uncertain in its success, than to take the lead in the introduction of a new order of things...' At videodisc, I believe these words had special significance..."
Dr. Jay J. Brandinger, Vice President, RCA SelectaVision Videodisc Operations, June 27, 1986.[15]

The long period of development — caused in part by political turmoil and a great deal of turnover in the high command of RCA — also contributed to the demise of the CED system. RCA had originally slated the videodisc system for a 1977 release. However, the discs were still not able to hold more than thirty minutes of video per side, and the nickel-like material used by RCA to make discs was not sturdy enough to put into manufacturing. Signal degradation was also an issue, as the handling of the discs was causing them to deteriorate more rapidly than expected, baffling engineers.

RCA had hoped that by 1981 CED players would be in close to 50% of American homes,[2] but the sales of players continued to drop. RCA attempted to cut the prices of CED players and offer special incentives to consumers, but sales did not recover, and by April of 1984, executives realized that the system would not be as successful as projected and cancelled production of CED players.[14] In a strange twist, sales of the videodiscs themselves were twice the projected rate, so RCA announced that videodiscs would be produced for at least another three years after the discontinuation of players. After this announcement, however, the sale of discs declined severely, causing RCA to abandon disc production after only two years.[16] The last titles released were The Jewel of the Nile by CBS/Fox Video,[17] and Memories of VideoDisc, a commemorative CED given to many RCA employees involved with the CED project,[18] both in 1986.

How CEDs work

CEDs are conductive vinyl platters that are 30.0 cm (11.8 in) in diameter. To avoid metric names they are usually called "12 inch discs". The two sides of a CED each have a spiral groove up to 12 miles (19 km) long with a width of about one thirty-seventh that of a phonograph record. The discs rotate at a constant speed during playback (450 rpm for NTSC, 500 rpm for PAL) and each rotation contains several full frames (four frames for NTSC, three for PAL). This meant that freeze frame was impossible on players without an expensive electronic frame store facility.

A keel-shaped needle with a titanium electrode layer rides in the groove with extremely light tracking force, and an electronic circuit is formed through the disc and stylus. The video and audio signals are stored on the Videodiscs in a composite analog signal which is encoded into vertical undulations in the bottom of the groove, somewhat like pits. These undulations have a shorter wavelength than the length of the stylus tip in the groove, and the stylus rides over them; the varying amount of air space between the stylus tip and the undulations in the groove under it directly controls the capacitance between the stylus and the conductive carbon-loaded PVC disc. This varying capacitance in turn alters the frequency of a resonant circuit, producing an FM electrical signal which is then decoded into video and audio signals by the player's electronics.

The capacitive stylus pickup system which gives the CED its name can be contrasted with the technology of the conventional phonograph. Whereas the phonograph stylus physically vibrates with the variations in the record groove, and those vibrations are converted by a mechanical transducer (the phono pickup) to an electrical signal, the CED stylus normally does not vibrate and moves only to track the CED groove (and the disc surface—out-of-plane), while the signal from the stylus is natively obtained as an electrical signal. This more sophisticated system, combined with a high revolution rate, is necessary to enable the encoding of video signals with bandwidth of a few megahertz, compared to a maximum of 20 kilohertz for an audio-only signal—a difference of two orders of magnitude. Also, while the undulations in the bottom of the groove may be likened to pits, it is important to note that the spacing of vertical wave crests and troughs in a CED groove is continuously variable, as the CED is an analog medium. Usually, the term "pits," when used in the context of information media, refers to features with sharply defined edges and discrete lengths and depths, such as the pits on digital optical media such as CDs and DVDs.

In order to maintain an extremely light tracking force, the stylus arm is surrounded by coils which sense deflection, and a circuit in the player responds to the signals from these coils by moving the stylus head carriage in steps as the groove pulls the stylus across the disc. Other coils are used to deflect the stylus, to finely adjust tracking. This system is very similar to—yet predates—the one used in Compact Disc players to follow the spiral optical track, where typically a servo motor moves the optical pickup in steps for coarse tracking and a set of coils tilts the laser lens for fine tracking, both guided by an optical sensing device which is the analogue of CED stylus deflection sensing coils. For the CED player, this tracking arrangement has the additional benefit that the stylus drag angle remains uniformly tangent to the groove, unlike the case for a phonograph tonearm in which the stylus drag angle and consequently the stylus side force varies with the tone arm angle, which in turn depends on the radial position on the record of the stylus. Whereas for a phonograph, where the stylus has a pinpoint tip, linear tracking is merely ideal to reduce wear of records and styli and to maximize tracking stability, for a CED player linear tracking is a necessity for the keel-shaped stylus, which must always stay tangent to the groove. Furthermore, the achievement of an extremely light tracking force on the CED stylus enables the use of a fine groove pitch (i.e. fine spacing of adjacent revolutions of the spiral,) necessary to provide a long playing time at the required high rotational speed, while also limiting the rate of disc and stylus wear.

