Akaflieg München Mü13

Akaflieg München Mü13
Akaflieg München Mü13
Role Sailplane
National origin Germany
Manufacturer Akaflieg München
Designer Egon Scheibe, Kurt schmidt and Tony Troeger[1]
First flight 1935
Number built ca 150
Variants Scheibe Bergfalke

The Akaflieg München Mü13 Merlin and Akaflieg München Mü13 Atalante were a motor-glider and glider, respectively, designed and built in Germany from 1935.[1]

Contents

Development

Germany had established Akademische Fliegerschule at several universities after WWI. The first and lead group was established in Berlin, but one of the most prolific, up to WWII, was Akaflieg München.

The Akaflieg München Mü13 was a single-seat development of the two-seat Akaflieg München Mü10 Milan, designed and built by Tony Troeger and Kurt Schmidt, under the direction of Egon Scheibe, in two versions, a motorglider and a pure sailplane. Two prototypes were built: Tony Troeger's motor glider was named 'Merlin' and Kurt Schmidt's sailplane was named 'Atalante'.

The Mü13s were constructed with welded steel tube fuselages faired and covered using wooden longerons with fabric and conventional wooden wings with plywood skinning back to the main spar and fabric aft. In the prototypes the trailing edge of the wings were taken up by steel-framed fabric covered flaps and ailerons, all deflectable to improve thermalling and approach control, but later production aircraft had the flaps eliminated, upper surface spoilers fitted for approach control, with the Mü13D-3 gaining increased span wings, a lengthened fuselage and an enlarged fin and rudder. This arrangement from Egon Scheibe became known as the Schüle München - Munich School. The pilot sat just forward of the main-spar with his head flanked by the wing leading-edges, severely restricting sideways vision. [2]

The performance of the Mü13 was regarded as particularly good at an L/D ratio of 28 and the ability to fly at relatively high speeds due to the slender Mü Scheibe aerofoil section. 'Merlin', flown by Hans Wiesehöfer, flew around southern Germany and the Alps on point to point flights, but 'Atalante' achieved fame as the mount of Kurt Schmidt, who at the age of 16 had been responsible for building a large part of 'Atalante as well as pilotting the glider at the 1935 Rhön competition at the Wasserkuppe, achieving the longest flight at 252km (156.6miles) from the Wasserkuppe to Trier. The success of Kurt Schmidt brought attention to the Mü13 and demand for a production version. Among other accolades 'Atalante', piloted by Kurt Schmidt, also set a German goal flight (fly to a specified goal) record of 482 km (260 nm) in May 1939.[1]

With improvements the Mü13 went into production as the Mü13D, built by the Schwarzwald-Flugzeugbau Wilhelm Jehle (Wilhelm Jehle Black Forest Aircraft Works) in Donaueschingen, with Mü13D's taking part in most gliding competitions from 1936 to the start of WWII.[1]

A tandem two seat version was also produced postwar as the Mü13E, which was later developed into the Scheibe Bergfalke series of Trainers.[2]

Tony Troeger's 'Merlin' had an 18hp(13kW) Köcher-Kröber M4 two cylinder horizontally opposed engine fitted in the nose, re-designated Mü13M Motormerlin, reaching a top speed of 125km/h (78mph) and landed at 45km/h (28mph) making wheel brakes on the retractable mainwheel superfluous. Taking part in the 1937 Rangsdorf competition the Mü13M Motormerlin scored highly demonstrating the best performance.[1]


Variants

  • Mü13 'Merlin' — First prototype of the Mü-13 built in 1935.
  • Mü13 'Atalante' — Second prototype of the Mü-13 built in 1936.
  • Mü13D — Production aircraft built by the Black Forest Aircraft works.
  • Mü13D-3 — One of the last variants of the Mü-13 introduced in 1943.
  • Mü13E — Post-war development flown in 1951 and produced as the Scheibe Bergfalke.
  • Mü13M Motormerlin — 'Merlin' fitted with a Köcher-Kröber M4 two cylinder engine.

Specifications (Mü13 Atalante)

Data from [3]

General characteristics

  • Crew: 1
  • Length: 6.02 m (19 ft 9 in)
  • Wingspan: 16 m (52 ft 6 in)
  • Wing area: 16.16 m2 (174 ft2)
  • Aspect ratio: 15.85
  • Wing profile: Mü Scheibe
  • Empty weight: 170 kg (375 lb)
  • Gross weight: 270 kg (595 lb)

Performance

  • Maximum speed: 200 km/h (124.3 mph)
  • Maximum glide ratio: 28
  • Rate of sink: @ 55km/h (34mph) 0.6 m/s (118 ft/min)

See also

Aircraft of comparable role, configuration and era

References

  1. ^ a b c d e http://www.akaflieg.vo.tum.de/index.php?option=com_content&task=view&id=89&Itemid=120
  2. ^ a b Simons, Martin. Sailplanes 1920-1945”. 2nd revised edition. EQIP Werbung und Verlag G.m.b.H.. Königswinter. 2006. ISBN 3-9806773-4-6
  3. ^ Coates, Andrew. “Jane's World Sailplanes & Motor Gliders new edition”. London, Jane's. 1980. ISBN 0-7106-0017-8
  • Coates, Andrew. “Jane's World Sailplanes & Motor Gliders new edition”. London, Jane's. 1980. ISBN 0-7106-0017-8
  • Simons, Martin. Sailplanes 1920-1945”. 2nd revised edition. EQIP Werbung und Verlag G.m.b.H.. Königswinter. 2006. ISBN 3-9806773-4-6
  • [1]

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Akaflieg München Mü17 Merle — Role Olympic Glider aircraft National origin Germany Manufacturer Akaflieg München First flight 1938 Number built 2 prototypes + ca 60 production units …   Wikipedia

  • Egon Scheibe — (* 28. September 1908; † 26. September 1997) war ein deutscher Unternehmer und Flugzeugkonstrukteur. Inhaltsverzeichnis 1 Leben 2 Leistungen 3 Werke …   Deutsch Wikipedia

  • DFS Olympia Meise — DFS Olympia Meise …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”