This article is about the digital voice mode used in amateur radio. For the physical quantity, see Specific detectivity. For the concept in robotics, see D* search algorithm.For more details on this topic, see List of amateur radio modes.
D-STAR (Digital Smart Technologies for Amateur Radio) is a digital voice and data protocol specification developed as the result of research by the Japan Amateur Radio League to investigate digital technologies for amateur radio. While there are other digital on-air technologies being used by amateurs that have come from other services, D-Star is one of the first on-air and packet-based standards to be widely deployed and sold by a major radio manufacturer that is designed specifically for amateur service use.
Other non-digital voice modes such as amplitude modulation, frequency modulation, and single sideband have been widely used since the first half of the 20th century. By comparison, digital D-STAR signals offer clearer signals and use less bandwidth than their non-digital counterparts. As long as the signal strength is above a minimum threshold, and no multi-path is occurring, the quality of the data received is better than an analog signal at the same strength.
D-Star compatible radios are available on VHF, UHF, and microwave amateur radio bands. In addition to the over-the-air protocol, D-Star also provides specifications for network connectivity, enabling D-Star radios to be connected to the Internet or other networks and provisions for routing data streams of voice or packet data via amateur radio callsigns.
The first manufacturer to offer D-Star compatible radios is Icom. As of July 06, 2011, no other amateur radio equipment manufacturer has chosen to include D-Star technology in their radios. The technology requires the use of a proprietary AMBE Codec that is owned by Digital Voice Systems, Inc. and is only licensed to Icom at this time.
- 1 History
- 2 Technical details
- 3 D-RATS
- 4 Criticisms
- 5 A non-Icom D-Star repeater
- 6 Compatible programs and projects
- 7 Home-brew D-Star radio
- 8 Equipment
- 9 See also
- 10 References
- 11 Journal
- 12 External links
In 1999 an investigation was put into finding a new way of bringing digital technology to amateur radio. The process was funded by the Japanese government and administered by the Japan Amateur Radio League. In 2001, D-Star was published as the result of the research and Icom entered the construction of the new digital technology by offering the hardware necessary to create this technology.
In September 2003 Icom named Matt Yellen, KB7TSE (now K7DN), to lead its US D-Star development program.
Starting in April 2004 Icom began releasing new "D-Star optional" hardware. The first to be released commercially was a 2-meter mobile unit designated IC-2200H. Icom followed up with 2 meter and 440Mhz handheld transceivers the next year. However, the yet to be released UT-118 add-on card was required for these radios to operate in D-Star mode. Eventually Icom began selling the card and once installed into the radios it provided D-Star connectivity for each of the transceivers. The June 2005 edition of the ARRL's QST magazine reviewed the Icom IC-V82.
JARL released significant changes to the existing D-Star standard in late 2004. Icom, aware that the changes were coming, had placed the release of their hardware on hold for a period of as much as a year while they awaited the changes. As soon as the changes were out, Icom announced they would be able to finish up and release equipment.
The Icom ID-1 1.2 GHz mobile radio was released in late 2004. This was to have been the first D-Star radio, providing full Digital Data (DD) functionality.
The first D-Star over satellite QSO occurred between Michael, N3UC, FM-18 in Haymarket, Virginia and Robin, AA4RC, EM-73 in Atlanta, Georgia while working AMSAT's AO-27 microsatellite (Miniaturized satellite) in 2007. The two operators used a variety of Icom gear to make the contact and experienced slight difficulty with doppler shift during the QSO.
As of late 2009 there are around 10,800 D-Star users talking through D-Star repeaters which have connectivity to the Internet via the G2 Gateway. There are around 550 G2 enabled repeaters now active. Note, these numbers do not include the scores of users with D-Star capabilities but not within range of a repeater, or working through D-Star repeaters that do not have Internet connectivity.