The disc is stored inside a caddy, from which the player extracts it when it is loaded. The disc itself is surrounded by a "spine", a plastic ring (actually square on the outside edge) with a thick, straight rim-like edge, which extends outside of, and latches into, the caddy. When a person inserts a caddy containing a disc into the player, the player captures the spine, and both the disc and the spine are left in the player as the person pulls the caddy out. The inner edges of the opening of the caddy have felt strips designed to catch any dust or other debris that could be on the disc as it is extracted. Once the caddy has been withdrawn by the person, the player lowers the disc onto the turntable (which is actually just a hub); the spine is also lowered with it. To start playing the disc, the player spins it up and moves the stylus onto the disc surface.

When Stop is pressed, the stylus is lifted from the disc and returned to its parking location, and the disc and spine are lifted up again to align with the caddy slot. When ready, the slot is unlocked, and the caddy can be inserted and withdrawn by a person, now with the disc back inside.

Advantages of CEDs

CED players, from an early point in their life, appealed to a lower-income market more than VHS, Betamax, and Laserdisc. The video quality (approx 3 MHz of luma bandwidth for CED[19]) was comparable to a VHS-SP or Betamax-II video, but sub-par compared to Laserdisc (about 5 MHz of luma bandwidth).

CED players were intended to be "low-cost". Because they have fewer precision parts than a tape player, a CED player cost at most half as much as videotape recorder to build.[20] The disks themselves could be inexpensively duplicated, stamped out on slightly-modified audio gramophone record presses.

Like VCRs, CED videodisc players had features like rapid forward/reverse and visual search forward/reverse. They also had a pause feature, though it blanked the screen rather than displaying a still image; many players featured a 'page mode' during which the current block of four successive frames would be repeatedly displayed.

Since CEDs were a disc-based system, they did not require rewinding. Early discs were generally monaural but later discs included stereo sound. (Monaural CED disks were packaged in white protective caddies while stereo disks were packaged in blue protective caddies.) Other discs could be switched between two separate mono audio tracks, providing features such as bilingual audio capability.

Like the Laserdisc and DVD, some CEDs feature random access and that users can quickly move to certain parts of the movie. Each side of a CED disc could be split into up to 63 "chapters", or bands. Two late RCA players (the SJT400 and SKT400) could access these bands in any given order. Unlike its laser-based counterparts, the chapters in a CED are based on minutes of the film, not scenes.

Novelty discs and CED-based games were produced whereby accessing the chapters in a specified order would string together a different story each time. However, only a few were produced before the halt of CED player manufacturing.[21]

Disadvantages of CEDs

In comparison to laserdisc technology, CEDs suffered from the fact that they were a phonograph-like contact medium. RCA estimated that the number of times a CED could be played back, under ideal conditions, was 500.[22] By comparison, a clean, laser rot-free laserdisc could, at least in theory, be played an unlimited number of times (although in practice, repeated handling inevitably results in damage). Since the system used a stylus to read the discs, it was necessary to regularly change the stylus in the player to avoid damage to the videodiscs.

Worn and damaged discs also caused problems for consumers. When a disc began to wear, video and audio quality would severely decline, and the disc would begin to skip more.[22] Several discs suffered from a condition called "video virus", where a CED would skip a great deal due to dust particles stuck in the grooves of the disc. However, playing the disc several times would generally solve this problem.[23]

Unlike VHS tapes, CEDs required a disc flip at some point during the course of most all films, because only sixty minutes of video could be stored per side. If a feature ran over two hours, it was necessary to insert another disc. (In some cases, if a movie's theatrical running time was only slightly longer than two hours—from 120 minutes and a few seconds to 122 minutes—studios would often trim short scenes throughout the movie in order to avoid the expense of issuing two discs.) This problem was not unique to CEDs, as Laserdiscs presented the same difficulty, and some longer features (such as The Ten Commandments (1956) still required more than one tape or disc in the VHS, Beta, and LaserDisc formats.

Less significant disadvantages include lack of support for freeze-frame during pause since CEDs scanned four frames in one rotation versus one frame per rotation on CAV LaserDisc, nor was computer technology advanced enough at the time to outfit the player with a framebuffer affordably. However, a 'page mode' was available on many players that would allow for those four frames to be repeated in an endless loop.[24]

CEDs were also larger than VHS tapes, thicker than laserdiscs and considerably heavier due to the plastic caddies.

