Nintendo GameCube accessories

This is a list of Nintendo GameCube accessories.

First-party/officially licensed

Controllers

Standard controller

Main article: Nintendo GameCube controller

The Nintendo GameCube controller was released alongside the console and comes bundled with every unit. Standard colors include Indigo, Black, Spice (orange), Emerald Blue (green, only available in Japan), Platinum, and Indigo-clear. There are also limited edition controllers available such as a split blue and red, with the Mario "M" logo replacing the regular GameCube logo seen on standard controllers (there have also been green and blue Luigi "L" controllers and similarly yellow and pale blue Wario "W" controller). There are also specially colored controllers bundled with systems, such as the Mobile Suit Gundam Edition (Red), Symphonic Green Edition (Turquoise Green) and the Final Fantasy Crystal White Edition (Pearl White). The controller can also be used to play certain games on the Wii system and as a result in 2008 Nintendo issued a white GameCube controller (Japan only). This controller also features a white 3 m/10 ft long cable, rather than the standard 2 m/6.5 ft black cable.

WaveBird wireless controller

Main article: WaveBird

The WaveBird is an RF-based wireless controller based on the same design as the standard controller. It communicates with the GameCube system wirelessly through a receiver dongle which connects to one of the system's controller ports. It is powered by two AA batteries. As a power-conservation measure, the WaveBird lacks the rumble function of the standard controller.

DK Bongos

DK Bongos

Main article: DK Bongos

DK Bongos were designed for use with the music games Donkey Konga, Donkey Konga 2 and Donkey Konga 3, and the Donkey Kong platform title Donkey Kong Jungle Beat. A racing game, DK Bongo Blast, was cancelled on the GameCube in favor of the Wii – however, the game no longer supports the Bongos. (Donkey Konga and Donkey Kong Jungle Beat are bundled with DK Bongos compatible games.)

Action pad

The Action Pad was included with Dance Dance Revolution: Mario Mix. It has 4 arrows.

Beat Pad

The Beat Pad was made by Mad Catz and officially licensed by Nintendo. It was included with the game MC Groovz Dance Craze but also sold separately. It has 8 arrows.

ASCII keyboard controller

The ASCII keyboard controller resembles a standard GameCube controller pad stretched to accommodate an alphanumeric keyboard in the center. The keyboard requires the use of two controller ports and contains both Latin and Japanese hiragana characters. It is useful for Phantasy Star Online Episode I & II but is difficult, though not impossible, to acquire outside of Japan.

Hori Game Boy Player Controller

The Hori Game Boy Player Controller is a controller designed to play with the Game Boy Player. It comes in the colors Indigo and Jet Black. The controller is in the shape of a SNES control pad. It does not include the Control Stick or C-Stick, and the R and L buttons lack a range of pressure sensitivity; thus, only uses the D-Pad for movement and the usual buttons for playing. Although meant for the Game Boy Player, this pad can still be used with certain 2D GameCube games, such as Alien Hominid, Capcom vs. SNK 2 EO, Mega Man Anniversary Collection, Sonic Mega Collection, Sonic Gems Collection, or a few 3D GameCube games that support D-pad movement, like Crash Bandicoot: The Wrath of Cortex and Mortal Kombat: Deadly Alliance for example.

Logitech Speed Force Racing Wheel

The Logitech Speed Force Racing Wheel was an officially licensed force feedback steering wheel made exclusively for the GameCube. It is supported by a number of games, including F-Zero GX, R: Racing Evolution, Mario Kart: Double Dash!!, Burnout 2, and the Need for Speed series, among others. There is also an optional accessory pack which includes foot pedals and a lap attachment.

Audio/Video cables

Various A/V cables were made available for the GameCube. Compatibility with these cables varied by region and console model.

RF Switch/modulator

The RF Switch/modulatorwas used for connection to older televisions. Identical to and compatible with earlier Nintendo RF modulators.

Composite video cable

The Composite video cable, or simply AV cable is included with the GameCube. Provides noticeably clearer and sharper picture quality and clearer audio than an RF Switch. Identical to earlier Nintendo (N64 and first generation SNES) A/V cables and is compatible with their respective consoles. Carries dual-channel (stereo) audio and composite video at 576i/50Hz (PAL) or 480i/60Hz (NTSC/PAL60).

S-Video cable

The S-Video Cable provides a better quality picture than composite cables, although not up to that of the Component or RGB Cables. Identical to earlier Nintendo (N64 and 1st generation SNES) S-Video cables and is compatible with their respective consoles. It carries dual-channel (stereo) audio and s-video at 480i/60Hz (NTSC). This cable is only compatible with NTSC GameCubes.