The first D-Star capable microsatellite is scheduled for launch during early 2012. OUFTI-1 is a CubeSat and is built by Belgian students at the University of Liège and I.S.I.L (Haute École de la Province de Liège). The name is an acronym for Orbital Utility For Telecommunication Innovation. The goal of the project is to develop experience in the different aspects of satellite design and operation. The satellite weighs just 1 kilogram and will utilize a UHF uplink and a VHF downlink.
The system today is capable of linking repeaters together locally and through the Internet utilizing callsigns for routing of traffic. Servers are linked via TCP/IP utilizing proprietary "gateway" software, available from Icom. This allows amateur radio operators to talk to any other amateur participating in a particular gateway "trust" environment. The current master gateway in the United States is operated by the K5TIT group in Texas, who were the first to install a D-Star repeater system in the U.S.
D-STAR transfers both voice and data via digital encoding over the 2 m (VHF), 70 cm (UHF), and 23 cm (1.2 GHz) amateur radio bands. There is also an interlinking radio system for creating links between systems in a local area on 10 GHz, which is valuable to allow emergency communications oriented networks to continue to link in the event of internet access failure or overload.
Within the D-Star Digital Voice protocol standards (DV), voice audio is encoded as a 3600 bit/s data stream using proprietary AMBE encoding, with 1200 bit/s FEC, leaving 1200 bit/s for an additional data "path" between radios utilizing DV mode. On air bit rates for DV mode are 4800 bit/s over the 2 m, 70 cm and 23 cm bands.
In addition to DV mode, a high speed Digital Data (DD) mode can be sent at 128 kbit/s only on the 23 cm band. A higher-rate proprietary data protocol, currently believed to be much like ATM, is used in the 10 GHz "link" radios for site-to-site links.
Radios providing DV data service within the low-speed voice protocol variant typically use an RS-232 or USB connection for low speed data (1200 bit/s), while the Icom ID-1 23 cm band radio offers a standard Ethernet connection for high speed (128 kbit/s) connections, to allow easy interfacing with computer equipment.
The current gateway control software rs-rp2c version 2.0, more commonly called "Gateway 2.0", runs on virtually any distribution of Linux, but the Icom-supported and -recommended configuration is CentOS 5.1 on a Pentium IV 2.4 GHz or faster machine.
The recommended configuration uses Linux CentOS 5.1 with the latest updates, typically running (kernel 2.4.20. glibc 2.3.2 and BIND 9.2.1 or later). The CPU should be 2.4 GHz or faster and the memory should at least be 512 MB or greater. There should be two network interface cards and at least 10 GB free of hard drive space which includes the OS install. Finally for middleware, Apache 2.0.59, Tomcat 5.5.20, mod_jk2 2.0.4, OpenSSL 0.9.8d, Java SE 5.0 and postgreSQL 8.2.3 are utilized, but these can be different as updates occur.
Along with the open-source tools, the Icom proprietary dsipsvd or "D-Star IP Service Daemon" and a variety of crontab entries utilize a mixture of the local PostgreSQL and BIND servers to look up callsigns and "pcname" fields (stored in BIND) which are mapped to individual 10.x.x.x internal-only addresses for routing of both voice and data traffic between participating gateways.
During installation, the Gateway 2.0 software installation script builds most of the Web-based open-source tools from source for standardization purposes, while utilizing some of the packages of the host Linux OS, thus making CentOS 5.1 the common way to deploy a system, to keep incompatibilities from occurring in both package versions and configuration.
Additionally, gateways operating on the U.S. trust server are asked during initial setup to install DStarMonitor which is an add-on tool that allows the overall system administrators to see the status of each Gateway's local clock and other processes and PIDs needed for normal system operation, and also sends traffic and other data to servers operated under the domain name of "dstarusers.org". By this means a complete tracking of user behaviour is technically possible. Installation of this software also includes JavaAPRSd, a Java-based APRS interface which is utilized on Gateway 2.0 systems to interface between the Icom/D-Star GPS tracking system called DPRS to the more widely known and utilized amateur radio APRS system.
