Pyroelectric fusion

Pyroelectric fusion

Pyroelectric fusion refers to the technique of using pyroelectric crystals to generate high strength electrostatic fields to accelerate deuterium ions (tritium might also be used someday) into a metal hydride target also containing deuterium (or tritium) with sufficient kinetic energy to cause these ions to undergo nuclear fusion. It was reported in April 2005 by a team at UCLA. The scientists used a pyroelectric crystal heated from −34 to 7 °C (−29 to 45 °F), combined with a tungsten needle to produce an electric field of about 25 gigavolts per meter to ionize and accelerate deuterium nuclei into an erbium deuteride target. Though the energy of the deuterium ions generated by the crystal has not been directly measured, the authors used 100 keV (a temperature of about 109 K) as an estimate in their modeling.[1] At these energy levels, two deuterium nuclei can fuse together to produce a helium-3 nucleus, a 2.45 MeV neutron and bremsstrahlung. Although it makes a useful neutron generator, the apparatus is not intended for power generation since it requires far more energy than it produces.[2][3][4][5]

Contents

History

The process of light ion acceleration using electrostatic fields and deuterium ions to produce fusion in solid deuterated targets was first demonstrated by Cockcroft and Walton in 1932 (see Cockroft-Walton generator). Indeed, the process is used today in thousands of miniaturized versions of their original accelerator, in the form of small sealed tube neutron generators, in the petroleum exploration industry.

The process of pyroelectricity has been known from ancient times.[1] The first use of a pyroelectric field to accelerate deuterons was in 1997 in an experiment conducted by Drs. V.D. Dougar Jabon, G.V. Fedorovich, and N.V. Samsonenko.[2] This group was the first to utilize a lithium tantalate (LiTaO3) pyroelectric crystal in fusion experiments.

The novel idea with the pyroelectric approach to fusion is in its application of the pyroelectric effect to generate the accelerating electric fields. This is done by heating the crystal from −30°C to +45°C over a period of a few minutes.

Results since 2005

In April 2005 a UCLA team headed by the Distinguished Professor of Chemistry and Fellow of the Royal Society James K. Gimzewski[6] and Professor of Physics Seth Putterman utilized a tungsten probe attached to a pyroelectric crystal in order to increase the electric field strength.[3] Brian Naranjo, a graduate student working on his Ph.D. degree under Putterman, conducted the experiment demonstrating the use of a pyroelectric power source for producing fusion on a laboratory bench top device.[4] The device used a lithium tantalate (LiTaO3) pyroelectric crystal to ionize deuterium atoms and to accelerate the deuterons towards a stationary erbium dideuteride (ErD2) target. Around 1000 fusion reactions per second took place, each resulting in the production of an 820 keV helium-3 nucleus and a 2.45 MeV neutron. The team anticipates applications of the device as a neutron generator or possibly in microthrusters for space propulsion.

A team at Rensselaer Polytechnic Institute, led by Dr. Yaron Danon and his graduate student Jeffrey Geuther, improved upon the UCLA experiments using a device with two pyroelectric crystals and capable of operating at non-cryogenic temperatures.[5][6]

Nuclear D-D fusion driven by pyroelectric crystals was proposed by Naranjo and Putterman in 2002.[7] It was also discussed by Brownridge and Shafroth in 2004.[8] The possibility of using pyroelectric crystals in a neutron production device (by D-D fusion) was proposed in a conference paper by Geuther and Danon in 2004[9] and later in a publication discussing electron and ion acceleration by pyroelectric crystals.[10] None of these later authors had prior knowledge of the earlier 1997 experimental work conducted by Dougar Jabon, Fedorovich, and Samsonenko.[2] The key ingredient of using a tungsten needle to produce sufficient ion beam current for use with a pyroelectric crystal power supply was first demonstrated in the 2005 Nature paper, although in a broader context tungsten emitter tips have been used as ion sources in other applications for many years. In 2010 it was found that tungsten emitter tips are not necessary to increase the acceleration potential of pyroelectric crystals; the acceleration potential can allow positive ions to reach kinetic energies between 300 and 310 keV.[11]

Pyroelectric fusion has been hyped in the news media,[12] which has overlooked the earlier experimental work of Dougar Jabon, Fedorovich and Samsonenk.[2] Pyroelectric fusion is not related to the earlier claims of fusion reactions, having been observed during sonoluminescence (bubble fusion) experiments conducted under the direction of Dr. Rusi P. Taleyarkhan of Purdue University.[13] In fact, Naranjo of the UCLA team has been one of the main critics of these earlier prospective fusion claims from Taleyarkhan.[14]

The first successful results with pyroelectric fusion using a tritiated target was reported in 2010.[15] The UCLA team of Putterman and Naranjo worked with Dr. T. Venhaus of Los Alamos National Laboratory to measure a 14.1 MeV neutron signal far above background. This was a natural extension of the earlier work with deuterated targets.

