Electronic paper

Electronic paper, also called e-paper, is a display technology designed to mimic the appearance of ordinary ink on paper. Unlike a conventional flat panel display, which uses a backlight to illuminate its pixels, electronic paper reflects light like ordinary paper and is capable of holding text and images indefinitely without drawing electricity, while allowing the image to be changed later.

To build e-paper, several different technologies exist, some using plastic substrate and electronics so that the display is flexible. E-paper is considered more comfortable to read than conventional displays. This is due to the stable image, which does not need to be refreshed constantly, the wider viewing angle, and the fact that it uses reflected ambient light. While it has a similar contrast ratio to that of a newspaper and is lightweight and durable, it still lacks good color reproduction.

Applications include e-book readers capable of displaying digital versions of books and e-paper magazines, electronic pricing labels in retail shops [cite web
url = http://www.sipix.com/applications/pricinglabels.html
title = SiPix pricing labels
accessdate = 2008-01-13 ] , time tables at bus stations [cite journal
last = Graham-Rowe
title = Electronic paper rewrites the rulebook for displays
journal = Nature Photonics
volume = 1
pages = 248
date = 2007
doi = 10.1038/nphoton.2007.53 [http://www.diginfo.tv/archives/fujitsu_03-thumb.jpgPhoto] ] , and electronic billboards [cite web
url = http://www.magink.com/product.php
title = magink e-paper billboards
accessdate = 2008-01-13] .

Electronic paper should not be confused with digital paper, which is a pad to create handwritten digital documents with a digital pen.

Technology

Electronic paper was first developed in the 1970s by Nick Sheridon at Xerox's Palo Alto Research Center. The first electronic paper, called Gyricon, consisted of polyethylene spheres between 20 and 100 micrometres across. Each sphere is composed of negatively charged black plastic on one side and positively charged white plastic on the other (each bead is thus a dipoleCrowley, J. M.; Sheridon, N. K.; Romano, L. " [http://dx.doi.org/10.1016/S0304-3886(01)00208-X Dipole moments of gyricon balls] " Journal of Electrostatics 2002, 55, (3-4), 247.] ). The spheres are embedded in a transparent silicone sheet, with each sphere suspended in a bubble of oil so that they can rotate freely. The polarity of the voltage applied to each pair of electrodes then determines whether the white or black side is face-up, thus giving the pixel a white or black appearance.New Scientist. [http://www.newscientist.com/article/mg16221864.700.html Paper goes electric (1999)] ]

Electrophoretic

An electrophoretic display is an information display that forms visible images by rearranging charged pigment particles using an applied electric field.

In the simplest implementation of an electrophoretic display, titanium dioxide particles approximately one micrometre in diameter are dispersed in a hydrocarbon oil. A dark-colored dye is also added to the oil, along with surfactants and charging agents that cause the particles to take on an electric charge. This mixture is placed between two parallel, conductive plates separated by a gap of 10 to 100 micrometres. When a voltage is applied across the two plates, the particles will migrate electrophoretically to the plate bearing the opposite charge from that on the particles. When the particles are located at the front (viewing) side of the display, it appears white, because light is scattered back to the viewer by the high-index titania particles. When the particles are located at the rear side of the display, it appears dark, because the incident light is absorbed by the colored dye. If the rear electrode is divided into a number of small picture elements (pixels), then an image can be formed by applying the appropriate voltage to each region of the display to create a pattern of reflecting and absorbing regions.

Electrophoretic displays are considered prime examples of the electronic paper category, because of their paper-like appearance and low power consumption.

Examples of commercial electrophoretic displays include the high-resolution active matrix displays used in the Amazon Kindle, Sony Librie, Sony Reader, and iRex iLiad e-readers. These displays are constructed from an electrophoretic imaging film manufactured by E Ink Corporation. The Motorola MOTOFONE F3 was the first mobile phone to use the technology, in an effort to help eliminate glare from direct sunlight during outdoor use [cite web
url = http://www.motorola.com/mediacenter/news/detail.jsp?globalObjectId=7076_7025_23
title = Motorola Introduces MOTOFONE - New, Market-Defining Mobile Designed to Keep Everyone Connected
accessdate = 2007-12-03] .