RGB SCART cable

The RGB SCART cable provides a better quality picture than RF, composite or S-Video cables. It utilizes the SCART connector standard and is sold in Europe only. Operates at 576i/50Hz or 480i/60Hz. This cable is only compatible with PAL GameCubes.

Component video cable

The Component Video Cable provides video quality superior to that of other connections, including the RF modulator, composite video cable and s-video cable (at 576i/50Hz or 480i/60Hz). It also enables the use of progressive scan (480p/60Hz) in supported games. The connector plugs in to the Digital AV port rather than the Analog AV port used by other cables and contains a tiny Macronix CMPV-DOL video chip (a digital-to-analog converter). This converts the YCbCr digital video coming from the digital port to the YPbPr analog format used by component video equipment. While CMPV-DOL's reconfigurability allows it to carry out unusual functions such as YCbCr to RGBHV conversion, it cannot take advantage of the digital audio from the console’s digital port. This means that the system's standard A/V cable (which connects to the Analog AV port) must also be connected in order to transmit the audio signal. Available for purchase exclusively in Nintendo's online store, the cables were eventually discontinued by Nintendo due to what Nintendo claimed was a lack of consumer interest. Over time, however, demand for the cables increased dramatically, resulting in the cost of a typical set of used component cables commonly reaching 250% or more of the original suggested retail price for a new set from Nintendo's website (when they were available). This cable is only compatible with DOL-001 models of the GameCube, as Nintendo chose to omit the Digital AV port in subsequent models of the console.

D-Terminal cable

The D-Terminal Video Cable is identical to the Component Video Cable but for its connector. Like the component cable, it may be used to output video in 576i/50Hz, 480i/60Hz or 480p/60Hz, uses the Digital AV port, needs a separate analog cable for audio, and is only compatible with DOL-001 models of the GameCube.

Other

Memory cards

Memory Card 59 (4 Mbit), 251 (16 Mbit), or 1019 (64 Mbit) are available, with a maximum of 127 files being stored on a single card (Memory Card 59 bundled with Animal Crossing). Each card requires 5 blocks of system data meaning that the actual size of cards are 64, 256, or 1024 respectively.

GameCube-Game Boy Advance cable

Nintendo GameCube-Game Boy Advance cable

Main article: Nintendo GameCube-Game Boy Advance cable

The GameCube-Game Boy Advance cable was used for games that support connectivity between the GameCube and the Game Boy Advance (bundled with some games).

Modem and Broadband adapters

GameCube Broadband Adapter, attached to a GameCube

Main article: Nintendo GameCube Modem Adapter

The Modem adapter and Broadband adapter were designed for Internet or LAN play. Both connect to Serial Port 1.

Game Boy Player

Platinum GameCube with Game Boy Player attached

Main article: Game Boy Player

The Game Boy Player allows Game Boy games to be played on the television, using either a GameCube controller or a connected Game Boy Advance (which connects to the Hi Speed Port).

Microphone

Nintendo GameCube Microphone

The Microphone plugs into one of the memory card slots. For use with Mario Party 6, Mario Party 7, Karaoke Revolution Party and Odama. Odama also includes a clip to attach the microphone to the controller. Commands are issued when you hold the X button on the controller. The microphone bundled with Mario Party 6 and 7 and Odama is grey, while the mic bundled with KRP is black.

SD Card adapter

SD Card Adapter and standard memory card

The SD Card Adapter plugs into memory card slot. For use with games exhibiting the SD Card logo, such as Animal Forest e+. This official Nintendo accessory was sold in Japan only.

ProDG

Main article: ProDG (software)

ProDG was an officially licensed development tool for the GameCube. In a photo from the product's homepage (SNSYS: ProDG), the cable appears to be protruding from the left side of the case where the Serial Port 2 should be. If this does connect to that port, this would be the only accessory known to do this.

Panasonic LCD screen

The Panasonic LCD Screen was a planned officially licensed LCD monitor for the GameCube by Panasonic that was used on the GameCube display models at the 2002 Electronic Entertainment Expo. It would have been connected into the GameCube's digital AV out port. The screen had a brace like an easel to prop it up snugly on top of the GameCube. It was supposed to be released in 2002 but was never released and it never passed the planning stage and was never mentioned or shown by Nintendo or Panasonic since then. Although some functioning prototypes might exist.

Carrying cases

Several official carrying cases for both game discs and the GameCube itself in various size and shapes were produced. They were all manufactured by A.L.S. Industries INC and use an NGC model number. ^[1]

Third party

Datel

Action Replay

Main article: Datel Action Replay

Action Replay is a cheat device made by Datel, allowing gamers to enter codes to cheat at games. A FreeLoader is also included with the software. It contains a boot disc with the codes and startup, and a dongle that connects into memory card slot B. The dongle has less memory than a normal memory card, and thus is usually only useful for saving codes, or save files that only take up 1 or 2 memory blocks. The Action Replay save file can be copied onto other memory cards, as well, allowing for one person to share their codes with someone who may have an earlier version of Action Replay, or the sharing of custom-made codes.

