Environmental impact statement

Environmental impact statement
This article refers to environmental impact statements under United States federal law. For worldwide perspective on environmental impact statements, see Environmental impact assessment.

An environmental impact statement (EIS), under United States environmental law, is a document required by the National Environmental Policy Act (NEPA) for certain actions "significantly affecting the quality of the human environment".[1] An EIS is a tool for decision making. It describes the positive and negative environmental effects of a proposed action, and it usually also lists one or more alternative actions that may be chosen instead of the action described in the EIS. Several US state governments require that a document similar to an EIS be submitted to the state for certain actions. For example, in California, an Environmental Impact Report (EIR) must be submitted to the state for certain actions, as described in the California Environmental Quality Act (CEQA).



The purpose of NEPA is to promote informed decision-making by federal agencies by making "detailed information concerning significant environmental impacts" available to both agency leaders and the public.[2] The NEPA was the first piece of legislation that created a comprehensive method to assess potential and existing environmental risks at once. One of the primary authors of the act was Lynton K. Caldwell. It also encourages communication and cooperation between all the actors involved in environmental decisions, including government officials, private businesses, and citizens.[3]

In particular, an EIS acts as an enforcement mechanism to ensure that the federal government adheres to the goals and policies outlined in the NEPA. An EIS should be created in a timely manner as soon as the agency is planning development or is presented with a proposal for development. The statement should use an interdisciplinary approach so that it accurately assesses both the physical and social impacts of the proposed development.[4]

Not all federal actions require a full EIS. If the action may or may not cause a significant impact the agency can first prepare a smaller, shorter document called an Environmental Assessment (EA). The finding of the EA determines whether an EIS is required. If the EA indicates that no significant impact is likely, then the agency can release a finding of no significant impact (FONSI) and carry on with the proposed action. Otherwise, the agency must then conduct a full-scale EIS. Most EAs result in a FONSI. A limited number of federal actions may avoid the EA and EIS requirements under NEPA if they meet the criteria for a categorical exclusion (CATEX). A CATEX is usually permitted when a course of action is identical or very similar to a past course of action and the impacts on the environment from the previous action can be assumed for the proposed action, or for building a structure within the footprint of an existing, larger facility or complex. For example, two proposed sections of Interstate 69 in Kentucky were granted a CATEX from NEPA requirements as these portions of I-69 will be routed over existing freeways requiring little more than minor spot improvements and a change of highway signage. Additionally, a CATEX can be issued during an emergency situation when time does not permit the preparation of an EA or EIS. An example of the latter is when the Federal Highway Administration issued a CATEX to construct the replacement bridge in the wake of the I-35W Mississippi River Bridge Collapse.

Contrary to a widespread misconception, NEPA does not prohibit the federal government or its licensees/permittees from harming the environment, but merely requires that the prospective impacts be understood and disclosed in advance. The intent of NEPA is to help key decisionmakers and stakeholders balance the need to implement an action with its impacts on the surrounding human and natural environment, and provide opportunities for mitigating those impacts while keeping the cost and schedule for implementing the action under control. However, many activities require various federal permits to comply with other environmental legislation, such as the Clean Air Act, the Clean Water Act, Endangered Species Act and Section 4(f) of the Federal Highway Act to name a few. Similarly, many states and local jurisdictions have enacted environmental laws and ordinances, requiring additional state and local permits before the action can proceed. Obtaining these permits typically requires the lead agency to implement the Least Environmentally Damaging Practicable Alternative (LEDPA) to comply with federal, state, and local environmental laws that are ancillary to NEPA.


An EIS typically has four sections:

  • An Introduction including a statement of the Purpose and Need of the Proposed Action.
  • A description of the Affected Environment.
  • A Range of Alternatives to the proposed action. Alternatives are considered the "heart" of the EIS.
  • An analysis of the environmental impacts of each of the possible alternatives. This section covers topics such as:
  • Impacts to threatened or endangered species
  • Air and water quality impacts
  • Impacts to historic and cultural sites, (particularly sites of significant importance to Native American tribes)
  • Social and Economic impacts to local communities
  • Cost analysis for each alternative, including costs to mitigate expected impacts, to determine if the proposed action is a prudent use of taxpayer dollars

While not required in the EIS, the following subjects may be included as part of the EIS or as separate documents based on agency policy.

  • Financial Plan for the proposed action identifying the sources of secured funding for the action. For example, the Federal Highway Administration has started requiring states to include a financial plan showing that funding has been secured for major highway projects before it will approve an EIS and issue a Record of Decision.
  • An Environmental Mitigation Plan is often requested by the Environmental Protection Agency (EPA) if substantial environmental impacts are expected from the preferred alternative.
  • Additional documentation to comply with state and local environmental policy laws and secure required federal, state, and local permits before the action can proceed.