Electrophoretic displays can be manufactured using the Electronics on Plastic by Laser Release (EPLaR) process developed by Philips Research to enable existing AM-LCD manufacturing plants to create flexible plastic displays.

In the 1990s another type of electronic paper was invented by Joseph Jacobson, who later co-founded the E Ink Corporation which formed a partnership with Philips Components two years later to develop and market the technology. In 2005, Philips sold the electronic paper business as well as its related patents to Prime View International. This used tiny microcapsules filled with electrically charged white particles suspended in a colored oil.Comiskey, B.; Albert, J. D.; Yoshizawa, H.; Jacobson, J. " [http://dx.doi.org/10.1038/28349 An electrophoretic ink for all-printed reflective electronic displays] " Nature 1998, 394, (6690), 253-255.] In early versions, the underlying circuitry controlled whether the white particles were at the top of the capsule (so it looked white to the viewer) or at the bottom of the capsule (so the viewer saw the color of the oil). This was essentially a reintroduction of the well-known electrophoretic display technology, but the use of microcapsules allowed the display to be used on flexible plastic sheets instead of glass.

One early version of electronic paper consists of a sheet of very small transparent capsules, each about 40 micrometres across. Each capsule contains an oily solution containing black dye (the electronic ink), with numerous white titanium dioxide particles suspended within. The particles are slightly negatively charged, and each one is naturally white.

The microcapsules are held in a layer of liquid polymer, sandwiched between two arrays of electrodes, the upper of which is made from indium tin oxide, a transparent conducting material. The two arrays are aligned so that the sheet is divided into pixels, which each pixel corresponding to a pair of electrodes situated either side of the sheet. The sheet is laminated with transparent plastic for protection, resulting in an overall thickness of 80 micrometres, or twice that of ordinary paper.

The network of electrodes is connected to display circuitry, which turns the electronic ink 'on' and 'off' at specific pixels by applying a voltage to specific pairs of electrodes. Applying a negative charge to the surface electrode repels the particles to the bottom of local capsules, forcing the black dye to the surface and giving the pixel a black appearance. Reversing the voltage has the opposite effect - the particles are forced from the surface, giving the pixel a white appearance. A more recent incarnation [New Scientist. [http://www.newscientist.com/article/dn659.html Roll the presses (2001)] ] of this concept requires only one layer of electrodes beneath the microcapsules.

= Electro-wetting displays=

The technology is based on controlling the shape of a confined water/oil interface by an applied voltage. With no voltage applied, the (coloured) oil forms a flat film between the water and a hydrophobic (water-repellent), insulating coating of an electrode, resulting in a coloured pixel.

When a voltage is applied between the electrode and the water, the interfacial tension between the water and the coating changes. As a result the stacked state is no longer stable, causing the water to move the oil aside.

This results in a partly transparent pixel, or, in case a reflective white surface is used under the switchable element, a white pixel. Because of the small size of the pixel, the user only experiences the average reflection, which means that a high-brightness, high-contrast switchable element is obtained, which forms the basis of the reflective display.

Displays based on electro-wetting have several attractive features. The switching between white and coloured reflection is fast enough to display video content.

Furthermore, it is a low-power and low-voltage technology, and displays based on the effect can be made flat and thin. The reflectivity and contrast are better or equal to those of other reflective display types and are approaching those of paper.

In addition, the technology offers a unique path toward high-brightness full-colour displays, leading to displays that are four times brighter than reflective LCDs and twice as bright as other emerging technologies [LiquaVista electrowetting display technologies http://www.liquavista.com] .

Instead of using red, green and blue (RGB) filters or alternating segments of the three primary colours, which effectively result in only one third of the display reflecting light in the desired colour, electro-wetting allows for a system in which one sub-pixel is able to switch two different colours independently.

