Monton Mill, Eccles

Monton Mill, Eccles

Coordinates: 53°29′27″N 2°21′31″W / 53.4907°N -2.3587°E / 53.4907; -2.3587

Monton
Monton Mill, Eccles 0006.png
Monton Mill, Eccles is located in Greater Manchester
{{{alt}}}
Shown within Greater Manchester
Cotton
Spinning (ring mill)
Location Eccles
Serving canal Bridgewater Canal
Serving Railway Liverpool and Manchester Railway
Further ownership Lancashire Cotton Corporation (1930s)
Courtaulds (1964)
Coordinates 53°29′27″N 2°21′31″W / 53.4907°N -2.3587°E / 53.4907; -2.3587
Construction
Built 1906
Power
Date 1906
Construction Firm George Saxon
Engine Type inverted vertical cross compound engine
Valve Gear Corliss valves
rpm 75rpm
Diameter of Flywheel 22ft
Boiler configuration
Running Temperature 160psi
References
[1]

Monton Mill was a cotton spinning mill in Eccles, Greater Manchester, England, built in 1906. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished, it was demolished but its name is preserved in the street name.

Contents

Location

Eccles (pop. 36,600) is a town in the City of Salford, a metropolitan borough of Greater Manchester in North West England, 2.7 miles (4.3 km) west of Salford and 3.7 miles (6.0 km) west of Manchester city centre.[2] Historically a part of Lancashire, Eccles lies on sloping ground between the M602 motorway (to the north), and the Manchester Ship Canal (to the south). The town is served by the Bridgewater Canal and the Liverpool and Manchester Railway.

Monton Mill was situated on the west bank the Bridgewater Canal, 1.0 mile (1.6 km) north of the railway line.

History

The parish of Eccles contained the townships of Barton-upon-Irwell, Clifton, Pendlebury, Pendleton, and Worsley.[3] Toward the end of the Middle Ages the parish had an estimated population of about 4,000 Communicants. Agriculture remained an important local industry, with little change from the medieval system due to a lack of adequate drainage and fertiliser.[4] Local cottage industries included blacksmiths, butchers, thatching, basket weaving, skinning, and tanning. Weaving was popular, using linen and wool. Merchants traded in corn, and badgers bought and sold local produce.[5]

During the 18th century the predominance of textiles in the region is partly demonstrated in the parish registers of 1807, which show that 46 children were baptised with 34 fathers employed as weavers.[6] During the early 19th century the growth of industry meant the majority of the area's inhabitants were employed in textiles or trade, while a minority worked in agriculture. The factory system was also introduced; in 1835 1,124 people were employed in cotton mills, and two mills used power looms. Local hand-produced specialities included striped cotton ticks, checks, Nankeens, and Camrays. Two cotton mills are visible on the 1845 Ordnance Survey map of the area. The area also became renowned for its production of silk, with two mills at Eccles and one at Patricroft.[7]

The engine of growth in the second half of the 19th century was the joint stock company, whereby capital could be raised for the construction of new mills. The first joint stock boom was in the early 1860s and the final boom, between 1904 and 1910 produced dozen of mills designed by the same firms of Oldham architects. Monton Mill was built in 1906, a typical mill of this period.

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–18 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry.[8] Monton Mill, Eccles was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950.

Architecture

Power

It was driven by a 1400 hp inverted vertical cross compound engine by George Saxon built in 1906. The cylinders, 27"HP, 56"LP had a 4-foot stroke. It was steamed at 160psi. The 22-foot flywheel ran at 75rpm. [9]

Equipment

Later extensions

Usage

Owners

  • Lancashire Cotton Corporation (1930s–1964)
  • Courtaulds (1964–
  • Ward and Goldstone, makers of Volex electrical products

Tenants

See also

References

  1. ^ LCC 1951
  2. ^ Greater Manchester Gazetteer, Greater Manchester County Record Office, Places names - D to F, http://www.gmcro.co.uk/Guides/Gazeteer/gazzd.htm, retrieved 2 May 2008 
  3. ^ Harland 1857, p. 589.
  4. ^ Johnston 1967, pp. 56–57.
  5. ^ Johnston 1967, pp. 59–60.
  6. ^ Johnston 1967, p. 84.
  7. ^ Johnston 1967, pp. 84–88.
  8. ^ Dunkerley 2009
  9. ^ Roberts 1921

Notes

Bibliography

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Mars Mill, Castleton — Coordinates: 53°35′49″N 2°11′10″W / 53.5969°N 2.1860°E / 53.5969; 2.1860 …   Wikipedia

  • May Mill, Pemberton — Coordinates: 53°31′39″N 2°40′11″W / 53.5276°N 2.6698°E / 53.5276; 2.6698 …   Wikipedia

  • Minerva Mill, Ashton-under-Lyne — Coordinates: 53°28′56″N 2°05′18″W / 53.4823°N 2.0882°E / 53.4823; 2.0882 …   Wikipedia

  • Mons Mill, Todmorden — Coordinates: 53°43′17″N 2°06′24″W / 53.7215°N 2.1067°E / 53.7215; 2.1067 …   Wikipedia

  • Newby Mill, Shaw — Coordinates: 53°34′51″N 2°05′09″W / 53.5809°N 2.0857°E / 53.5809; 2.0857 …   Wikipedia

  • Century Mill, Farnworth — Coordinates: 53°32′43″N 2°24′40″W / 53.5454°N 2.4112°E / 53.5454; 2.4112 …   Wikipedia

  • Coppull Mill, Chorley — Coordinates: 53°37′38″N 2°39′41″W / 53.6271°N 2.6615°E / 53.6271; 2.6615 …   Wikipedia

  • Dawn Mill, Shaw — Coordinates: 53°34′34″N 2°05′32″W / 53.5762°N 2.0923°E / 53.5762; 2.0923 …   Wikipedia

  • Magnet Mill, Chadderton — Coordinates: 53°32′16″N 2°08′46″W / 53.5378°N 2.1461°E / 53.5378; 2.1461 …   Wikipedia

  • Majestic Mill, Waterhead — Coordinates: 53°32′51″N 2°04′21″W / 53.5476°N 2.0725°E / 53.5476; 2.0725 …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”