Neukom Elfe

Neukom Elfe


Elfe
Neukom S-4 Elfe 17
Role Open Class and Standard Class sailplane
National origin Switzerland
Manufacturer Neukom
Designer W. Pfenninger
First flight 1964

The Neukom Elfe is family of Swiss single-seat high-performance sailplane designs.

The aircraft is a shoulder-wing cantilever monoplane with a wing made from a balsa and plywood sandwich covered in fiberglass and a fuselage built from plywood.[1]

Contents

Design and development

Elfe and Elfe 2

The first Elfe was a 9 metre wingspan glider that was designed by Swiss designer W. Pfenninger before World War II.[1]

A new design was introduced by Pfenninger in 1947 and was named the Elfe 2. This was probably the first sailplane to feature a laminar flow airfoil. It crashed due to rudder flutter[1]

PM-3

The Elfe series was then taken over, improved and strengthened by the Swiss engineer Markwalder into a third prototype, called the Elfe PM-3.[1][2]

The sole PM-3's construction was started in one factory, but finished in another. It was first flown in 1955 and then went into storage for three years. The aircraft is built from Swiss pine and birch plywood and has a 52.5 foot wingspan. The PM-3 has dive brakes and full-span flaps with aileron interconnects to the flaps. It originally had fixed landing gear, but has been retrofitted with retractable mainwheel.[2]

It was retrieved from storage and flown in Europe by Rene Compte who brought it to compete in the U.S. Nationals at El Mirage, Arizona held in 1962. After the US Nationals the aircraft was not returned to Europe, but was sold, remained in the USA and registered as N6351U in the Experimental - Exhibition/Racing category.[2][3] In 1999 the PM-3 was sold again and moved to the United Kingdom.[4]

Compte originally reported the glider as being very pleasant to fly, but it did not do well in weak soaring conditions. It performed well only in conditions of strong lift. The PM-3 has a glide ratio of 40:1.[2]

Elfe M and S series

Albert Neukom then took over the design and developed the Elfe M, Elfe MN and the AN66.[1]

The next in the line was the V-tailed Standard Elfe S-1, which first flew in 1964.[1]

The second prototype, the S-2, was similar to the S-1, but had a conventional tail. The S-3 was the production version of the S-2 and was first flown in 1966 and entered production that same year. It had a cruciform tail, trailing edge airbrakes and a retractable main wheel.[1]

In competition, a Standard Elfe that was flown by Markus Ritzi of Switzerland, placed second in the 1965 World Gliding Championships held at South Cerney, United Kingdom. United States pilot A.J. Smith finished first in the Standard Class at the 1968 World Gliding Championships held at Leszno, Poland in an S-3.[1]

Variants

Pfenninger Elfe
Pre-World War II prototype
Pfenninger Elfe 2
1947 prototype
Markwalder Elfe PM-3
1955 prototype, competed in 1962 US Nationals
Neukom Elfe M
Early 1960s prototype
Neukom Elfe MN-R
Early 1960s prototype
Neukom AN-66 Super-Elfe[5]
Early 1960s prototype
Neukom S-1 Elfe
Sailplane with a V-tail
Neukom S-2 Elfe
Sailplane with a conventional tail
Neukom S-3 Standard-Elfe[5]
Production version of the S-2 with cruciform tail
Neukom S-4 Elfe 15[5]
15 m wingspan
Neukom S-4 Elfe 17[5]
17 m wingspan

Specifications (Elfe 15)

General characteristics

  • Crew: 1
  • Length: 7.30 m (23 ft 11 in)
  • Wingspan: 15 m (49 ft 2 in)
  • Height: 1.80 m (5 ft 11 in)
  • Wing area: 11.80 m2 (127 ft2)
  • Aspect ratio: 19
  • Empty weight: 230 kg (507 lb)
  • Gross weight: 350 kg (772 lb)

Performance

  • Maximum speed: 210 km/h (131 mph)
  • Rate of sink: 0.64 m/s ( ft/min)