See also

Notes

References

  1. Sidney Lang, "Pyroelectricity: From Ancient Curiosity to Modern Imaging Tool", Physics Today, August, 2005, pp. 31-36, and Sidney B. Lang, "Sourcebook of Pyroelectricity", (London: Gordon & Breach, 1974)
  2. V. D. Dougar Jabon, G. V. Fedorovich, and N. V. Samsonenko, "Catalitically Induced D-D Fusion in FerroelectricsPDF", Brazilian Journal of Physics, Vol. 27, No. 4 (December, 1997), pp. 515-521
  3. B. Naranjo, J. K. Gimzewski and S. Putterman (from UCLA), "Observation of nuclear fusion driven by a pyroelectric crystal". Nature, April 28, 2005. See also a news article on this.
  4. Brian Naranjo, "Observation of Nuclear Fusion Driven by a Pyroelectric Crystal", A disssertation submitted in partial satisfaction of the requirements for the degree Doctor of Philosophy in Physics, University of California, Los Angeles, 2006, 57 pages, Dr. Seth Putterman, Committee Chair. No reference to the earlier experimental work of Jabon, Fedorovich and Samsonenk [2] is found in Dr. Naranjo's dissertation.
  5. Jeffrey A. Geuther, Yaron Danon “Electron and Positive Ion Acceleration with Pyroelectric Crystals”, Journal of Applied Physics 97, 074109 (April 1, 2005)
  6. Jeffrey A. Geuther, "Radiation Generation with Pyroelectric Crystals", A Thesis submitted to the Graduate Faculty of Rensselaer Polytechnic Institute in Partial Fulfillment of the Requirements for the degree of Doctor of Philosophy in Nuclear Engineering and Science, Rensselaer Polytechnic Institute, Troy, New York, April 13, 2007, 176 pages, Dr. Yaron Danon, Thesis Adviser.
  7. B. Naranjo and S. Putterman "Search for fusion from energy focusing phenomena in ferroelectric crystals". UCEI Proposal, February 1, 2002
  8. James D. Brownridge and Stephen M. Shafroth, [1], 1 May 2004
  9. Jeffrey A. Geuther, Yaron Danon, “Pyroelectric Electron Acceleration: Improvements and Future Applications”, ANS Winter Meeting Washington, D.C, November 14 – 18, 2004
  10. "Double Crystal Fusion" Could Pave the Way for Portable Device, News Releases, Rensselaer Polytechnic Institute: 2005-2006: "NY Team Confirms UCLA Tabletop Fusion". www.scienceblog.com
  11. W. Tornow, S. M. Lynam, and S. M. Shafroth, "Substantial increase in acceleration potential of pyroelectric crystals", Journal of Applied Physics, Vol. 107, 063302 (2010)
  12. Matin Durrani and Peter Rodgers "Fusion seen in table-top experiment". Physics Web, April 27, 2005
  13. Rusi P. Taleyarkhan, C. D. West, R. T. Lahey, R. I. Nigmatulin, J. S. Cho, R. C. Block, and Y. Xu, "Nuclear Emissions During Self-Nucleated Acoustic Cavitation". Physical Review Letters, Vol. 96, 034301 (January 2006)
  14. Brian Naranjo, "Comment on 'Nuclear Emissions During Self-Nucleated Acoustic Cavitation'", Physical Review Letters, Vol. 97, 149403 (3 October 2006)
  15. B. Naranjo, S. Putterman and T. Venhaus, "Pyroelectric fusion using a tritiated target", Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 632, Issue 1, (11 March 2011), pp. 43-46.

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

  • Pyroelectric crystal — Pyroelectric crystals are crystals that generate electricity when heated. It is similar to piezoelectricity.Crystal symmetryCrystal structures can be divided into 32 classes, or point groups, according to the number of rotational axes and… …   Wikipedia

  • Fusion power — The Sun is a natural fusion reactor. Fusion power is the power generated by nuclear fusion processes. In fusion reactions two light atomic nuclei fuse together to form a heavier nucleus (in contrast with fission power). In doing so they release a …   Wikipedia

  • Nuclear fusion — Nuclear physics Radioactive decay Nuclear fission Nuclear fusion Classical dec …   Wikipedia

  • Cold Fusion (disambiguation) — Cold Fusion may refer to: In science Cold fusion, a type of purported nuclear reaction at low energies or temperatures. Muon catalyzed fusion, an accepted phenomenon, was sometimes called cold fusion. Pyroelectric fusion, first achieved in 2005,… …   Wikipedia

  • Muon-catalyzed fusion — This article refers to the original use of the term cold fusion. For the controversial experiments known as cold fusion, see Cold fusion. For other uses, see Cold Fusion (disambiguation). Muon catalyzed fusion (μCF) is a process allowing nuclear… …   Wikipedia

  • Magnetized target fusion — (MTF) is a relatively new approach to producing fusion power that combines features of the more widely studied magnetic confinement fusion (MCF) and inertial confinement fusion (ICF) approaches. Like the magnetic approach, the fusion fuel is… …   Wikipedia

  • Magnetic confinement fusion — TCV inner view, with graphite clad torus Magnetic confinement fusion is an approach to generating fusion power that uses magnetic fields to confine the hot fusion fuel in the form of a plasma. Magnetic confinement is one of two major branches of… …   Wikipedia

  • Pyroelectricity — is the ability of certain materials to generate an electrical potential when they are heated or cooled. As a result of this change in temperature, positive and negative charges move to opposite ends through migration (i.e., the material becomes… …   Wikipedia

  • Neutron generator — Neutron generators are neutron source devices which contain compact linear accelerators and that produce neutrons by fusing isotopes of hydrogen together. The fusion reactions take place in these devices by accelerating either deuterium, tritium …   Wikipedia

  • Lithium tantalate — Chembox new Name = Lithium tantalate ImageFile = ImageName = IUPACName = Lithium tantalate OtherNames = Lithium Metatantalate Section1 = Chembox Identifiers CASNo = 12031 66 2 RTECS = Section2 = Chembox Properties Formula = LiTaO3 MolarMass = ?… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”