How Gateway 2.0 works
Each participating amateur station wanting to use repeaters/gateways attached to a particular trust server domain must "register" with a gateway as their "home" system, which also populates their information into the trust server—a specialized central gateway system—which allows for lookups across a particular trust server domain. Only one "registration" per trust domain is required. Each amateur is set aside eight 10.x.x.x internal IP addresses for use with their callsign or radios, and various naming conventions are available to utilize these addresses if needed for specialized callsign routing. Most amateurs will need only a handful of these "registered" IP addresses, because the system maps these to callsigns, and the callsign can be entered into multiple radios.
The gateway machine controls two network interface controllers, the "external" one being on a real 10.x.x.x network behind a router. A router that can perform network address translation on a single public IP address (can be static or dynamic in Gateway 2.0 systems) to a full 10.x.x.x/8 network is required. From there, the Gateway has another NIC connected directly to the D-Star repeater controller via 10BaseT and the typical configuration is a 172.16.x.x (/24) pair of addresses between the gateway and the controller.
Differences between Gateway 1.0 and 2.0
The main differences between Gateway 1.0 and 2.0 are the addition of a relational database (PostgreSQL) for more flexibility and control of updates, versus the previous use of only BIND for "database" activities, the addition of both an administrative and end-user Web interface for registration which was previously handled via command-line commands by the Gateway 1.0 system administrators, dropping the requirement for static public IP addresses for gateways, and the ability of the software to use a fully qualified domain name to find and communicate with the trust server, allowing for redundancy/failover options for the trust server administrators. Finally, a feature called "multicast" has been added for administrators to be able to provide users with a special "name" they can route calls to which will send their transmissions to up to ten other D-Star repeaters at the same time. With cooperation between administrators a "multicast group" can be created for multiple repeater networks or other events.
Another additional feature of Gateway 2.0 is the ability to use callsign "suffixes" appended to the user's callsign in a similar fashion to the repeaters and gateways in the original system, which allow for direct routing to a particular user's radio or between two user radios with the same base callsign, by utilizing the 8th most significant field of the callsign and adding a letter to that location, both in the gateway registration process on the web interface, and in the radios themselves.
Gateway 1.0 control software
The Gateway 1.0 software was similar to Gateway 2.0, and utilized Fedora Core 2+ or Red Hat Linux 9+ OS on a Pentium-grade 2.4 GHz or faster machine.
Various projects exist for gateway administrators to add "add-on" software to their gateways, including the most popular package called "dplus" created by Robin Cutshaw AA4RC. A large number of Gateway 2.0 systems are offering services added by this software package to their end-users, and users are getting used to having these features. Features include the ability to link systems directly, "voice mail" (a single inbox today), ability to play/record audio to and from the repeaters connected to the Gateway and the most important, the ability for DV-Dongle users to communicate from the Internet to the radio users on the repeaters.
There is often a misconception by users and system administrators alike that the Gateway 2.0 systems have these add-on features from dplus by default, a testament to the popularity of this add-on software. Software development on dplus is very active right now, and features such as multiple repeater/system connections similar to the type of linking done by other popular repeater-linking systems (IRLP and EchoLink) are being worked on.
D-RATSSee also: Amateur Radio Emergency Service
Another aspect of D-STAR technology is its ability to send large quantities of data to emergency responders in the event of a disaster. Served agencies can relate to sending e-mail or Microsoft Word files to someone. The quantity of data sent can be high-volume compared to traditional amateur modes. Voice and even CW are capable of getting a message through albeit slowly, but D-STAR can transfer documents, images, and spreadsheets in reasonable time periods.
