Dust abatement

Dust abatement refers to the process of inhibiting the creation of excess soil dust, a pollutant that contributes to excess levels of particulate matter.

Frequently employed by local governments of arid climates such as those in the Southwest United States, dust abatement procedures may also be required in private construction as a condition of obtaining a building permit.

Dust abatement methods include the regular spraying of water on loose dirt in construction sites, the paving of or applying magnesium chloride to dirt roads, and restricting access to dusty areas.

Abatement oil (an organic, lubricating and penetrating oil) most commonly used to remove debris such as dust and asbestos. Application of this product is normally done by lathering onto the surface and then removing with a clean dry cloth.

See also

• Air pollution

References

• Bolander, Peter and Yamada, Alan (November 1999). "Dust Palliative Selection and Application Guide". San Dimas Technology and Development Center - United States Forest Service. http://www.airquality.nrcs.usda.gov/Documents/USFS_DustGuide.pdf. 
• Kestler, Maureen (March 2009). "Stabilization Selection Guide for Aggregate and Native-Surfaced Low Volume Roads". San Dimas Technology and Development Center - United States Forest Service. http://www.fs.fed.us/eng/pubs/pdf/08771805.pdf. 
• Yamada, Alan (December 1998). "Dust Suppressants For Temporary Helicopter Landing Areas". Aviation Management Tech Tips (San Dimas Technology and Development Center - United States Forest Service). http://www.fs.fed.us/eng/pubs/html/98571319/98571319.html.