Balancing network

Balancing network

In a hybrid set, hybrid coil, or resistance hybrid, balancing network is a circuit used to match, "i.e.", to balance, the impedance of a uniform transmission line, (e.g., a twisted metallic pair, coaxial cable, etc.) over a selected range of frequencies. A balancing network is required to ensure isolation between the two ports of the four-wire side of the hybrid.

A balancing network can also be a device used between a balanced device or line and an unbalanced device or line for the purpose of transforming from balanced to unbalanced or from unbalanced to balanced.

Source: from Federal Standard 1037C and from MIL-STD-188

ee also

*balun


Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • balancing network — pusiausvirinimo grandinė statusas T sritis radioelektronika atitikmenys: angl. balancing network vok. Ausgleichschaltung, f rus. уравновешивающая цепь, f pranc. réseau d équilibrage, m …   Radioelektronikos terminų žodynas

  • Network Load Balancing — (commonly referred to as dual WAN routing or multihoming) is the ability to balance traffic across two WAN links without using complex routing protocols like BGP. This capability balances network sessions like Web, email, etc. over multiple… …   Wikipedia

  • Network Load Balancing Services — (NLBS) is a Microsoft implementation of clustering and load balancing that is intended to provide high availability and high reliability, as well as high scalability. NLBS is intended for applications with relatively small data sets that rarely… …   Wikipedia

  • Network management — refers to the activities, methods, procedures, and tools that pertain to the operation, administration, maintenance, and provisioning of networked systems.[1] Operation deals with keeping the network (and the services that the network provides)… …   Wikipedia

  • Network performance — refers to the service quality of a telecommunications product as seen by the customer. It should not be seen merely as an attempt to get more through the network. The following list gives examples of Network Performance measures for a circuit… …   Wikipedia

  • Network File Control — (NFC) is a common point of command and control for file data delivering a common set of network resident services, centrally defined and managed via policy, then applied across a heterogeneous file storage infrastructure. NFC s associated… …   Wikipedia

  • Network tap — A network tap is a hardware device which provides a way to access the data flowing across a computer network. In many cases, it is desirable for a third party to monitor the traffic between two points in the network. If the network between points …   Wikipedia

  • Network switch — A network switch or switching hub is a computer networking device that connects network segments. The term commonly refers to a multi port network bridge that processes and routes data at the data link layer (layer 2) of the OSI model. Switches… …   Wikipedia

  • Network-attached storage — Not to be confused with Storage area network. Network attached storage Connects to Local area network via: Ethernet Hard drives via one of: SATA SAS USB Fibre Channel Common manufacturers HP NetApp Dell Cisco …   Wikipedia

  • Network bridge — A network bridge connects multiple network segments at the data link layer (layer 2) of the OSI model, and the term layer 2 switch is often used interchangeably with bridge. Bridges are similar to repeaters or network hubs, devices that connect… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”