List of discontinued Volkswagen Group diesel engines

These diesel engines listed below were formerly used by various marques of automobiles and commercial vehicles of the Volkswagen Group, but are now discontinued.

Since the Volkswagen Group is European, the engine performance ratings are published using the International System of Units (commonly abbreviated "SI"), a modern form of the metric system of figures. The engines will have been tested by a Deutsches Institut für Normung (DIN) accredited testing facility, to either the original "80/1269/EEC", or the later "1999/99/EC" standards. These metric standards for motive power are quoted in either Pferdestärke (PS) (~= 735.5 watts (W), ~= 0.98632 hp (SAE) - sometimes incorrectly referred to as 'metric horsepower'), or kilowatts (kW). In case of conflict, the metric power figure will be stated in kilowatts (kW). For the turning force generated by the engine, the Newton metre (Nm) will be the reference figure of torque.

The diesel engines which Volkswagen Group currently use in todays vehicles can be found in the list of Volkswagen Group diesel engines article.

four cylinders diesels

Based on the 827 engine series with 88 mm cylinder spacing.

50 hp 1.5 D

; engine code : CK; configuration : 1471 cm³ inline 4, bore 76,5 × stroke 80 mm; head : SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression; block : cast iron, five bearings; output : 37 kW (50 hp) at 4400 rpm, 90 N•m (67 ft·lbf) at 2800 rpm; fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Golf 8/76-7/80, VW Passat 8/76-7/80

54 hp 1.6 D

; engine code : CR; configuration : 1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm; block : cast iron, five bearings; head : SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression; fuel : distributor injection pump, whirl chamber; output : 40.3 kW (54 hp) @ 4800 rpm, 100 Nm (74 ft·lbf) @ 2300 rpm; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Golf 8/80-7/82, VW Jetta 8/80-7/82, VW Passat 8/80-7/82, Audi 80 8/80-7/82

50 hp 1.6 D

; engine code : CS; configuration : 1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm; block : cast iron, five bearings; head : SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression; fuel : distributor injection pump, whirl chamber; output : 37 kW (50 hp) @ 4200 rpm, 100 Nm (74 ft·lbf) @ 2500 rpm; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Type 2 1/81-7/87

70 hp 1.6 TurboDiesel

; engine code : CY; configuration : 1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, mechanical lifters, 23:1 compression; block : cast iron, five bearings; output : 51 kW (70 hp) @ 4500 rpm, 133Nm (96 ft·lbf) @ 2600 rpm; fuel : distributor injection pump, whirl chamber; aspiration : turbocharger; application : VW Golf 8/81-7/84, VW Jetta 8/81-7/84, VW Passat 8/81-4/88, Audi 80 8/84-7/86, Audi 90 8/84-7/86

54 hp 1.6 D

; engine code : JK; configuration : 1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm; block : cast iron, five bearings; head : SOHC 2-valve per cylinder, mechanical lifters, 23,5:1 compression; fuel : distributor injection pump, whirl chamber; output : 40.3 kW (54 hp) @ 4800 rpm, 102 Nm (75 ft·lbf) @ 2000 rpm; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Golf 8/82-7/84, VW Jetta 8/82-7/84, VW Passat 8/82-4/88, Audi 80 8/82-7/89, Audi 90 8/82-7/89, VW Caddy 8/82-7/90

54 hp 1.6 D

; engine code : JP; configuration : 1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm; block : cast iron, five bearings; head : SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression; fuel : distributor injection pump, whirl chamber; output : 40.3 kW (54 hp) @ 4580 rpm, 100 Nm (74 ft·lbf) @ 2300 rpm; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Golf 8/83-10/91

70 hp 1.6 TurboDiesel

; engine code : JR; configuration : 1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression; block : cast iron, five bearings; output : 51 kW (70 hp) @ 4500 rpm, 133Nm (96 ft·lbf) @ 2600 rpm; fuel : distributor injection pump, whirl chamber; aspiration : turbocharger; application : VW Golf 8/83-10/91

70 hp 1.6 TurboDiesel

; engine code : JX; configuration : 1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression; block : cast iron, five bearings; output : 51 kW (70 hp) @ 4500 rpm, 138Nm (98 ft·lbf) @ 2500 rpm; fuel : distributor injection pump, whirl chamber; aspiration : turbocharger; application : VW Type 2 8/84-7/91, VW Type 2 syncro 8/85-7/92