Every EIS is required to analyze a No Action Alternative, in addition to the range of alternatives presented for study. The No Action Alternative identifies the expected environmental impacts in the future if existing conditions were left as is with no action taken by the lead agency. Analysis of the No Action Alternative is used to establish a baseline upon which to compare the proposed "Action" alternatives.

NEPA process

The NEPA process is designed to involve the public and gather the best available information in a single place so that decision makers can be fully informed when they make their choices.

The process has the following steps:

  • Proposal: In this stage, the needs and objectives of a project have been decided, but the project has not been financed.
  • Categorical Exclusion (CATEX): As discussed above, the government may exempt an agency from the process. The agency can then proceed with the project and skip the remaining steps.
  • Environmental Assessment (EA): The proposal is analyzed in addition to the local environment with the aim to reduce the negative impacts of the development on the area.[3]
  • Finding of No Significant Impact (FONSI): Occurs when no significant impacts are identified in an EA. A FONSI typically allows the lead agency to proceed without having to complete an EIS.

Environmental Impact Statement

  • Scoping: The first meetings are held to discuss existing laws, the available information, and the research needed. The tasks are divided up and a lead group is selected. Decision makers and all those involved with the project can attend the meetings.[3]
  • Notice: The public is notified that the agency is preparing an EIS. The agency also provides the public with information regarding how they can become involved in the process.[3] The agency announces its project proposal with a notice in the Federal Register, notices in local media, and letters to citizens and groups that it knows are likely to be interested. Citizens and groups are welcome to send in comments helping the agency identify the issues it must address in the EIS (or EA).
  • Draft EIS (DEIS): Based on both agency expertise and issues raised by the public the agency prepares a Draft EIS with a full description of the affected environment, a reasonable range of alternatives, and an analysis of the impacts of each alternative.
  • Comment: Affected individuals then have the opportunity to provide feedback through written and public hearing statements.[3]
  • Final EIS (FEIS) and Proposed Action: Based on the comments on the Draft EIS, the agency writes a Final EIS, and announces its Proposed Action. The public is not invited to comment on this, but if they are still unhappy, or feel that the agency has missed a major issue, they may protest the EIS to the Director of the agency. The Director may either ask the agency to revise the EIS, or explain to the protester why their complaints are not actually taken care of.
  • Re-evaluation: Prepared following an approved FEIS or ROD when unforeseen changes to the proposed action or its impacts occurs, or when a substantial period of time has passed between approval of an action and the planned start of said action. Based on the significance of the changes, three outcomes may result from a re-evaluation report: (1) the action may proceed with no substantive changes to the FEIS, (2) significant impacts are expected with the change that can be adequately addressed in a Supplemental EIS (SEIS), or (3) the circumstances force a complete change in the nature and scope of the proposed action, thereby voiding the pre-existing FEIS (and ROD, if applicable), requiring the lead agency to restart the NEPA process and prepare a new EIS to encompass the changes.
  • Supplemental EIS (SEIS): Typically prepared after either a Final EIS or Record of Decision has been issued and new environmental impacts that were not considered in the original EIS are discovered, requiring the lead agency to re-evaluate its initial decision and consider new alternatives to avoid or mitigate the new impacts. Supplemental EISs are also prepared when the size and scope of a federal action changes, when a significant period of time has lapsed since the FEIS was completed to account for changes in the surrounding environment during that time, or when all of the proposed alternatives in an EIS are deemed to have unacceptable environmental impacts and new alternatives are proposed.
  • Record of Decision (ROD): Once all the protests are resolved the agency issues a Record of Decision which is its final action prior to implementation. If members of the public are still dissatisfied with the outcome, they may sue the agency in Federal court.

Often, the agencies responsible for preparing an EA or EIS do not compile the document directly, but outsource this work to private-sector consulting firms with expertise in the proposed action and its anticipated effects on the environment. Because of the intense level of detail required in analyzing the alternatives presented in an EIS or EA, such documents may take years or even decades to compile, and often compose of multiple volumes that can be thousands to tens of thousands of pages in length.

To avoid potential conflicts in securing required permits and approvals after the ROD is issued, the lead agency will often coordinate with stakeholders at all levels, and resolve any conflicts to the greatest extent possible during the EIS process. Proceeding in ths fashion helps avoid interagency conflicts and potential lawsuits after the lead agency reaches its decision.