Available CED material


CED players were manufactured by five companies - RCA, Hitachi, Sanyo, Toshiba, and an in-house player made by Sears, but seven other companies marketed players manufactured by these companies.[25][26]


Upon release, 50 titles were available for the CED; along with RCA (which included the company's partnership with Columbia Pictures plus Paramount and Disney releases.), CBS Video Enterprises (later CBS/FOX Video) produced the first 50 titles.[15] Eventually, Disney, Paramount Pictures, MCA, MGM, Vestron Video, and other labels began to produce CED discs under their own home video labels, and did so until the end of disc manufacturing in 1986.

See also


  1. ^ "RCA SelectaVision VideoDisc FAQ - What are the technical specifications of the RCA VideoDisc system?". Retrieved 2007-03-07. 
  2. ^ a b c "RCA SelectaVision VideoDisc FAQ - Why did the CED system fail to even come close to RCA's expected market penetration?". Retrieved 2007-03-11. 
  3. ^
  4. ^ "VBT200 - The First RCA SelectaVision VHS Video Cassette Recorder (VCR)". Retrieved 2007-03-14. 
  5. ^ "HoloTape". Retrieved 2007-03-06. 
  6. ^ "MagTape". Retrieved 2007-03-06. 
  7. ^ "First Successful RCA SelectaVision VideoDisc Produced in 1972". Retrieved 2007-03-14. 
  8. ^ "Lum Fong - First Successful RCA VideoDisc Web Page". Retrieved 2007-03-06. 
  9. ^ "Metallized (sic) Dielectric CED VideoDisc Cross Section from 1977". Retrieved 2007-03-10. 
  10. ^ "CED Manufacturing 24 - Silicone Coating Applied to Disc Before Caddy Insertion". Retrieved 2007-03-10. 
  11. ^ "Comparison of 1977 CED Media to Final Production Media". Retrieved 2007-03-10. 
  12. ^ "Race For Your Life, Charlie Brown - The First RCA VideoDisc Title". Retrieved 2007-03-10. 
  13. ^ "Richard Sonnenfeldt's "VIDEODISK" Book Chapter". Retrieved 2007-03-11. 
  14. ^ a b "RCA SelectaVision VideoDisc FAQ - Why did RCA abandon further development of the CED system in April 1984?". Retrieved 2007-03-11. 
  15. ^ a b Jay J. Brandinger (June 27, 1986). Memories of VideoDisc (Capacitance Electronic Disc). Rockville Road, Indiana: RCA, Inc.. 
  16. ^ "Memories of VideoDisc - CED Retailing at G&M Video in Indiana". Retrieved 2007-03-11. 
  17. ^ "Memories of VideoDisc - Milestones - The Last Production CED Title". Retrieved 2007-03-14. 
  18. ^ "Memories of RCA VideoDisc Main Page". Retrieved 2007-03-14. 
  19. ^ "RCA SelectaVision VideoDisc FAQ - What are the technical specifications of the RCA VideoDisc system?". Retrieved 2007-03-07. 
  20. ^ "The early days" by J.K.Clemens and E.O.Keizer. "Electronic Servicing & Technology" magazine 1982 May.
  21. ^ "A Walk Through the Universe CED Web Page". Retrieved 2007-03-12. 
  22. ^ a b "RCA SelectaVision VideoDisc FAQ - How long can I expect my CED VideoDiscs to last?". Retrieved 2007-03-14. 
  23. ^ "RCA SelectaVision VideoDisc FAQ - Why do some of my CED's skip, and what can I do to correct this?". Retrieved 2007-03-14. 
  24. ^ "CED Player Specifications". Retrieved 2008-03-14. 
  25. ^ "RCA SelectaVision VideoDisc FAQ - Who manufactured CED Players, and how many different models are there?". Retrieved 2007-03-18. 
  26. ^ "CED Player Name Brand Links". Retrieved 2007-03-18. 

