Critical heat flux

Critical heat flux

Critical heat flux describes the thermal limit of a phenomenon where a phase change occurs during heating (such as bubbles forming on a metal surface used to heat water), which suddenly decreases the efficiency of heat transfer, thus causing localised overheating of the heating surface.

The Critical heat flux for ignition is the lowest thermal load per unit area capable of initiating a combustion reaction on a given material (either flame or smoulder ignition).



When liquid coolant undergoes a change in phase due to the absorption of heat from a heated solid surface, a higher transfer rate occurs. The more efficient heat transfer from the heated surface (in the form of heat of vaporization plus sensible heat) and the motions of the bubbles (bubble-driven turbulence and convection) leads to rapid mixing of the fluid. Therefore, boiling heat transfer has played an important role in industrial heat transfer processes such as macroscopic heat transfer exchangers in nuclear and fossil power plants, and in microscopic heat transfer devices such as heat pipes and microchannels for cooling electronic chips.

The use of boiling is limited by a condition called critical heat flux (CHF), which is also called a boiling crisis or departure from nucleate boiling (DNB). The most serious problem is that the boiling limitation can be directly related to the physical burnout of the materials of a heated surface due to the suddenly inefficient heat transfer through a vapor film formed across the surface resulting from the replacement of liquid by vapor adjacent to the heated surface.

Consequently, the occurrence of CHF is accompanied by an inordinate increase in the surface temperature for a surface-heat-flux-controlled system. Otherwise, an inordinate decrease of the heat transfer rate occurs for a surface-temperature-controlled system. This can be explained with Newton's law of cooling:

q = h(T_w-T_f)\,

where q represents the heat flux, h represents the heat transfer coefficient, Tw represents the wall temperature and Tf represents the fluid temperature. If h decreases significantly due to the occurrence of the CHF condition, Tw will increase for fixed q and Tf while q will decrease for fixed ΔT.

Correlations for critical heat flux

The critical heat flux is an important point on the boiling curve and it may be desirable to operate a boiling process near this point. However, one could become cautious of dissipating heat in excess of this amount. Zuber, through a hydrodynamic stability analysis of the problem has developed an expression to approximate this point.

{{\frac{q}{A}}_{max}}=C{{h}_{fg}}{{\rho }_{v}}{{\left[ \frac{\sigma g\left( {{\rho }_{L}}-{{\rho }_{v}} \right)}{{{\rho }_{v}}^{2}} \right]}^{{}^{1}\!\!\diagup\!\!{}_{4}\;}}

It is independent of the surface material and is weakly dependent upon the heated surface geometry described by the constant C. For large horizontal cylinders, spheres and large finite heated surfaces, the value of the Zuber constant C=\frac{\pi }{24}=0.131. For large horizontal plates, a value of C = 0.149 is more suitable. The critical heat flux depends strongly on pressure, mainly through the pressure dependence of surface tension and the heat of vaporization.[1]

Applications in heat transfer

The understanding of CHF phenomenon and an accurate prediction of the CHF condition are important for safe and economic design of many heat transfer units including nuclear reactors, fossil fuel boilers, fusion reactors, electronic chips, etc. Therefore, the phenomenon has been investigated extensively over the world since Nukiyama first characterized it.[2] In 1950 Kutateladze suggested the hydrodynamical theory of the burnout crisis. [3] Much of significant work has been done during the last decades with the development of water-cooled nuclear reactors. Now many aspects of the phenomenon are well understood and several reliable prediction models are available for conditions of common interests.

A number of different terms are used to denote the CHF condition: departure from nucleate boiling (DNB), liquid film dryout (LFD), annular film dryout (AFD), dryout (DO), burnout (BO), boiling crisis (BC), boiling transition (BT), etc. DNB, LFD and AFD represent specific mechanisms which will be introduced later.

DO means the disappearance of liquid on the heat transfer surface which properly describes the CHF condition; however, it is usually used to indicate the liquid film dryout from annular flow. BO, BC and BT are phenomenon-oriented names and are used as general terms. The CHF condition (or simply the CHF) is the most widely used today, though it may mislead one to think that there exists a criticality in the heat flux. The terms denoting the value of heat flux at the CHF occurrence are CHF, dryout heat flux, burnout heat flux, maximum heat flux, DNB heat flux, etc.

The term peak pool boiling heat flux is also used to denote the CHF in pool boiling.

See also


  1. ^ Fundamentals of Heat and Mass Transfer 6th Edition by Incropera. 
  2. ^ Nukiyama, S. (1934). "Film boiling water on thin wires". Soc. Mech. Engng., Japan 37. 
  3. ^ Kutateladze, S.S. (1950). "Hydromechanical model of the crisis of boiling under conditions of free convection". Journal of Technical Physics, USSR 20 (11): 1389–1392. 

External links

Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Heat flux — or thermal flux is a flow of energy per unit of area per unit of time. In SI units, it is measured in [W·m 2] . It has both a direction and a magnitude so it is a vectorial quantity. To define the heat flux at a certain point in space, one takes… …   Wikipedia

  • Heat transfer — is a discipline of thermal engineering that concerns the exchange of thermal energy from one physical system to another. Heat transfer is classified into various mechanisms, such as heat conduction, convection, thermal radiation, and phase change …   Wikipedia

  • Quantum flux parametron — Invented by Eiichi Goto (後藤英一) at the University of Tokyo, the Quantum Flux Parametron (QFP) is an improvement over his earlier parametron (パラメトロン) based digital logic technology. Unlike its predecessor, QFP uses superconducting Josephson… …   Wikipedia

  • Nucleate boiling — is a type of boiling that takes place when the surface temperature is hotter than the saturated fluid temperature by a certain amount but where the heat flux is below the critical heat flux. For water, as shown in the graph below, nucleate… …   Wikipedia

  • Coolant — A coolant is a fluid which flows through a device to prevent its overheating, transferring the heat produced by the device to other devices that use or dissipate it. An ideal coolant has high thermal capacity, low viscosity, is low cost, non… …   Wikipedia

  • Behavior of nuclear fuel during a reactor accident — This page is devoted to a discussion of how uranium dioxide nuclear fuel behaves during both normal nuclear reactor operation and under reactor accident conditions such as overheating. Work in this area is often very expensive to conduct, and so… …   Wikipedia

  • Nuclear fuel response to reactor accidents — This page is devoted to a discussion of how uranium dioxide nuclear fuel behaves during both normal nuclear reactor operation and under reactor accident conditions such as overheating. Work in this area is often very expensive to conduct, and so… …   Wikipedia

  • Leidenfrost effect — The Leidenfrost effect is a phenomenon in which a liquid, in near contact with a mass significantly hotter than its boiling point, produces an insulating vapor layer which keeps that liquid from boiling rapidly. This is most commonly seen when… …   Wikipedia

  • CHF — can mean: *The Swiss franc s currency code *Canadian Hunger Foundation *Centre half forward *Chicago Humanities Festival *Congestive heart failure *Critical heat flux *Cryptographic hash function *CHF International …   Wikipedia

  • Barry Azzopardi — Professor Barry Azzopardi MSc, PhD (born Gibraltar, 1947) is a chemical engineer specialising in multiphase flow research. He is a Chartered Engineer, Fellow of the Institution of Chemical Engineers and is currently Lady Trent Professor of… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”