On exceptionally large projects, especially proposed highway and railroad corridors that cross long distances, the lead agency may use a two-tiered process prior to implemeting the proposed action. In such cases, the Tier I EIS would analyze the potential socio-environmental impacts along a general corridor, but would not identify the exact location of where the action would occur. A Tier I ROD would be issued approving the general area where the action would be implemented. Following the Tier I ROD, the approved Tier I area is further broken down into subareas, and a Tier II EIS is then prepared for each subarea, that identifies the exact location of where the proposed action will take place. The preparation of Tier II EISs for each subarea proceeds at its own pace, independent from the other subareas within the Tier I area. For example, parts of the proposed Interstate 69 extension in Indiana and Texas are being studied through a two-tiered process.


By requiring agencies to complete an EIS, the act encourages them to consider the environmental costs of a project and introduces new information into the decision-making process. The NEPA has increased the influence of environmental analysts and agencies in the federal government by increasing their involvement in the development process. Because an EIS requires expert skill and knowledge, agencies must hire environmental analysts. Unlike agencies who may have other priorities, analysts are often sympathetic to environmental issues. In addition, this feature introduces scientific procedures into the political process.[5]


The differences that exist between science and politics limit the accuracy of an EIS. Although analysts are members of the scientific community, they are affected by the political atmosphere. Analysts do not have the luxury of an unlimited time for research. They are also affected by the different motives behind the research of the EIS and by different perspectives of what constitutes a good analysis. In addition, government officials do not want to reveal an environmental problem from within their own agency.[5]

Citizens often misunderstand the environmental assessment process. The public does not realize that the process is only meant to gather information relevant to the decision. Even if the statement predicts negative impacts of the project, decision makers can still proceed with the proposal.[3]

Environmental impact statements presented to citizens and government officials frequently include very precise data. However, the quality and context of the data, such as the margin of error and the range, is omitted.[3]

See also


  1. ^ The National Environmental Policy Act of 1969, as amended, 42 USC Sections 4321-4347 (enacted 1970-01-01) from Council on Envrionmental Quality NEPAnet
  2. ^ See the Supreme Court decision: Robertson v. Methow Valley Citizens Council, 490 U.S. 332, 349 (1989).
  3. ^ a b c d e f g Felleman, John (August 26, 2008), "Environmental Impact Assessment", The Encyclopedia of Earth, http://www.eoearth.org/article/Environmental_Impact_Assessment 
  4. ^ "Part 1502--Environmental Impact Statement". U.S. Council on Environmental Quality. http://ceq.hss.doe.gov/Nepa/regs/ceq/1502.htm. 
  5. ^ a b Taylor, Serge. 1984. "Making Bureaucracies Think: The Environmental Impact Statement Strategy of Administrative Reform". Stanford University Press: Stanford, CA.

External links

Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Environmental Impact Statement — environmental im·pact statement n: a technical report that details the effect proposed legislation or action will have on the natural and human environment and that is sometimes required to be furnished esp. by a governmental body (as an… …   Law dictionary

  • environmental impact statement — ➔ statement * * * environmental impact statement UK US noun [C] (ABBREVIATION EIS) ENVIRONMENT, GOVERNMENT ► in the US, a report to the government on the possible effects on the environment of a large project, such as a road or industrial… …   Financial and business terms

  • environmental impact statement — environmental impact statement, a review of the possible consequences that a proposed idea or project may have on the environment: »To block a…low income housg project by bringing a long series of challenges to the project s environmental impact… …   Useful english dictionary

  • environmental impact statement — noun (in Australia) a formal document presenting (usually for public review) the findings of studies undertaken to analyse and predict the likely environmental impacts of a proposed development or change in land use, and also presenting the… …  

  • Environmental impact statement —   A report that documents the information required to evaluate the environmental impact of a project. It informs decision makers and the public of the reasonable alternatives that would avoid or minimize adverse impacts or enhance the quality of… …   Energy terms

  • environmental impact statement — (EIS)  Government document evaluating the environmental impact of a proposed project or policy. Environmentalists have often insisted that government agencies produce a full EIS as a way to stall a program or project that they oppose …   American business jargon

  • Environmental Impact Statement — A report addressing the potential effects on the environment of a proposed federal government project. These statements are required by Section 102(2) (C) of the National Environmental Policy Act of 1969 and are reviewed by the Environmental… …   Investment dictionary

  • Environmental Impact Statement — a document prepared to describe the effects of proposed activities (such as implementation of a fisheries management plan) on the environment. Impacts can be positive or negative or both and the document may also describe ways to mitigate impacts …   Dictionary of ichthyology

  • Environmental impact of oil shale industry — includes the consideration of issues such as land use, waste management, and water and air pollution. Surface mining of oil shale deposits has all the environmental impacts of open pit mining. In addition, the combustion and thermal processing… …   Wikipedia

  • Environmental impact assessment — Environmental law …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”