Diving helmet

Copper and brass three bolt Soviet diving helmet.

US Navy Diver using Kirby Morgan SuperLite 37 diving helmet^[1]

Diving helmets are worn mainly by professional divers engaged in surface supplied diving, though many models can be adapted for use with scuba equipment.

The helmet seals the whole of the diver's head from the water, allows the diver to see clearly underwater, provides the diver with breathing gas, protects the diver's head when doing heavy or dangerous work, and usually provides voice communications with the surface (and possibly other divers). If a helmeted diver becomes unconscious but is still breathing, the helmet will remain in place and continue to deliver breathing gas until the diver can be rescued. In contrast, the scuba regulator typically used by recreational divers must be held in the mouth, otherwise it will usually fall out of an unconscious diver's mouth and result in drowning.

Before the invention of the demand regulator, all diving helmets used a free-flow design. Gas was delivered at a constant rate, regardless of the diver's breathing, and flowed out through an exhaust valve. Most modern helmets incorporate a demand valve so the helmet only delivers breathing gas when the diver inhales. Free-flow helmets use much larger quantities of gas than demand helmets, which can cause logistical difficulties and is very expensive when special breathing gases (such as heliox) are used. They also produce a constant noise inside the helmet, which can cause communication difficulties. Free-flow helmets are still preferred for hazardous materials diving, because their positive-pressure nature can prevent the ingress of hazardous material in case the integrity of the suit or helmet is compromised. They also remain relatively common in shallow-water air diving, where gas consumption is of little concern, and in nuclear diving because they must be disposed of after some period of use due to irradiation; free-flow helmets are significantly less expensive^{[citation needed]} to purchase and maintain than demand types.

Most modern helmet designs are sealed at the neck using a neoprene "neck dam" which is independent of the suit, allowing the diver his choice of suits depending on the dive conditions. When a neck dam is installed into a drysuit, however, the entire body is isolated from the surrounding liquid, giving an additional degree of warmth and protection. When divers must work in hazardous environments such as sewage or dangerous chemicals, a helmet (usually of the free-flow type or using a series exhaust valve system) is sealed to a special drysuit (commonly made of a fabric with a smooth vulcanised rubber outer surface) to completely isolate and protect the diver. This equipment is the modern equivalent of the historic Mark V "Standard Diving Dress".

Types

Standard diving helmet (Copper hat)

Historically, deep sea diving helmets ranged from the no bolt to two bolt to four bolt helmets; helmets with six, eight, or 12 bolts; and Two-Three, Twelve-Four, and Twelve-Six bolt helmets. Bolts being the method of securing the helmet to the diving suit. The helmet could also be secured to the breastplate (corselet) by bolts as in the case of US twelve-four helmets (12 bolts to the suit, four bolts seal helmet to corselet). The no bolt helmet used a spring-loaded clamp to secure the helmet to corselet over the suit. Swedish helmets were distinctive for using a neck ring instead of a corselet, a pioneer of modern diving euipment but hugely cumbersome and uncomfortable for the diver. This equipment is commonly referred to as "heavy gear."

Lightweight demand helmets

Open circuit helmets

Notable modern commercial helmets include the Kirby Morgan Superlite-17 from 1975 and developments from that model. These helmets are of the demand type, built on a fiberglass shell with chrome-plated brass fittings, and are considered the standard in modern commercial diving for most operations.^[2]

Kirby Morgan dominates the new helmet market, but there have been other notable manufacturers including Savoie, Miller, and Swindell. Many of these are still in use; a new helmet represents an investment of several thousand dollars, and most divers purchase their own or rent one from their employer.

Oceaneering bought out the Ratcliffe helmet, often known by its nickname "Rat Hat". It can function in either free-flow or demand mode.

• 

  Inside view of a Kirby Morgan 37 showing the oro-nasal mask, the mcrophone and a loudspeaker of the communications system

Reclaim helmets

Reclaim helmets use a surface supply system to provide breathing gas to the diver in the same way as in the open circuit helmets, but also have a return system to reclaim and recycle the exhaled gas to save the expensive helium diluent, which would be discharged to the surrounding water and lost in an open circuit system. The reclaimed gas is returned to the surface through a hose in the umbilical which is provided for this purpose, passed through a scrubber to remove carbon dioxide, and can then be repressurised and blended with oxygen to the required mix before storage for later use.