79 hp 1.6 TurboDiesel

; engine code: RA; SB; configuration : 1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, mechanical (later hydro) lifters, 23:1 compression; block : cast iron, five bearings; output : Convert|59|kW|hp|0|abbr=on @ 4500 rpm, Auto Nm|152 @ 2200 rpm; fuel : distributor injection pump, whirl chamber; aspiration : turbocharger, intercooler; application : VW Golf II 1989-1991, VW Passat B3 1988-1993

57 hp 1.7 D

; engine code : KY; configuration : 1715 cm³ inline 4, bore 79,5 × stroke 86.4 mm; block : cast iron, five bearings; head : SOHC 2-valve per cylinder, hydro lifters, 23:1 compression; fuel : distributor injection pump, whirl chamber; output : 42 kW (57 hp) @ 4500 rpm, 103 Nm (76 ft·lbf) @ 2800 rpm; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Type 2 10/86-5/92

54 hp 1.6 D

; engine code : ME; configuration : 1588 cm³ (96 cu. in.) inline 4, bore 76,5 × stroke 86.4 mm; block : cast iron, five bearings; head : SOHC 2-valve per cylinder, hydro lifters, 23:1 compression; fuel : distributor injection pump, whirl chamber, altitude corrector; output : 40.3 kW (54 hp) @ 4800 rpm, 96 Nm (70 ft·lbf) @ 2500 rpm; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Golf 5/88-10/91, VW Caddy 8/90-7/92

70 hp 1.6 TurboDiesel

; engine code : MF; configuration : 1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, hydro lifters, 23:1 compression; block : cast iron, five bearings; output : 51 kW (70 hp) @ 4500 rpm, 133Nm (96 ft·lbf) @ 2500 rpm; fuel : distributor injection pump, whirl chamber; aspiration : turbocharger; application : VW Golf 5/88-10/91

45 hp 1.3 D

; engine code : MN; configuration : inline 4, bore 75 × stroke; block : cast iron, five bearings; head : SOHC 2-valve per cylinder, mechanic lifters; fuel : distributor injection pump, whirl chamber; output : 33 kW (45 hp); aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Polo 6/86-7/90

80 hp 1.6 TurboDiesel

; engine code : RA; configuration : 1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, hydro lifters, 23:1 compression; block : cast iron, five bearings; output : 59 kW (80 hp) @ 4500 rpm, 155Nm ( ft·lbf) @ 2800 rpm; fuel : distributor injection pump, whirl chamber; aspiration : turbocharger (water cooled), intercooler; application : Audi 80 4/88-7/89, Audi 90 4/88-7/89, VW Passat 8/88-7/89, VW Golf 4/88-2/90

80 hp 1.6 TurboDiesel

; engine code : SB; configuration : 1588 cm³ inline 4, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, hydro lifters, 23:1 compression; block : cast iron, five bearings; output : 59 kW (80 hp) @ 4500 rpm, 155Nm ( ft·lbf) @ 2500 rpm; fuel : distributor injection pump, whirl chamber; aspiration : turbocharger (water cooled), intercooler; application : Audi 80 4/89-10/91, Audi 90 4/89-10/91, VW Passat 8/89-7/93, VW Golf 10/89-10/91

64 hp 1.9 D

; configuration : 1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm; head : SOHC 2-valve per cylinder, 22:1 compression; block : cast iron, five bearings; output : 47 kW (64 hp) at 4400 rpm, 124 N•m (92 ft·lbf) at 2000 rpm;fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Golf

60 hp 1.7 SDI

; engine code: AKU; configuration : 1715 cm³ inline 4, bore 79,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, 19.5:1 compression; block : cast iron, five bearings; output : 44 kW (60 hp) at 4200 rpm, 115 N•m (85 ft·lbf) at 2200 rpm;fuel : distributor injection pump, direct injection; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Lupo, VW Polo

64 hp 1.9 SDI

; configuration : 1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm; head : SOHC 2-valve per cylinder, 22:1 compression; block : cast iron, five bearings; output : 47 kW (64 hp) at 4200 rpm, 124 N•m (92 ft·lbf) at 2200 rpm;fuel : distributor injection pump, direct injection; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW Golf