Further reading

  • Cowie, Jefferson R. Capital Moves: RCA's Seventy-Year Quest for Cheap Labor. Ithaca, N.Y.: Cornell University Press, 1999. ISBN 0-8014-3525-0.
  • Daynes, Rob and Beverly Butler. The VideoDisc Book: A Guide and Directory. New York: John Wiley and Sons, 1984. ISBN 0-471-80342-1.
  • DeBloois, Michael L., ed. VideoDisc/Microcomputer Courseware Design. Englewood Cliffs, N.J.: Educational Technology Publications, 1982. ISBN 0-87778-183-4.
  • Floyd, Steve, and Beth Floyd, eds. The Handbook of Interactive Video. White Plains, NY: Knowledge Industry Publications. 1982. ISBN 0-86729-019-6.
  • Graham, Margaret B.W. RCA and the VideoDisc: The Business of Research. (Also as: The Business of Research: RCA and the VideoDisc.) Cambridge: Cambridge University Press, 1986. ISBN 0-521-32282-0, ISBN 0-521-36821-9.
  • Haynes, George R. Opening Minds: The Evolution of Videodiscs & Interactive Learning. Dubuque, Iowa: Kendall/Hunt Publishing Co., 1989. ISBN 0-8403-5191-7.
  • Howe, Tom. CED Magic: The RCA VideoDisc Collector's Guide. Portland, OR: CED Magic, 1999. ISBN 0-9670013-0-7. (CD-ROM)
  • Isailovi´c, Jordan. VideoDisc and Optical Memory Systems. Englewood Cliffs, N.J.: Prentice-Hall, 1985. ISBN 0-13-942053-3.
  • Lardner, James. Fast Forward: Hollywood, the Japanese, and the VCR Wars. (Also as: Fast Forward: Hollywood, the Japanese, and the Onslaught of the VCR.) New York: W. W. Norton & Co Inc., 1987. ISBN 0-393-02389-3.
  • Lenk, John D. Complete Guide to Laser/VideoDisc Player Troubleshooting and Repair. Englewood Cliffs, N.J.: Prentice-Hall, 1985. ISBN 0-13-160813-4.
  • Schneider, Edward W., and Junius L. Brennion. The Instructional Media Library: VideoDiscs, (Volume 16). Englewood Cliffs, NJ: Educational Technology Publications. ISBN 0-87778-176-1. 1981.
  • Sigel, Efrem, Mark Schubin and Paul F. Merrill. Video Discs: The Technology, the Applications and the Future. White Plains, N.Y. : Knowledge Industry Publications, 1980. ISBN 0-914236-56-3. ISBN 0-442-27784-9.
  • Sobel, Robert. RCA. New York: Stein and Day/Publishers, 1986. ISBN 0-8128-3084-9.
  • Sonnenfeldt, Richard. Mehr als ein Leben (More than One Life). ?, 2003. ISBN 3-502-18680-4. (In German.)
  • Journals:
    • The Videodisc Monitor
    • Videodisc News
    • Videodisc/Optical Disk Magazine
    • Video Computing

External links

Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Electronic tuner — Pocket sized Korg chromatic LCD tuner, with simulated analog indicator needle The term electronic tuner can refer to a number of different things, depending which discipline you wish to study. In the Discipline of radio frequency electronics an… …   Wikipedia

  • Capacitance — Electromagnetism Electricity · …   Wikipedia

  • Видеодиск — Видеодиск  общее определение носителей информации в форме диска, который используется для сохранения видеосигнала и звукового сопровождения с целью последующего воспроизведения записанного материала. Особенностью системы воспроизведения… …   Википедия

  • Caddy (hardware) — For hard disk drive caddies, see disk enclosure. In computer hardware, a caddy refers to a sheath used to hold some media. If the medium is a hard disk drive, the caddy is also referred to as a disk enclosure, which is discussed there. It also… …   Wikipedia

  • Data storage device — Many different consumer electronic devices can store data …   Wikipedia

  • VHS — Infobox media name = Video Home System | caption = Top view of VHS cassette with ruler for scale type = Video recording media encoding = FM on magnetic tape common lengths = 120, 160 minutes (Standard Play Mode) unusual lengths = 5, 10, 15, 30,… …   Wikipedia

  • Unusual types of gramophone records — The overwhelming majority of records manufactured have been of certain sizes (7, 10, or 12 inches), playback speeds (33⅓, 45, or 78 RPM), and appearance (round black discs). However, since the commercial adoption of the gramophone record, a… …   Wikipedia

  • Star Wars Episode V: The Empire Strikes Back — For other uses, see The Empire Strikes Back (disambiguation). Star Wars Episode V: The Empire Strikes Back Theatrical poster by Roger Kastel[1] …   Wikipedia

  • PHOTOGRAPHIE — La perception de l’apparence du monde matériel par notre organe visuel a comme support la lumière visible ou les autres radiations électromagnétiques, rendues visibles par l’intermédiaire de phénomènes auxiliaires. L’emploi direct de l’ensemble… …   Encyclopédie Universelle

  • Videotape format war — The videotape format war was a period of intense competition or format war of incompatible models of video cassette recorders (VCR) in the late 1970s and the 1980s. It has gone down in marketing history as a classic example of technological… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”