D-RATS is a D-STAR communications tool that supports text chat, TCP/IP forwarding, file transfers, and can act as an e-mail gateway. There is also the ability to map user's positions using the D’PRS function of D-STAR. The application is written in Python/GTK and is cross-platform. It runs on Windows, Mac OS X, and Linux. The application was developed by Dan Smith (KK7DS) for the Washington County Amateur Radio Emergency Service in Oregon.
It was in the Great Coastal Gale of 2007 the Washington County ARES group was able to test D-STAR during this series of several strong Pacific storms that interrupted conventional communication systems for up to one week. Primary emergency traffic for the American Red Cross and the Vernonia, Oregon Fire Department was handled by the group using traditional FM voice because the group had no D-STAR repeater equipment available. Once the situation's communication needs became established the D*Chat communication tool was used to send small text transmissions via D-STAR simplex at distances of up to seventeen miles.
An ability for amateurs to send files during this weather event would have greatly increased the capacity for ARES to help during the emergency. Although D*Chat was a useful means of communication D-RATS was developed to help fill the gaps that may have been lacking. Another improvement over D*Chat that D-RATS provides is form support. Users can set up frequently used forms well before they're necessary and when the need comes all that's required is to fill in the fields. In this way, for example, emergency forms from the Red Cross, National Traffic System, or the Incident Command System, such as the FEMA standard ICS-213, can be generated and quickly sent.
- Proprietary codec
D-STAR uses a patented, closed-source proprietary voice codec (AMBE). Hams do not have access to the detailed specification of this codec or the rights to implement it on their own without buying a licensed product. Hams have a long tradition of building, improving upon and experimenting with their own radio designs. The modern digital age equivalent of this would be designing and/or implementing codecs in software. Critics say the proprietary nature of AMBE and its availability only in hardware form (as ICs) discourages innovation. Even critics praise the openness of the rest of the D-STAR standard which can be implemented freely. An open-source replacement for the AMBE codec would resolve this issue.
Bruce Perens, K6BP, amateur radio and open source advocate, evangelized the need for an open source codec for amateur radio. David Rowe, VK5DGR, has implemented an Alpha-test replacement codec under the LGPL and is continuing in its development.
- Trademarked name
Despite many protestations from the Pro-D-Star lobby that the standard was developed by the JARL, and D-Star is not only an Icom system, the term 'D-Star' is itself a registered trademark of Icom.
- Usable range compared to FM
D-STAR has comparable usable range to FM but degrades differently. While the quality of FM progressively degrades the further a user moves away from the source, D-Star maintains a constant voice quality up to a point, then essentially "falls off a cliff". This behavior is inherent in any digital data system, and demonstrates the threshold at which the signal is no longer correctable.
- Emergency Communications Concerns
D-Star's performance envelope relies heavily on internet connections. During widespread disasters that compromise commercial telecommunications infrastructure, D-Star systems (and other modes that rely on the internet such as WinLink) may suffer outages or performance degradation that severely impacts operations. Without simulating such outages during drills, it is difficult to assess the impact or establish D-Star service recovery procedures. As of the fall of 2011, there has been almost no discussion in the ham radio literature regarding actual drills where D-Star systems were tested with failed or even intermittent telecommunications infrastructure. Comprehensive emergency communications plans used by ARES and other such organizations should address the possibility that such systems may not function as intended during major disasters.
D-STAR does add to the cost of a radio and is a barrier to the adoption of the technology. In 2006 the cost of a D-STAR radio was compared to that of a standard analog radio and the price difference was nearly double. This is due partly to the per-unit cost for the voice codec hardware and/or license, and partly to manufacturer research and development costs that need to be amortized. As is the case with any product, as more units are sold the R&D portion of the cost will decrease over time. The D-Star capable radios also cost most than their equivalents from other brands, even before the D-Star options boards are added (in the UK as of April 2011, Martin Lynch & Sons' website lists the Icom 2820 (without D-Star) at £489, while the equivalent Yaesu, the FT8800, is listed at just £337).
