Athlon 64 X2

The Athlon 64 X2 is the first dual-core desktop CPU manufactured by AMD. It is essentially a processor consisting of two Athlon 64 cores joined together on one die with additional control logic. The cores share one dual-channel memory controller, are based on the E-stepping model of Athlon 64 and, depending on the model, have either 512 or 1024 KiB of L2 Cache per core. The Athlon 64 X2 is capable of decoding SSE3 instructions (except those few specific to Intel's architecture), so it can run and benefit from software optimizations that were previously only supported by Intel chips. This enhancement is not unique to the X2, and is also available in the Venice and San Diego single core Athlon 64s.

In June 2007, AMD released low-voltage variants of their low-end 65 nm Athlon 64 X2, named "Athlon X2". [ [http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_9485_13041^15052,00.html#117807 AMD FAQ on removing the "64"] ] The Athlon X2 processors feature reduced TDP of 45 W. [ [http://dailytech.com/AMD+Prepares+45watt+Brisbane/article7468.htm DailyTech report] ]

Multithreading

The main benefit of dual-core processors like the X2 is their ability to process more software threads at the same time. The ability of processors to execute multiple threads simultaneously is called thread-level parallelism (TLP). By placing two cores on the same die, the X2 effectively doubles the TLP over a single-core Athlon 64 of the same speed. The need for TLP processing capability is dependent on the situation to a great degree, and certain situations benefit from it far more than others. Certain programs are currently only written with one thread, and are therefore unable to utilize the processing power of the second core.

Programs often written with multiple threads and capable of utilizing dual-cores include many music and video encoding applications, and especially professional rendering programs. High TLP applications currently correspond to server/workstation situations more than the typical desktop. These applications can realize almost twice the performance of a single-core Athlon 64 of the same specifications. Multi-tasking also runs a sizable number of threads; intense multi-tasking scenarios have actually shown improvements of considerably more than two times [http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2397&p=21] . This is primarily due to the excessive overhead caused by constantly switching threads, and could potentially be improved by adjustments to operating system scheduling code.

In the consumer segment of the market as well, the X2 improves upon the performance of the original Athlon 64, especially for multi-threaded software applications. The overall increase in performance of the entry level Athlon 64 X2 chip (the Athlon 64 X2 3800+) over the single-core Athlon 64 3800+ chip is almost 10%. The spread between the latter and the Athlon 64 X2 5000+ is almost 40% [ [http://www.amd.com/us-en/assets/content_type/DownloadableAssets/AMD_v_Intel_Performance_Comp_Q2-2006.pdf] ] . One can interpret from these numbers that the majority of applications (at least in the benchmark test) are still largely single thread-dominated, hence the absence of a larger gap between the two 3800+ processors. As software programmers begin to take advantage of multi-core processing, the spread between single- and multi-core processors will increase.

Manufacturing costs

Having two cores, the Athlon 64 X2 has an increased number of transistors. The 1-MiB-L2-cache 90 nm Athlon 64 X2 processor is 219 mm² in size with 243 million transistors [http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_9485_13041^13076,00.html] whereas its 1-MiB-L2-cache 90 nm Athlon 64 counterpart is 103.1 mm² and has 164 million transistors [http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_9485_9487^10248,00.html] . The 65 nm Athlon 64 X2 with only 512 KiB L2 per Core reduced this to 118 mm² with 221 million transistors compared to the 65 nm Athlon 64 with 77.2 mm² and 122 million transistors. As a result, a larger area of silicon must be defect free. These size requirements necessitate a more complex fabrication process, which further adds to the production of fewer functional processors per single silicon wafer. This lower yield makes the X2 more expensive to produce than the single-core processor.

In the middle of June 2006 AMD stated that they would no longer make any non-FX Athlon 64 or Athlon 64 X2 models with 1-MiB L2 caches [ [http://www.hardocp.com/news.html?news=MTk1MzgsLCxobmV3cywsLDE= HardOCP report] ] . This led to only a small production number of the Socket-AM2 Athlon 64 X2 with 1 MiB L2 cache per core, known as 4000+, 4400+, 4800+, and 5200+. The Athlon 64 X2 with 512 KiB per core, known as 3800+, 4200+, 4600+, and 5000+, were produced in far greater numbers. The introduction of the F3 stepping then saw several models with 1 MiB L2 cache per core as production refinements resulted in an increased yield.

Change of model nomenclatures

The model numbers of the new line of processors was apparently changed from the PR system used in its predecessors, the Athlon 64 X2. The new model numbering scheme, for later released Athlon X2 processors, is a four digit model number with different family indicator as the first number cite web | url=http://www.vr-zone.com/articles/AMD_Revised_Desktop_Model_Number_Structure/5330.html | title=AMD Revised Desktop Model Number Structure | publisher=VR-Zone | date=2007-10-09] , while Sempron remained using the LE prefix, as follows:

CPU cores

Athlon 64 X2

=Manchester (90 nm SOI)=

* CPU-Stepping: E4
* L1-Cache: 64 + 64 KiB (Data + Instructions), per core
* L2-Cache: 256, 512 KiB fullspeed, per core
* MMX, Extended 3DNow!, SSE, SSE2, SSE3, AMD64, Cool'n'Quiet, NX Bit
* Socket 939, HyperTransport (1000 MHz, HT1000)
* VCore: 1.35 V - 1.4 V
* Power Consumption (TDP): 89 Watt
* First Release: 1 August, 2005
* Clockrate: 2000 - 2400 MHz
**256 KiB L2-Cache:
*** 3600+: 2000 MHz
**512 KiB L2-Cache:
*** 3800+: 2000 MHz
*** 4200+: 2200 MHz
*** 4600+: 2400 MHz (110 Watt TDP)

