Dornier Rs.I

Dornier Rs.I
Role	Flying-boat
National origin	Germany
Manufacturer	Zeppelin-Werke Lindau[1]
Designer	Claudius Dornier[1]
Number built	1[1]

The Dornier Rs.I was a large three-engined biplane flying boat, designed by Claudius Dornier and built during 1914-5 on the German side of Lake Constance. It never progressed beyond taxi-ing trials as it was destroyed in a storm.^[1]

Design and development

Claudius Dornier made a distinct impression with Count Ferdinand von Zeppelin, while working on the still-born giant civil airship in 1913, who promptly set him up as chief designer of the Zeppelin-Werke at Lindau, responsible for building large patrol flying boats. Dorniers first design to be built was the Rs.I. This was a large aircraft (Riesenflugzeug in the German classification) constructed largely of high-strength steel for highly stressed parts, and Duralumin (aluminium alloy) for low stress parts. The large biplane wings sat atop the fuselage and were braced with four complete sets per side of Warren strut style interplane structures comprising 'V' struts, which obviated the need for drag inducing wire bracing. The wing structure was formed with built-up steel spars, four in the top wing and three in the lower wing, and duralumin ribs riveted to the spars and braced internally. The fuselage was also made up from formed steel members built up into a framework which was then covered with fabric or dural sheeting. The powerplant arrangements were unorthodox, with the two out board engines housed inside the bulky fuselage driving a pusher propeller each, via shafts and bevel gearboxes, and a central pusher engine in a nacelle between the wings.^[1]

History

The Rs.I was completed by October 1915 and rolled out at Seemos for trials. On 23 October, during a taxi test, the port propeller and/or gearbox parted company with the aircraft causing damage to the gearbox mountings and the upper wing. The opportunity was taken to move the outboard engines into nacelles identical to the centre engine and mount them between the wings, on an independent structure with cat-walks for engineers to attend to engines in flight. This gave much better clearance for the propellers from spray, which was very likely to have been the cause of the port gearbox/propeller incident. Taxi trials recommenced but with little success till on 21 December 1915 a Foehn wind blew up during trials. Unable to beach the giant flying boat, attempts were made to ride out the storm on the lake, but the moorings gave and the Rs.I was dashed to pieces on the lakeside rocks. This giant aircraft is noteworthy for the construction materials used, let alone the sheer size of it, being the largest aeroplane in the world at the time of its launch.^[1]

Specifications (Dornier Rs.I)

Data from The German Giants^[1]

General characteristics

• Crew: at least 7
• Length: 29 m (95 ft 2 in)
• Wingspan: 43.5 m (142 ft 9 in)
• Height: 7.2 m (23 ft 7 in)
• Wing area: 328.8 m² (3,539 sq ft)
• Empty weight: 7,500 kg (16,535 lb)
• Gross weight: 4,763 kg (10,500 lb)
• Powerplant: 3 × Maybach HS (Mb.IV) , 179 kW (240 hp) each

See also

Aircraft of comparable role, configuration and era

Felixstowe F.2A

• AD Seaplane Type 1000
  

Related lists

• List of seaplanes and amphibious aircraft
• List of aircraft
  

References

Notes

1. ^ ^{a b c d e f g} Haddow, G.W.; Peter M. Grosz (1988). The German Giants - The German R-Planes 1914-1918 (3rd ed.). London: Putnam. ISBN 0 85177 812 7. 

Bibliography

• Haddow G.W., Grosz,P.M. The German Giants. Putnam, 3rd Ed. 1988 ISBN 0-85177-812-7

External links

• http://www.iren-dornier.com/en/aircraft.html