- Comper Kite
-
Kite Role Touring aircraft National origin United Kingdom Manufacturer Comper Aircraft Company Designer Nicholas Comper First flight Summer 1934 Number built 1 The Comper Kite was a single-engined, two-seat touring monoplane built in the UK, derived from the contemporary Comper Streak racer. Only one was built.
Contents
Design and development
The Kite was created by redesigning the single seat Comper Streak racing aircraft as a two seat tourer. The main changes, apart from the installation of the second cockpit by inserting an extra bay into the fuselage were the fitting of a more economical engine and the provision of extra tankage. Those things apart, only a few minor changes distinguished the two aircraft. The Kite, the last aircraft to be completed by the Comper Aircraft Company, was flying in early 1934, only a month after the Streak.[1]
The wings almost identical to those of the Streak.[2] They were built up around a pair of spruce and plywood box section spars, carrying three-ply and spruce ribs and skinned with stressed three-ply sheet. They were gently tapering in plan with rounded tips. There was 5o dihedral outboard, but none on the centre section.[3] Mass balanced ailerons, narrower than those of the Streak filled more than half of the trailing edge. The mass balances were conspicuously mounted on extended upward arms from near the aileron root.[1] The tailplane and split elevators were also of spruce and plywood, but fabric covered. The rounded fin and rudder, though fabric covered had a steel tube structure.[3] The elevators and rudder were mass balanced, with external weights like those on the ailerons.[1] The rudder extended to the bottom of the fuselage, operating in a cut-out between the elevators.[2]
The rectangular cross-section fuselage consisted of four spruce Warren girders, fabric covered behind the engine. The pilot's cockpit was at the trailing edge of the wing and behind there was a deep, rounded fabric covered decking.[3] Immediately in front of the pilot's cockpit was an extra fuselage bay containing the passenger's position,[2] placed over the centre of gravity so that the trim would not be disturbed by their presence or absence. The fuel tanks of the Kite were in the wing roots, again to minimise changes in trim.[1] The mounting for the Pobjoy Niagara engine, constructed of square section steel tube, started immediately in front of the passenger compartment.[2] The 90 hp (67 kW) 7-cylinder radial engine was a development of the earlier Pobjoy R; two notable features were that it was very compact, with a diameter of only 26 in (660 mm) and that it was geared down with a gearbox that off-set the propeller shaft vertically.[4] The result was a very neat cowling with Pobjoy's characteristic front ring and trade mark baffle. The exhaust exited from shallow individual cowls and scooped channels. The Pobjoy drove a two-bladed propeller.[1]
The main wheels, which were provided with brakes, were mounted at the end of the wing centre section, each between pairs of compression legs. Pairs of cross braced struts, joining the legs a little way above the axle and hinged at top and bottom, rotated to retract the wheels rearwards. As on the Streak, the retracted wheels protruded to give some protection in a wheels up landing, but on the Kite there were small fairings ahead of them. At the rear there was a simple, sprung tailskid.[2][1]
The Kite first flew, registered as G-ACME,[5] early in the summer of 1934 and gained its Certificate of Airworthiness on 10 July.[1] With the front cockpit faired over, it flew in the 1934 King's Cup Race[1] at an average speed of 144 mph (232 km/h),[6] but was eliminated in the heats.[1] The Kite was never tried in the tourer role it was designed for, as Comper Aircraft ceased business in August 1934, taken over by the Heston Aircraft Company who had no interest in it. The Kite was broken up at Heston in 1935.[1]
Specifications
Data from Ord-Hume 2000, pp. 304
General characteristics
- Crew: 2
- Length: 19 ft 3 in (5.87 m)
- Wingspan: 23 ft 6 in (7.16 m)
- Height: 7 ft 0 in (2.13 m)
- Wing area: 80 sq ft (7.4 m2)
- Empty weight: 750 lb (340 kg)
- Gross weight: 1,350 lb (612 kg)
- Powerplant: 1 × Pobjoy Niagara 7-cylinder radial, 90 hp (67 kW) take-off maximum at 3,500 rpm[4]
Performance
- Maximum speed: 155 mph (249 km/h; 135 kn)
- Cruise speed: 140 mph (120 kn; 230 km/h)
- Range: 700 mi (608 nmi; 1,127 km)
Notes
Citations
- ^ a b c d e f g h i j Ord-Hume 2000, pp. 303–4
- ^ a b c d e Flight 10 May 1934 p.462-4
- ^ a b c Flight 19 April 1934 p.378-80-4
- ^ a b Ord-Hume 2000, pp. 587–9
- ^ Registration documents for G-ACME
- ^ Jackson 1973, p. 295
Cited sources
- Jackson, A.J. (1973). British Civil Aircraft 1919-72. 2. London: Putnam Publishing. ISBN 0 85177 813 5.
- Ord-Hume, Arthur W.J.G. (2000). British Light Aeroplanes. Peterborough: GMS Enterprises. ISBN 1 870384 76 8 5.
- "Comper Streak.". Flight (19 April 1934): p.337–81. http://www.flightglobal.com/pdfarchive/view/1934/1934%20-%200337.html.
- "Comper Kite.". Flight (10 May 1934): p.462–4. http://www.flightglobal.com/pdfarchive/view/1934/1934%20-%200462.html.
Aircraft produced by Cranwell Light Aeroplane Club and Comper Aircraft Company Cranwell Light Aeroplane Club Comper Aircraft Company Lists relating to aviation General Aircraft (manufacturers) · Aircraft engines (manufacturers) · Airlines (defunct) · Airports · Civil authorities · Museums · Registration prefixes · Rotorcraft (manufacturers) · TimelineMilitary Accidents/incidents Records Categories:- British aircraft 1930–1939
- Touring aircraft
- Comper aircraft
Wikimedia Foundation. 2010.