This results in the availability of two thirds of the display area to reflect light in any desired colour. This is achieved by building up a pixel with a stack of two independently controllable coloured oil films plus a colour filter.

The colours used are cyan, magenta and yellow, which is a so-called subtractive system, comparable to the principle used in inkjet printing for example. Compared to LCD another factor two in brightness is gained because no polarisers are required. [ [http://www.hinduonnet.com/seta/2003/10/02/stories/2003100200060200.htm The Hindu : Technology for reflective full-colour display ] ]

Other technologies

Electronic paper has also been produced using technologies such as cholesteric LCD (Ch-LC). Other research efforts into e-paper have involved using organic transistors embedded into flexible substrates,Huitema, H. E. A.; Gelinck, G. H.; van der Putten, J. B. P. H.; Kuijk, K. E.; Hart, C. M.; Cantatore, E.; Herwig, P. T.; van Breemen, A. J. J. M.; de Leeuw, D. M. " [http://dx.doi.org/10.1038/414599a Plastic transistors in active-matrix displays] " Nature 2001, 414, (6864), 599.] Gelinck, G. H. et al. " [http://dx.doi.org/10.1038/nmat1061 Flexible active-matrix displays and shift registers based on solution-processed organic transistors] " Nature Materials 2004, 3, (2), 106-110.] including attempts to build them into conventional paper.Andersson, P.; Nilsson, D.; Svensson, P. O.; Chen, M.; Malmström, A.; Remonen, T.; Kugler, T.; Berggren, M. " [http://www3.interscience.wiley.com/cgi-bin/abstract/99018467/ABSTRACT Active Matrix Displays Based on All-Organic Electrochemical Smart Pixels Printed on Paper] " Adv Mater 2002, 14, (20), 1460-1464.] Simple color e-paper [New Scientist. [http://www.newscientist.com/article/dn837.html Read all about it] ] consists of a thin colored optical filter added to the monochrome technology described above. The array of pixels is divided into triads, typically consisting of the standard cyan, magenta and yellow, in the same way as CRT monitors (although using subtractive primary colors as opposed to additive primary colors). The display is then controlled like any other electronic color display.

Applications

Several companies are simultaneously developing electronic paper and ink. While the technologies used by each company provide many of the same features, each has its own distinct technological advantages. All electronic paper technologies face the following general challenges:

* A method for encapsulation
* An ink or active material to fill the encapsulation
* Electronics to activate the ink

Electronic ink can be applied to both flexible and rigid materials. In the case of flexible displays, the base requires a thin, flexible material tough enough to withstand considerable wear, such as extremely thin plastic. The method of how the inks are encapsulated and then applied to the substrate is what distinguishes each company from each other. These processes are complex and are carefully guarded industry secrets. The manufacture of electronic paper promises to be less complicated and less costly than traditional LCD manufacture.

There are many approaches to electronic paper, with many companies developing technology in this area. Other technologies being applied to electronic paper include modifications of liquid crystal displays, electrochromic displays, and the electronic equivalent of an Etch A Sketch at Kyushu University. Advantages of electronic paper includes low power usage (power is only drawn when the display is updated), flexibility and better readability than most displays. Electronic ink can be printed on any surface, including walls, billboards, product labels and T-shirts. The ink's flexibility would also make it possible to develop rollable displays for electronic devices. The ideal electronic paper product is a digital book that can typeset itself and could be read as if it were made of regular paper, yet programmed to download and display the text from any book. Another possible use is in the distribution of an electronic version of a daily paper.

Commercial applications

Education: digital schoolbooks

* In January 2007, the Dutch specialist in e-Paper [http://edupaper.nl/inhoud/welcome edupaper.nl] started a pilot project in a secondary school in Maastricht, using e-Paper as digital schoolbooks to reduce costs and students' daily burden of books.

e-Books

* In September 2006 Sony released the PRS-500 Sony Reader e-book reader. On October 2, 2007, Sony announced the PRS-505, an updated version of the Reader.