- Other available digital standards
Amateur radio operators have been using the more widely available Project 25 (P25) standard for some time and that digital mode offers features that are comparable to DSTAR. P25 was developed by the Association of Public-Safety Communications Officials-International for use by federal, state/province and local public safety agencies, and has been around since 1995. The P25 suite of standards is firmly established and has proven itself in multiple public service agencies. Equipment is available from multiple manufacturers rather than from just one with DSTAR. A drawback is that P25 is not manufactured for amateur use and commercial grade equipment must be used, and the cost of commercial radios that employ the P25 technology were even more expensive than that of off-the-shelf D-STAR radios. However, as of mid-2011, there is an ample supply of used P25 equipment at prices comparable to or less than that of new, mid-range ham gear. Motorola Astro Saber and Astro Spectra P25 transceivers can be found on eBay for $200 or less, well below the price of D-STAR equipment.
In addition, there are small pockets of amateurs in Europe experimenting with TETRA on the 70cm band. However, the largest growth as of June 2011 was seen in Digital Mobile Radio and specifically Motorola's DMR product called MOTOTRBO. DMR is manufactured by nearly a half dozen manufacturers including Motorola. Since DMR is a worldwide standard, the radios from different manufacturers are interoperable on almost all features. DMR offers 2 digital voice channels from one repeater in 12.5 kHz channel bandwidth (also referred to as "6.25 equivalent").
- Questionable legality
Many anti D-Star amateurs have argued that the proprietary codec constitutes a form of encryption, which is prohibited by almost every country's amateur radio licence conditions. For the most part, regulators have ignored these claims, and allowed unbridled D-Star use as with any other mode. However, the French regulators, in April 2010, have issued a statement that rules D-Star illegal in France, due to the ability to create a connection to the internet with it, and because the codec used is proprietary. The French Amateur Radio society, Réseau des Émetteurs Français have an online petition against this ruling, calling for the government to allow the mode as to ban it would deny them 'fundamental rights'
A non-Icom D-Star repeater
The world's first non-Icom D-Star repeater GB7MH, fully linked to the K5TIT G2 network and D-Plus, went live on 10 September 2009, in West Sussex, England. Whilst waiting for the DSL line installation, the repeater is connected to the Internet via a 3G dongle from network operator "Three". The system is built around Satoshi Yasuda's GMSK Node Adapter, a Mini-ITX system running CentOS 4, a Tait T800 repeater and G2 code written by G4ULF. All the usual G2 features such as callsign routing, D-Plus linkage and DPRS via D-Star Monitor are supported.
Compatible programs and projects
A Web-based text messaging application using D-Star digital data technology.
D-StarLet is an open source client-server solution that allows content creation and modification from certain persons. D-StarLet interfaces with a D-Star radio through the serial port. It works with Windows (98+), Linux (Red Hat 7.3+), Apple Mac OS X, and others.
- D-PRS interface
D-PRS is GPS for ham radio. Includes DStarTNC2, javAPRSSrvr, DStarInterface, and TNC-X
A Java application run on the repeater gateway PC which logs activity on the attached repeaters. Additional features include APRS object representation of each repeater.
DStarQuery monitors the low-speed data stream of a D-STAR radio looking for queries sent from a remote station. When a valid query is received, a predefined sequence is executed and the results transmitted from the station running DStarQuery. For example, a station transmits "?D*rptrs?" and it is received by a DStarQuery station which responds with a list of local repeaters.
The program D-PRS Interface includes a "Query" entry field that streamlines this process allowing the user to simply enter the desired command. Most DStarQuery systems will respond with a list of available commands when "?D*info?" is received.
- Dstar Comms PRO
An advanced software application for use with DStar enabled radios. Supports advanced text chat, personal messaging with auto-reply and inbox, e-mail gateway and a beacon mode. GPS Tracking / Logging and a GPS Beacon emulator and Internet linking. New features are added weekly and users can suggest new features through the Dstar Comms forum. www.dstarcomms.com
- DStar TV
Slow Scan TV for DStar radios and video streaming for Icom ID-1 by GM7HHB. Runs on Windows XP and Vista.