In order to allow the exhaust gas to be discharged from the helmet safely, it must pass through an exhaust regulator, which works on a similar principle to the demand valve for supply gas, but is activated by the pressure difference between the interior of the helmet and the ambient pressure.

Free-flow helmets

The Desco "air hat" is a metal free-flow helmet, designed in 1968 and still in production. Although it has been updated several times, the basic design has remained constant and all upgrades can be retrofitted to older helmets. Its robust and simple design (it can be completely disassembled in the field with only a screwdriver and wrench) makes it popular for shallow-water operations and hazardous materials diving. The Desco is secured to the diver by means of a "jock strap" which runs between the legs, and its buoyancy can be fine-tuned by adjusting intake and exhaust valves.

Light-weight transparent dome type helmets have also been used. For example the Sea Trek surface supplied system, developed in 1998 by Sub Sea Systems, is used for recreational diving.^[3] Also the Lama, developed by Yves Le Masson in the 1970s, has been used in television to let viewers see the face and hear the voice of the presenter speaking underwater.^[4]

• 

  Front view of an AH3 free flow diving helmet

• 

  Side view of an AH3 free flow diving helmet

History

Further information: First appearance of diving helmets

Augustus Siebe is known as the father of Diving. In the year 1837 German-born inventor Augustus Siebe, then living in England, developed a Diving Helmet which was sealed to a watertight, air-containing rubber suit. The closed diving suit, connected to an air pump on the surface, becomes the first effective standard diving dress, and the prototype of hard-hat rigs still in use today. In his obituary Siebe is described as the father of diving.

Siebe Gorman & Co was notable for developing the “closed” diving helmet of the standard diving dress and associated equipment. As the helmet was sealed to the diving suit, it was watertight, unlike the previous “open” helmet systems--which would flood if inverted. The new equipment was safer and more efficient, and revolutionised underwater work from the 1830s.

However, Alexander McKee proposed that brothers John and Charles Deane were the true inventors, and that Siebe was the leading manufacturer of their designs.^[5] This is also confirmed by the fact that Siebe's patents post dated the Deane brothers own and other emulators such as the Sadler company.^{[citation needed]}

Commercial diver and inventor Joe Savoie is credited with inventing the neck dam in the 1960s, which made possible a new era of lightweight helmets, including the Kirby Morgan Superlite series (an adaption of Morgan's existing "Band Mask" into a full helmet.) Savoie chose not to patent his invention because of his desire to improve diver safety.

Modern

An alternative to the diving helmet that allows communication with the surface is the full face diving mask. These cover the diver's face and are held onto his head by adjustable straps.

"Diving helmet" sometimes means a hard safety helmet like a workman's helmet that covers the top and back of the head, but is not sealed. These may be worn with a full-face mask to provide impact protection.

During the First World War the British Army used a few diving helmets out of water as emergency protection from mustard gas.

See also

• Standard diving dress
• Three bolt equipment

References

1. ^ Curley, MD (1986). "Human Factors Evaluation of the Superlite 37B Helmet in the Surface- Supplied, Open-Circuit Mode". US Navy Experimental Diving Unit Technical Report NEDU-11-85. http://archive.rubicon-foundation.org/3527. Retrieved 2008-09-09. 
2. ^ Kirby Morgan DSI dive helmets
3. ^ Sea Trek dive helmet
4. ^ Lama dive helment
5. ^ The Infernal Diver by John Bevan, Hardcover - 314 pages (27 May 1996), Submex Ltd; ISBN 0-9508242-1-6

External links

• Modern helmet photo collection
• U.S. Navy Mark V Diving Helmet
• Diving helmets collection of Diving Heritage museum
• St Maarten Helmet Dive photo collection
• History of Diving Museum The best diving creations from 24 nations are compared side by side in a unique exhibit of 45 rare helmets.