Action Replay Max

Action Replay MAX is an Action Replay with a bigger dongle. The dongle can save codes and can be used as a 64 Mb card with 1019 blocks.

Freeloader

FreeLoader disables the regional lockout in the GameCube, allowing games from any region (PAL, NTSC, NTSC-J, etc.) to be played on a console from any region. Some Freeloaders are compatible with the Wii, allowing out of region GameCube games on it (later blocked by system updates).

Advance Game Port

The Advance Game Port is Datel's version of the Game Boy Player. This dongle connects to memory card slot B and is booted up with the included boot disc. Some models have code generators for built in cheat devices. The advantage is that no removal of plates on the bottom, nor tools, are needed to install it. There are a few problems with the audio and video framerate and it is not 100% compatible with GBA games.

Powerboard

The Powerboard is a USB keyboard by Datel with a GameCube adapter that could be used with the online Phantasy Star games and to edit/add codes to the Action Replay. A version of the keyboard without the adapter was also released for the PlayStation 2.

MAX drive

The MAX Drive consists of a dongle, USB cable, and a PC software disc, which allows the user to upload game saves from a memory card to a PC to be stored there or sent over the Internet. However, there have been reports of this device corrupting save files, not always connecting to a PC, and sometimes refusing to receive information from the PC.

MAX Memory

The MAX Memory is a 128 Mb dongle by Datel thst contains up to 2043 blocks of data and is the largest memory card for the GameCube to date. They have a 256mb card sold on amazon for $6.

MAX Media Player

The MAX Media Player allows videos and other downloadable media to be played on a GameCube. Movies and media are transferred to the included 1 GB Micro SD card, that is then inserted into a dongle for the Game Cube and into memory card slot B. The kit also includes boot disc, SD adapter (for use on the Wii in GameCube mode), USB micro SD Card adaptor, and a small remote control for easy management.

Other companies

Pelican Bongos

The Pelican Bongos were made by Pelican Accessories and designed to emulate the DK Bongos. They are a much darker color and have a 10% larger surface than the Nintendo bongos.

Afterglow controller

The Afterglow Controller is a controller produced by Pelican Accessories.^[2]

PlayStation controller adapters

Hais GameCube Smart Joy PlayStation controller adapter

Various adapter which allow PlayStation and PlayStation 2 controllers to be used on the GameCube have been produced, including:

• Innovation INNOV3102 Controller Adaptor
• Mayflash Cube Joy Box^[3]
• Hais GameCube Smart Joy (HS2125C)
  

Controller extension cables

Controller extension cables have been produced by many companies.

LCD Screens

LCD screens for the GameCube have been made by a variety of manufacturers (Intec, Mad Catz, Zenith) that snap onto the GameCube and thus allow you to play it without a television. This would make it somewhat portable for taking it on trips or in the car. The screen piggy backed onto the GameCube's power supply for its power and connects to the digital AV out.

Battery Pack

The Battery Pack is a battery pack made by Intec attaches securely to the bottom of the GameCube with its provided screws and offers about two hours worth of game time on a charge. It was designed to work with an LCD screen.

SD media launcher

The SD Media Launcher allows homebrew games to be played on the GameCube. The dongle connects into the memory card slot and contains a removable SD card which holds the games. Also has a boot disc for starting the unit up, a 1 GB SD card, and a USB SD card adaptor for uploading games from your PC to your GameCube. Will also work on Wii systems in GameCube mode with firmware versions before 3.0.

Hip Screen

The Hip Screen is a controller made by Hip Gear that features a small full color LCD screen, allowing the user to play play games without the use of a TV. Its size was roughly that of the Game Boy Advance, so games that had very fine text could not be well read on it.

VGA cable

The VGA Cable is created from a modified component or d-terminal cable. It allows the GameCube play on a standard computer monitor in 480p.^[4]

References

1. ^ Gamecube - Official NINTENDO Backpack : moeroshop.net
2. ^ Amazon.com: Afterglow Controller for GameCube: Electronics
3. ^ "GameCube Joy Box-Specially designed for PSX/PSX2 official Joypad/ PS2 DDR Supported now!!!". Mayflash. http://www.mayflash.com/gc/gc001/gc001-1.htm. Retrieved 2010-08-16. 
4. ^ "How to make NGC's RGB(VGA) Cable". http://www.geocities.co.jp/Technopolis-Mars/9984/ngcrgb_e.htm. Retrieved 2010-08-16.