Home-brew D-Star radioSee also: Amateur radio homebrew
The first presumed D-Star radio including pictures and diagrams can be found at Moetronix.com's Digital Voice Transceiver Project. This page includes the schematic, source, and whitepaper.
Another project is Satoshi Yasuda's (7M3TJZ/AD6GZ) experiments with a UT-118 DV adapter. This project involves interfacing Icom's UT-118 with other manufacturer's amateur radio tranceivers. With this project some VHF/UHF/SHF amateur radio tranceivers are capable of being adapted for D-STAR operation. This requires access to the receiver's discriminator and to the direct FM modulator of the radio, sometimes available at a 9600 bit/s packet interface. Satoshi's product is no longer available. There is an alternative available at www.dutch-star.nl
Antoni Navarro (EA3CNO) also has designed another interface based on a PIC microprocessor and UT-118 module.
- Repeater equipment:
- GMSK Node Adapter - these devices are hardware GMSK modems with firmware to take D-STAR protocol frames over a USB cable and provide the necessary logic and GMSK modulation to control a simplex node or a full duplex repeater. One repeater that is easily adaptable is the Kenwood TKR-820 as documented by K7VE.
- GMSK using a sound card - this method uses a computer sound card to generate GMSK modulation and de-modulation. The primary software for this method is developed by Jonathan Naylor.
- Repeater equipment:
- Icom D-STAR equipment
- Transceivers—D-STAR and Analog FM Capable:
- Icom ID-1: 23 cm digital voice and digital data mobile transceiver. Power is selectable at 1 W or 10 W. USB control port and Ethernet connection for data.
- Icom IC-2820H/IC-E2820: 2 m / 70 cm twin band digital voice mobile transceiver. Power up to 50 W on each band. May be purchased with or without D-STAR module. The D-STAR module includes a built-in GPS receiver with accompanying antenna.
- Icom ID-800H: 2 m / 70 cm dual band digital voice mobile transceiver. Power up to 55 W on 2 m and 50 W on 70 cm.
- Icom ID-880H: 3rd gen 2 m / 70 cm digital voice mobile transceiver (50W).
- Icom IC-80AD: 3rd gen 2m / 70 cm digital voice hand held transceiver (5W).
- Icom IC-92AD: 2 m / 70 cm twin band digital voice hand held transceiver. Four power settings up to 5 W on each band. Rugged and submersible design, optional microphone with embedded GPS.
- Icom IC-91AD/IC-E91 + D-STAR: 2 m / 70 cm twin band digital voice hand held transceiver. Power is selectable at 0.5 W or 5 W on each band.
- Icom IC-2200H: 2 m single band digital voice mobile transceiver. Power up to 65 W. Must purchase optional D-STAR module.
- Icom IC-V82: 2 m single band digital voice hand held transceiver. Power up to 7 W. Must purchase optional D-STAR module.
- Icom IC-U82: 70 cm single band digital voice hand held transceiver. Power up to 5 W. Must purchase optional D-STAR module.
- Repeater equipment:
- Icom ID-RP2000V: 2 m digital voice repeater.
- Icom ID-RP4000V: 70 cm digital voice repeater.
- Icom ID-RP2V: 23 cm digital voice repeater.
- Icom ID-RP2D: 23 cm digital data access point.
- Icom ID-RP2C: Repeater controller. Can support up to four digital voice repeaters and digital data access points. Required to operate any Icom D-STAR digital voice repeater or digital data access point.