68-75 hp 1.9 TD

; engine code : AAZ; configuration : 1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm; head : SOHC 2-valve per cylinder, 22:1 compression; block : cast iron, five bearings; output : 55 kW (75 hp) at 4200 rpm, 150 N•m (111 ft·lbf) at 2000 rpm;fuel : distributor injection pump, whirl chamber; aspiration : turbo charger; application : VW Golf,VW T4,VW Passat,Audi 80

90 hp 1.9 TDI

; configuration : 1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm; head : SOHC 2-valve per cylinder, 19.5:1 compression; block : cast iron, five bearings; output : 66 kW (90 hp) at 4000 rpm, 202 N•m (150 ft·lbf) at 1900 rpm;fuel : distributor injection pump, direct injection; aspiration : turbo charger with intercooler; application : VW Golf

90 hp 1.9 TDI

; configuration : 1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm; head : SOHC 2-valve per cylinder, 19.5:1 compression; block : cast iron, five bearings; output : 66 kW (90 hp) at 3750 rpm, 210 N•m (155 ft·lbf) at 1900 rpm;fuel : distributor injection pump, direct injection; aspiration : turbo charger with intercooler; application : VW Golf

110 hp 1.9 TDI

; engine code: AFN; AVG; AHF; ASV; configuration : 1896 cm³ inline 4, bore 79,5 × stroke 95,5 mm; head : SOHC 2-valve per cylinder, 19.5:1 compression; block : cast iron, five bearings; output : 81 kW (110 hp) at 4150 rpm, 235 N•m (174 ft·lbf) at 1900 rpm;fuel : distributor injection pump, direct injection; aspiration : turbo charger with intercooler; application : VW Golf, VW Vento, VW Bora, VW Passat, VW Sharan, Seat Ibiza, SEAT Córdoba, Seat Leon, SEAT Toledo, SEAT Alhambra, Audi A3, Audi A4, Audi A6, Skoda Octavia, Ford Galaxy

five cylinders diesels

70 hp 2.0 D

; engine code : CN; configuration : inline 5, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, 22:1 compression; block : cast iron, six bearings; output : 51 kW (70 hp) at 4400 rpm, 140 N•m (102 ft·lbf) at 2800 rpm; fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : Audi 100 10/78-7/89

90 hp 2.0 TD

; engine code : DE; configuration : inline 5, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, mechanical lifters, 23:1 compression; block : cast iron, six bearings; output : 66 kW (90 hp); fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold, turbocharger; application : Audi 100 7/81-12/87

102 hp 2.0 TD

; engine code : NC; configuration : inline 5, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, hydro lifters, 23:1 compression; block : cast iron, six bearings; output : 75 kW (102 hp); fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold, turbocharger, intercooler; application : Audi 100 3/88-12/90

71-82 hp 2.4 D

; configuration : 2370 cm³ inline 5, bore 79,5 × stroke 95,5 mm; head : SOHC 2-valve per cylinder, 22:1 compression; block : cast iron, seven bearings; output : 60 kW (82 hp) at 4200 rpm, 160 N•m (118 ft·lbf) at 2200 rpm;fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : Audi 100,VW T4

ix cylinders diesels

75 hp 2.4 D24

; configuration : 2383 cm³ inline 6, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, 22:1 compression; block : cast iron, seven bearings; output : 55 kW (75 hp) at 4000 rpm, 155 N•m (115 ft·lbf) at 2800 rpm;fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW LT, Volvo 740

90-115 hp 2.4 D24

; configuration : 2383 cm³ inline 6, bore 76,5 × stroke 86,4 mm; head : SOHC 2-valve per cylinder, 22:1 compression; block : cast iron, five bearings; output : 70 kW (95 hp) at 4000 rpm, 220 N•m (161 ft·lbf) at 2000 rpm;fuel : distributor injection pump, whirl chamber; aspiration : cast aluminum intake manifold, cast iron exhaust manifold; application : VW LT, Volvo 760

References

* [http://www.autoshoppingcenter.com/Volkswagen/vw_enginescode.html Volkswagen engine codes]
* [http://www.autoshoppingcenter.com/Volkswagen/audi_enginescode.html Audi engine codes]

ee also

* List of Volkswagen Group petrol engines
* List of Volkswagen Group diesel engines
* List of discontinued Volkswagen Group petrol engines
* Turbocharged Direct Injection (TDI)
* Suction Diesel Injection (SDI)
* BlueMotion
* List of Volkswagen Group platforms

External links

* [http://www.volkswagenag.com Volkswagen Group corporate website]