Padlocks are portable locks used to protect against theft, vandalism, sabotage, unauthorized use, and harm. They are designed to protect against some degree of forced and surreptitious entry.



An Interchangeable Core Padlock with customized logo
Medieval padlock in Kathmandu
Viking Age padlock found at Birka.

The first padlocks were "convenient" locks so they could be carried and used where necessary.

The earliest positive evidence of padlocks comes from the Roman Era, 500 BC–300 AD.[1]

They were known in early times by merchants traveling the ancient trade routes to Asia and China.[2] Evidence may yet be found that predates the Roman era.

Padlocks with spring tine mechanisms have been found in York, England at the Jorvik Viking settlement - dated 850 AD.[3]

The earliest padlocks used in the United States, sometimes called smokehouse locks, were formed from wrought iron sheet and employed simple lever and ward mechanisms. The design was brought over from England. These locks afforded little protection against forced and surreptitious entry. Contemporary with the smokehouse padlocks and originating in the Slavic areas of Europe, “screw key” padlocks opened with a helical key that was threaded into the keyhole. The key pulled the locking bolt open against a strong spring. Padlocks that offered more key variance were the demise of the screw lock. Improved manufacturing methods allowed the manufacture of better padlocks that put an end to the Smokehouse around 1910.

Around the middle of the 19th century, “Scandinavian” style locks were introduced in America and became a more secure alternative to the prevailing smokehouse and screw locks. These locks had a cast iron body that was loaded with a stack of rotating disks. Each disk had a central cutout to allow the key to pass through them and two notches cut out on the edge of the disc. When locked, the discs passed through cut-outs on the shackle. The key rotated each disk until the notches, placed along the edge of each tumbler in different places, lined up with the shackle, allowing the shackle to slide out of the body. The McWilliams company received a patent for these locks in 1871. The “Scandinavian” design was so successful that JHW Climax & Co. of Newark, New Jersey continued to make these padlocks until the 1950s. Today, other countries are still manufacturing this style of padlock.

Contemporary with the Scandinavian padlock ("Polhem locks") were the “cast heart” locks, so called because of their shape. A significantly stronger lock than the smokehouse and much more resistant to corrosion than the Scandinavian, the hearts had a lock body sand cast from brass or bronze and a more secure lever mechanism. Heart locks had two prominent characteristics: one was a spring-loaded cover that pivoted over the keyhole to keep dirt and insects out of the lock that was called a “drop”. The other was a point formed at the bottom of the lock so a chain could be attached to the lock body to prevent the lock from getting lost or stolen. Cast heart locks were very popular with railroads for locking switches and cars because of their economical cost and excellent ability to open reliably in dirty, moist, and frozen environments.

Around the 1870s, lock makers realized they could successfully package the same locking mechanism found in cast heart locks into a more economical steel or brass shell instead of having to cast a thick metal body. These lock shells were stamped out of flat metal stock, filled with lever tumblers, and then riveted together. Although more fragile than the cast hearts, these locks were attractive because they cost less. In 1908, Adams & Westlake patented a stamped & riveted switch lock that was so economical that many railroads stopped using the popular cast hearts and went with this new stamped shell lock body design. Many lock manufacturers made this very popular style of lock.

Early padlock style, on the front gates of St. Peter's Basilica
Ottoman style handmade padlocks in Turkey

In 1877 Yale & Towne was granted a patent for a padlock that housed a stack of levers and had a shackle that swung away when unlocked. It was a notable design because the levers were sub-assembled into a “cartridge” that could be slid into a cast brass body shell. The assembly would remain together by means of two taper pins passed through the shell and cartridge. This design gave the commercial padlock market a serviceable, rekeyable padlock. About twenty years later Yale made another “cartridge” style padlock that employed their famous pin tumbler mechanism and a shackle that slid out of the body instead of swinging away.

Although machining metal was a method that was available to lock makers since the early 19th century, it was not economically feasible to do so until the very early 20th century when electrical generation and distribution became widespread. Some of the earliest padlocks (c. 1905) that were made from a machined block of cast or extruded metal resemble today’s modern padlock. Corbin and Eagle were one of the first lock makers to machine a solid block of metal and insert a relatively new pin tumbler mechanism and a sliding shackle into the holes machined into the body. This style of padlock was both strong and easy to manufacture. Many machined body padlocks were designed to be disassembled so that locksmiths could easily fit the locks to a certain key. The machined body padlocks are still very popular today. The process of machining allows many modern padlocks to have a “shroud” covering the shackle, which is an extension of the body around the shackle to protect the shackle from getting sheared or cut.

In the early 1920s, Harry Soref started Master Lock off with the first laminated padlock. Plates that were punched from sheet metal were stacked and assembled. Holes that were formed in the middle of the plates made room to accommodate the locking mechanism. The entire stack of plates, loaded with the lock parts in it, was riveted together. This padlock was popular for its low cost and an impact-resistant laminated plate design. Today, many lock makers copy this very efficient and successful design.[4]

Die-casting became popular in the early 1930s among lock makers. Not only was it a very inexpensive way to make padlocks, but it allowed designers to design padlocks with a broad range of geometrical features and ornate designs that sand casting and machining wouldn’t allow. Some lock makers, like Junkunc Brothers, augmented their machined solid body padlock products with the less expensive and more attractive die-cast bodied padlocks. The Wise Lock Company embraced this new medium in making a novel padlock that, with the key inserted, would split lengthwise along the body in order to create an opening in the shackle. Chicago Lock pioneered their new “double bitted wafer” and “ACE” products by installing them into a die cast body. With the advent of inexpensive machining done overseas and the overall poor perception of the security of die cast locks, they no longer dominate today’s padlock market.