- Transceivers—D-STAR and Analog FM Capable:
- Inet Labs
- Computer accessory:
- DV-Dongle: The dongle is a USB device with the AMBE codec built in. Amateurs can use this with a personal computer which can be used to generate D-STAR packets over the Internet. This is a good option for experiencing D-STAR if there isn't a local D-STAR repeater or if there is a repeater but it's not associated with an Internet gateway. The dongle works along with the DVTOOL software which is a java-based application that mimics the controls on a D-STAR radio, although the interface doesn't actually look like a radio panel. A non-java based executable is also now available in beta form for windows based platforms. Note: Now available from a number of amateur radio dealers or by homebrew using documentation at Moetronix.
- DV-AP: A DVAP Dongle is a unit which plugs into a computer and uses functionality similar to the DV Dongle to connect to the D-STAR network across the Internet. The AP (Access Point) bit is because the device also has a 10 mW transmitter built in. The Access Point is set to a particular frequency and then it can used with a D-STAR handheld around the house or the near vicinity of the access point
- Computer accessory:
- Kenwood D-STAR equipment
- Kenwood TMW-706S: 2 m / 70 cm dual band digital voice mobile transceiver. Power up to 50 W.
- Kenwood TMW-706: 2 m / 70 cm dual band digital voice mobile transceiver. Power up to 20 W.
- Note: These transceivers are not available in North America and appear to be OEM versions of the Icom ID-800H
Manufacturers of D-STAR equipment Manufacturer Radio(s) Repeater(s) More Information Icom Yes Yes (ID-1, ID-800H, ID-880H, IC-2200H, IC-2820H, IC-80D, IC-91AD, IC-92AD, ID-RP200V, ID-RP400V) Kenwood Yes Yes (Kenwood "re-badges" an Icom radio in Japan which is not for sale outside Japan.) Moetronix DV Dongle & DVAP No (Available through multiple amateur radio dealers.) MicroWalt Corporation DUTCH*Star Mini Hotspot & Node Adaptor Yes Hotspot / Node Adaptors give D-Star users access to remote D-Star systems using over-the-air interface. Can be used as a simplex node or repeater.
- NXDN, a related commercial two-way digital radio standard with similar characteristics
- Project 25, a related digital radio standard sponsored by APCO
- Ricochet modems
- TETRA, a digital two-way radio standard in use outside of North America
- ^ Gary Pearce, KN4AQ (September 2007), Operating D-Star - You’ve seen the ads, now find out how it works and what it does., QST
- ^ "Icom names new D-Star technical specialist". American Radio Relay League. 2003. http://www.arrl.org/news/stories/2003/09/10/3/#Icom. Retrieved 2009-11-27. [dead link]
- ^ Michael Wyrick. "Satellite Detail AMRAD-OSCAR 27". AMSAT. http://www.amsat.org/amsat-new/satellites/satInfo.php?satID=7. Retrieved 2009-12-16.
- ^ "SA Announces Vega CubeSat Selection". European Space Agency. 2008. Archived from the original on 2008-07-18. http://web.archive.org/web/20080718231058/http://www.esa.int/esaED/SEM2BPUG3HF_index_0.html. Retrieved 2008-12-05.
- ^ "The ARRL Letter". American Radio Relay League. 2008. http://www.arrl.org/arrlletter/08/0404/. Retrieved 2008.
- ^ Steven Ford, WB8IMY (September 2009), A D-STAR repeater in space, QST
- ^ "About K5TIT - The Texas Interconnect Team". Texas Interconnect Team. http://www.k5tit.org/about.html.
- ^ "What is D-Star?". Icom America. http://www.icomamerica.com/amateur/dstar/dstar2.asp.
- ^ Gary Pearce, KN4AQ (September 2008), ICOM IC-92AD Dual Band Handheld Transceiver, QST
- ^ "D-RATS - What is it?". Icom Incorporated. http://www.icomamerica.com/en/products/amateur/dstar/dstar/DRATSBrochure.pdf. Retrieved 2009-12-17.