=Toledo (90 nm SOI)=

* CPU-Stepping: E6
* L1-Cache: 64 + 64 KiB (Data + Instructions), per core
* L2-Cache: 512 or 1024 KiB fullspeed, per core
* MMX, Extended 3DNow!, SSE, SSE2, SSE3, AMD64, Cool'n'Quiet, NX Bit
* Socket 939, HyperTransport (1000 MHz, HT1000)
* VCore: 1.35 V - 1.4 V
* Power Consumption (TDP):
** 89 Watt: 3800+, 4200+ and 4400+
** 110 Watt: 4400+, 4600+ and 4800+
* First Release: 21 April, 2005
* Clockrate:: 2000 - 2400 MHz
**512 KiB L2-Cache:
*** 3800+: 2000 MHz
*** 4200+: 2200 MHz
*** 4600+: 2400 MHz
**1024 KiB L2-Cache:
*** 4400+: 2200 MHz
*** 4800+: 2400 MHz

=Windsor (90 nm SOI)=

* CPU-Stepping: F2, F3
* L1-Cache: 64 + 64 KiB (Data + Instructions), per core
* L2-Cache: 256, 512 or 1024 KiB fullspeed, per core
* MMX, Extended 3DNow!, SSE, SSE2, SSE3, AMD64, Cool'n'Quiet, NX Bit, AMD Virtualization
* Socket AM2, HyperTransport (1000 MHz, HT1000)
* VCore: 1.25 V - 1.35 V
* Power Consumption (TDP):
** 35 Watt (3800+ EE SFF)
** 65 Watt (3600+ to 5200+ EE)
** 89 Watt (3800+ to 6000+)
** 125 Watt (6000+ to 6400+)
* First Release: May 23, 2006
* Clockrate: 2000 MHz - 3200MHz
**256 KiB L2-Cache:
*** 3600+: 2000 MHz
**512 KiB L2-Cache: (often mislabeled as "Brisbane" core)
*** 3800+: 2000 MHz
*** 4200+: 2200 MHz
*** 4600+: 2400 MHz (F2&F3)
*** 5000+: 2600 MHz (F2&F3)
*** 5400+: 2800 MHz (F3)
**1024 KiB L2-Cache:
*** 4000+: 2000 MHz
*** 4400+: 2200 MHz
*** 4800+: 2400 MHz
*** 5200+: 2600 MHz (F2&F3)
*** 5600+: 2800 MHz (F3)
*** 6000+: 3000 MHz (F3)
*** 6400+: 3200 MHz (F3)

=Brisbane (65 nm SOI)=

* CPU-Stepping: G1, G2
* L1-Cache: 64 + 64 KiB (Data + Instructions), per core
* L2-Cache: 512 KiB fullspeed, per core
* MMX, Extended 3DNow!, SSE, SSE2, SSE3, AMD64, Cool'n'Quiet, NX Bit, AMD Virtualization
* Socket AM2, HyperTransport (1000 MHz, HT1000)
* VCore: 1.25 V - 1.35 V
* Die Size: 126 mm²
* Power Consumption (TDP): 65 Watt
* First Release: Dec 5, 2006
* Clockrate: 1900 MHz - 3100MHz
** 3600+: 1900 MHz
** 4000+: 2100 MHz
** 4200+: 2200 MHz (G1&G2)
** 4400+: 2300 MHz (G1&G2)
** 4600+: 2400 MHz (G2)
** 4800+: 2500 MHz (G1&G2)
** 5000+: 2600 MHz (G1&G2)
** 5200+: 2700 MHz (G1&G2)
** 5400+: 2800 MHz (G2)
** 5600+: 2900 MHz (G2)
** 5800+: 3000 MHz (G2)
** 6000+: 3100 MHz (G2)

Athlon X2

'64' was omitted from the name of the Brisbane 'BE' series; the 64-bit marketing campaign initiated by AMD became insignificant once essentially all consumer CPUs became 64-bit processors.

=Brisbane (65 nm SOI)=

* CPU-Stepping: G1, G2
* L1-Cache: 64 + 64 KiB (Data + Instructions), per core
* L2-Cache: 512 KiB fullspeed, per core
* MMX, Extended 3DNow!, SSE, SSE2, SSE3, AMD64, Cool'n'Quiet, NX Bit, AMD Virtualization
* Socket AM2, HyperTransport (1000 MHz, HT1000)
* VCore: 1.15 V - 1.20 V
* Die Size: 118 mm²
* Power Consumption (TDP): 45 Watt
* First Release: June 1, 2007
* Clockrate: 1900 MHz - 2500 MHz
** BE-2300: 1900 MHz
** BE-2350: 2100 MHz (G1&G2)
** BE-2400: 2300 MHz (G2)
** 4050e: 2100 MHz (G2)
** 4450e: 2300 MHz (G2)
** 4850e: 2500 MHz (G2)

ee also

* List of AMD Athlon X2 microprocessors
* List of AMD Athlon 64 microprocessors
* List of AMD microprocessors
* Parallel computing

External links

* [http://www.amdcompare.com/us-en/desktop/default.aspx Athlon 64 model overview on AMD site]
* [http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_9485_13041,00.html Athlon64 X2 product site]
* [http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2648 Comparison] with the Intel Core Duo
* [http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf AMD Athlon 64 Power and Thermal Data Sheet site pdf]

References