Ourimbah railway station

Ourimbah railway station
Cityrailsign.svg
Ourimbah
Newcastle & Central Coast Line
North Shore Line
Station code OUR
Town Ourimbah
Street(s) Pacific Highway
Distance from Central Station 90.61[1] km
Altitude (above sea level)  ? m
Types of stopping trains Intercity
Number of platforms 2
Number of tracks 2
Platform arrangement 2 Side
Type of station Ground
Ticket barriers No
Transfers available Bus
Disabled access Handicapped/disabled access No
Station facilities Link

Ourimbah railway station is located in Ourimbah on the Central Coast of New South Wales, Australia on the Newcastle & Central Coast Line. The station has two platforms. The station was built in 1886[2] and opened on 15 August 1887.[1] It is served by intercity trains to Sydney & Newcastle, with approximately 40 services each way per day.[3]

More than 2,000 passengers use the station per week.[4] Pedestrian signals were installed at the Highway crossing adjacent to the station in 1997.

Platforms and services

Platform Line Stopping Pattern Notes
CR Plat 1.png
Newcastle & Central Coast Line intercity services to Gosford, Hornsby and Central (via Strathfield)
North Shore Line peak hour intercity services to Hornsby and Central (via Chatswood)
CR Plat 2.png
Newcastle & Central Coast Line intercity services to Wyong and Newcastle
North Shore Line peak hour intercity services to Wyong

Transport links

Busways runs two routes via Ourimbah railway station:

  • Route 36 - between Gosford and Tuggerah
  • Route 37 - between Gosford and Tuggerah

Redbus runs one route via Ourimbah railway station:

References

Preceding station   CityRail   Following station
towards Wyong
North Shore Line services
(peak hours only)
towards Central
towards Newcastle
Newcastle and Central Coast Line
towards Central

Coordinates: 33°21′35″S 151°22′12″E / 33.3597°S 151.3701°E / -33.3597; 151.3701



Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”