See also

List of gliders

References

  1. ^ a b c d e f g h Activate Media (2006). "Elfe S-3 Neukom". http://www.sailplanedirectory.com/PlaneDetails.cfm?planeID=97. Retrieved 2008-09-05. 
  2. ^ a b c d Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 79. Soaring Society of America, November 1983. USPS 499-920
  3. ^ Federal Aviation Administration (September 2008). "FAA Registry N-Number Inquiry Results". http://registry.faa.gov/aircraftinquiry/NNumSQL.asp?verified=1&NNumbertxt=6351U. Retrieved 2008-09-05. 
  4. ^ Clubzeitschrift der Segelfluggruppe Olten (2004). "dr rhönstei". http://www.sgolten.ch/uploads/media/Rhoenstei_2_2004_01.pdf. Retrieved 2008-10-18. 
  5. ^ a b c d Trustees of the Royal Air Force Museum (2005). "RAF Museum Aircraft Thesaurus". http://www.mda.org.uk/aircraft/13730.htm. Retrieved 2008-09-06. 
  • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. 

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно решить контрольную?

Look at other dictionaries:

  • Elfe 17a — Die Elfe 17a ist ein Segelflugzeug in Holzbauweise/Gemischtbauweise. Konstruiert wurde sie vom Schweizer Architekten Albert Neukom, der seit Mitte der fünfziger Jahre des zwanzigsten Jahrhunderts zahlreiche Segelflugzeuge selber entwickelt und… …   Deutsch Wikipedia

  • Liste de planeurs — (en) Cet article est partiellement ou en totalité issu de l’article de Wikipédia en anglais intitulé « List of Gliders » (voir la liste des auteurs) Sommaire …   Wikipédia en Français

  • Список Планёров — Содержание 1 Abbott Baynes Sailplanes Ltd 2 Abrial 3 Advanced Aeromarine 4 …   Википедия

  • Список планёров — Содержание 1 Abbott Baynes Sailplanes Ltd 2 Abrial 3 Advanced Aeromarine 4 Advan …   Википедия

  • PZL Bielsko SZD-59 — NOTOC The SZD 59 Acro is a single seat glass composite glider for aerobatics and cross country flying by PZL Allstar of Bielsko Biala. [http://www.szd.com.pl/products/59 acro en.html Official SZD 59 Acro website] accessed 2008 02 23]… …   Wikipedia

  • Akaflieg Hannover — L’Untergruppe des Hannoverschen Vereins für Flugwesen est un constructeur aéronautique allemand créé en 1920. Pour se conformer aux usages de l’Idaflieg auqel il était rattaché comme toutes les sections aéronautiques universitaires en Allemagne,… …   Wikipédia en Français

  • Akaflieg Hannover AFH 21 — Akaflieg Hannover L’Untergruppe des Hannoverschen Vereins für Flugwesen est un constructeur aéronautique allemand créé en 1920. Pour se conformer aux usages de l’Idaflieg auqel il était rattaché comme toutes les sections aéronautiques… …   Wikipédia en Français

  • Akaflieg Hannover AFH 22 — Akaflieg Hannover L’Untergruppe des Hannoverschen Vereins für Flugwesen est un constructeur aéronautique allemand créé en 1920. Pour se conformer aux usages de l’Idaflieg auqel il était rattaché comme toutes les sections aéronautiques… …   Wikipédia en Français

  • Akaflieg Hannover AFH 24 — Akaflieg Hannover L’Untergruppe des Hannoverschen Vereins für Flugwesen est un constructeur aéronautique allemand créé en 1920. Pour se conformer aux usages de l’Idaflieg auqel il était rattaché comme toutes les sections aéronautiques… …   Wikipédia en Français

  • Hannover AFH 10 — Akaflieg Hannover L’Untergruppe des Hannoverschen Vereins für Flugwesen est un constructeur aéronautique allemand créé en 1920. Pour se conformer aux usages de l’Idaflieg auqel il était rattaché comme toutes les sections aéronautiques… …   Wikipédia en Français

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”