A high security padlock.

Forced entry involves the use of tools such as hammers, bolt cutters, chisels, and drills; consequently, forced entry attacks exhibit obvious signs of entry. Surreptitious attacks involve picks, bump keys, shims, unauthorized key duplication, and other bypass techniques that, when employed, do not show obvious signs of compromise.

A quantitative measure of a padlock’s resistance to forced and surreptitious entry can be determined with tests developed by organizations such as ASTM, Sold Secure (United Kingdom), CEN (Europe), and TNO (The Netherlands).


A padlock is composed of a body, shackle, and a locking mechanism. The typical shackle is a “U” shaped loop of metal (round or square in cross-section) that encompasses what is being secured by the padlock (i.e., chain link or hasp). Generally, most padlock shackles either swing away (typical of older padlocks) or slide out of the padlock body when in the unlocked position. Unusually designed padlocks may include a straight, circular, or flexible (cable) shackles. Some shackles split apart and come together to lock and unlock.

There are two basic types of padlock locking mechanisms: integrated & modular. Integrated locking mechanisms directly engage the padlock’s shackle with the tumblers. Examples of integrated locking mechanisms are rotating disks (found in "Scandinavian" style padlocks where a disk rotated by the key enters a notch cut into the shackle to block it from moving) or lever tumblers (where a portion of the bolt that secures the shackle enters the tumblers when the correct key is turned in the lock). Padlocks with integrated locking mechanisms are characterized by a design that does not allow disassembly of the padlock. They are usually older than padlocks with modular mechanisms and often require the use of a key to lock.

The more modern modular locking mechanisms, however, do not directly employ the tumblers to lock the shackle. Instead, they have a plug within the “cylinder” that, with the correct key, turns and allows a mechanism, referred to as a “locking dog” (such as the ball bearings found in American Lock Company padlocks) to retract from notches cut into the shackle. Padlocks with modular locking mechanisms can often be taken apart to change the tumblers or to service the lock. Modular locking mechanism cylinders frequently employ pin, wafer, and disk tumblers. Padlocks with modular mechanisms are usually automatic, or self-locking (that is, the key is not required to lock the padlock)

Combination locks

Combination padlocks do not use keys. Instead, the lock opens when its wheels are lined up correctly to display the correct combination.

Padlock icon symbolising a secure web transaction


While executing secure transactions on the web, the submitted information is encoded using a public cipher key of the receiving node. Some web browsers display a locked padlock icon while using such a secure protocol.

See also

  • Pin tumbler lock
  • Kent Police Museum Home of the world's largest working padlock.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Padlock — Pad lock , v. t. [imp. & p. p. {Padlocked}; p. pr. & vb. n. {Padlocking}.] To fasten with, or as with, a padlock; to stop; to shut; to confine as by a padlock. Milton. Tennyson. [1913 Webster] …   The Collaborative International Dictionary of English

  • padlock — ► NOUN ▪ a detachable lock hanging by a pivoted hook on the object fastened. ► VERB ▪ secure with a padlock. ORIGIN pad is of unknown origin …   English terms dictionary

  • padlock — [pad′läk΄] n. [ME padlocke < pad (< ?) + lokke, LOCK1] a removable lock with a hinged or pivoting link to be passed through a staple, chain, or eye vt. 1. to fasten with or as with a padlock 2. to close (a building) against entrance …   English World dictionary

  • Padlock — Pad lock , n. [Perh. orig., a lock for a pad gate, or a gate opening to a path, or perh., a lock for a basket or pannier, and from Prov. E. pad a pannier. Cf. {Pad} a path, {Paddler}.] 1. A portable lock with a bow which is usually jointed or… …   The Collaborative International Dictionary of English

  • padlock — index handcuff, lock Burton s Legal Thesaurus. William C. Burton. 2006 …   Law dictionary

  • padlock — (n.) removable lock, late 15c., from lokke (see LOCK (Cf. lock) (n.)), but the first element is a complete mystery. The verb is attested from 1640s. Related: Padlocked; padlocking …   Etymology dictionary

  • padlock — I UK [ˈpædˌlɒk] / US [ˈpædlɑk] noun [countable] Word forms padlock : singular padlock plural padlocks a lock that you can fix to something such as a gate, bicycle, or suitcase. It has a curved bar on top that moves when you open the lock with a… …   English dictionary

  • padlock — [[t]pæ̱dlɒk[/t]] padlocks, padlocking, padlocked 1) N COUNT A padlock is a lock which is used for fastening two things together. It consists of a block of metal with a U shaped bar attached to it. One end of the bar is released by turning a key… …   English dictionary

  • padlock — 1. noun a lock, usually with a panel with numbered dials that must be rotated in a specific fashion in order to unlock 2. verb to lock using a padlock Janitors padlock the gates (Del Amitri, Nothing Ever Happens) …   Wiktionary

  • padlock — pad|lock [ˈpædlɔk US la:k] n [Date: 1400 1500; Origin: pad (of unknown origin) + lock] a lock that you can put on a gate, door, bicycle etc ▪ He undid the padlock and eased back the lid. >padlock v [T] …   Dictionary of contemporary English

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”