- ^ a b c Dan Smith, KK7DS (September 2008), D-RATS — an Application Suite for D-STAR - Make D-STAR meet your needs with text chatting, file sharing and other applications, QST
- ^ Bruce Perens. "The Codec2 Project: Next-Generation Audio Codecs and Vocoders for Two-Way Radio". http://codec2.org/. Retrieved 2008-07-20.
- ^ David Rowe. "Codec2 - Open Source Low Bit Rate Speech Codec". http://www.rowetel.com/ucasterisk/codec2.html. Retrieved 2010-02-22.
- ^ "D-STAR Trademark Details". http://electronics.zibb.com/trademark/d-star/30086504. Retrieved 2010-06-19.
- ^ Mark Miller, N5RFX (2008). "DStar DV Sensitivity vs. Analog Sensitivity". qsl.net. http://www.qsl.net/kb9mwr/projects/voip/dstar/D-STAR%20Digital%20Voice%20versus%20Analog%20FM%20Sensitivity.pdf. Retrieved 2009-11-26.
- ^ a b Bob Witte, KØNR (2006). "D-STAR Digital Voice for VHF/UHF". CQ VHF. pp. 45. http://www.rwitte.com/Files/D-STAR%20CQ-VHF%20FM%20Column%20Winter06.pdf.
- ^ Steven Ford, WB8IMY (2008). ARRL's VHF Digital Handbook (1 ed.). American Radio Relay League. ISBN 978-0872591226. http://www.qsl.net/kb9mwr/projects/voip/apco25/APCO-25.pdf.
- ^ Mike Kionka, KlQGO (September 2008). "Project 25 for Amateur Radio". QST. http://www.qsl.net/kb9mwr/projects/voip/apco25/Project%2025%20for%20Amateur%20Radio.pdf. Retrieved 2010-07-18.
- ^ "D-STAR Situation in France / European Parliament Petition". http://draf.asso.fr/index.php?post/2010/06/28/D-STAR-situation-in-France#pr. Retrieved 2010-06-29.
- ^ John Hays, K7VE. "Converting the Kenwood TKR-820 to use with D-STAR". http://k7ve.org/blog/?p=102.
- ^ Gary Pearce, KN4AQ (February 2009), DV Dongle D-STAR Adapter, QST
- ^ "Amateur Equipment". Kenwood (Google Translation). http://translate.google.com/translate?hl=en&sl=ja&u=http://www.kenwood.com/newsrelease/2007/20070628.html&sa=X&oi=translate&resnum=1&ct=result&prev=/search%3Fq%3Dsite:www.kenwood.com%2Bd-star%26num%3D50%26hl%3Den%26safe%3Dactive%26sa%3DG.
- ARRL: QST Icom IC 2820H Dual Band FM Transceiver Vol 91 No 11 November 2007 Page 74, by Steve Ford, WB8IMY does a review on the IC 2820H Dual Band FM Transceiver.
- RSGB: RadCom March 2008 (Vol 83 No 03) review of Icom IC-E2820 transceiver and overview of D-Star.
- CQ-VHF: D-STAR in the Southeastern U.S., Greg Sarratt, W4OZK, (partial), http://www.cq-vhf.com/D-StarWin08.html
- Alabama D-STAR Information
- D-STAR FAQ and Information
- Icom D-STAR information
- The Rain Report by J. Maynard, K5ZC
- D-STAR video by the Washington County ARES group
Two-way radio Amateur and hobbyist Aviation (aeronautical mobile) Land-based commercial and government mobileBusiness band · Base station · Mobile radio · Professional Mobile Radio · Radio repeater · Specialized Mobile Radio · Trunked radio system · Walkie talkie Marine (shipboard) Signaling / Selective callingCTCSS · Dual-tone multi-frequency · D-STAR · MDC-1200 · Push to talk · Quik Call I · Quik Call II · Selcall System elements and principlesCategories:
- Packet radio
- Quantized radio modulation modes
Wikimedia Foundation. 2010.