* In November 2006, the iRex iLiad was ready for the consumer market. Consumers could initially read e-Books in PDF and HTML formats, and in July 2007 support for the popular Mobipocket PRC format was added, but price was still a problem. With the introduction of the competing Cybook, prices have decreased almost 50%.

* In late 2007, Amazon began producing and marketing the Amazon Kindle, an e-book with an e-paper display.

Newspapers

* In September 2007, the French daily "Les Echos" announced the official launch of an electronic version of the paper on a subscription basis. Two offers are available, combining a one year subscription and a reading device. One interesting point of the offer is the choice of a light (176g) reading device (adapted for Les Echos by Ganaxa) or the iRex iLiad. Two different processing platforms are used to deliver readable information of the daily, one based on the newly developed GPP electronic ink platform from "Ganaxa", and the other one developed internally by Les Echos.
* In February 2006, the Flemish daily "De Tijd" distributed an electronic version of the paper to select subscribers in a limited marketing study, using a pre-release version of the iRex iLiad. This was the first recorded application of electronic ink to newspaper publishing.

* Since January 2008, the Dutch daily "NRC Handelsblad" is distributed for the iRex iLiad reader.

Digital Photo Frame

* In the future as electronic paper displays improve and full high quality color is possible, expect to see the technology incorporated in digital photo frame products. Existing digital photo frames draw power constantly and although a recent innovation are considered wasteful in todays world. Furthermore, the conventional back-lit display is not to all tastes and may even be considered inferior to a conventional static photo with it's limited viewing angle and moderate physical thickness. A digital photo frame using e-paper technology would address all of these shortcomings and could prove to be the first mainstream "boom" product of the later generation color e-paper technology, since at present the other applications are considered quite specialist or in the very least, "geeky". A well designed future digital photo frame could run for months or even years from batteries, consuming power only to briefly boot up to connect to a USB memory stick or other storage device and then change the display, before powering off all components.

Displays embedded in smart cards

* Flexible display cards enable financial payment cardholders to generate a one-time password to reduce online banking and transaction fraud. Electronic paper could offer a flat and thin alternative to existing key fob tokens for data security. The world’s first ISO compliant smart card with an embedded display was developed by Smartdisplayer using [http://www.sipix.com/technology/index.html SiPix Imaging’s electronic paper] .

Cell phone displays

*Motorola's low-cost mobile phone, the Motorola F3, also uses an alphanumeric black/white electrophoretic display.

ee also

* List of e-book readers

Further reading

* [http://www.newscientist.com/article/mg17723785.000.html New Scientist - Electric paper (2003)]
* [http://www.newscientist.com/article/dn4202.html New Scientist - E-paper may offer video images (2003)]
* [http://www.newscientist.com/article/mg17924141.200.html New Scientist - Paper comes alive (2003)]
* [http://www.newscientist.com/article/dn4602.html New Scientist - Most flexible electronic paper yet revealed (2004)]
* [http://www.newscientist.com/channel/mech-tech/mg18524907.100.html New Scientist - Roll-up digital displays move closer to market (2005)]
* [http://www.electronista.com/articles/07/11/16/seiko.ultra.dense.e.paper/ Electronista - Seiko Epson develops ultra-dense e-paper display (11-2007)]

References

External links

* [http://hantarto.definitionroadsafety.org/epublishing.php Electronic Paper:Merging between Traditional Publishing & e-Publishing]
* [http://www.wired.com/news/technology/0,1282,42056,00.html Wired article on E Ink-Philips partnership, and background]
*. Retrieved on 2007-08-26.
* [http://www.media.mit.edu/micromedia/elecpaper.html MIT ePaper Project]
* [http://www2.parc.com/hsl/projects/gyricon/ Xerox PARC epaper project]
* [http://mi-lab.org/projects/office-of-tomorrow/ Office of Tomorrow]
*
* [http://www.display-magazin.net The Online Magazine for displays]
* [http://www.TheFutureOfThings.com/articles/1000/the-future-of-electronic-paper.html The Future of Electronic Paper] - Past, present and future of e-paper including an interview with Nick Sheridon, Father of E-paper at Xerox