Artarmon railway station, Sydney

Artarmon railway station, Sydney

Artarmon is a CityRail railway station on the North Shore railway line in Sydney, Australia, in the residential suburb of Artarmon.

The rail line cuts through the middle of Artarmon, with only limited road access between the two sides. The platform is raised approximately two metres above street level due to the slope of land near the station. Two pedestrian tunnels cross under the rail line, with access to the station available via stairs from the larger tunnel.

The limited width of the station means that there are no automatic ticket barriers. Passengers must walk to the ticket machines and ticket counter in the middle of the platform to purchase a ticket.

Platforms/Service

The station is served by four trains per hour most of the time, with additional trains at peak hours. Originally, not all trains on the North Shore Line stopped at Artarmon, with some "fast" trains skipping from Chatswood directly to St Leonards and then on to North Sydney. In the 2006 timetable, most trains now stop at Artarmon due to its high patronage.

Platform 1:
*North Shore line colour>North Shore Line - all stations and limited stops services, and peak hour intercity services to Central; then to Blacktown, Penrith, Emu Plains, Riverstone, or Richmond via the North Shore line colour>Western Line, or to Eastwood or Hornsby via the Northern line colour>Northern Line

Platform 2
*North Shore line colour>North Shore Line - all stations and limited stops services to Lindfield, Gordon, Hornsby & Berowra; peak hour intercity services to Gosford and Wyong.

Accessibility

As the platform is connected to the underpass leading to the adjacent streets by stairs, Easy Access for wheelchairs is not available.

Transport Links

NightRide route N90 serves Artarmon(Hampdon Road nr Francis Road).

Trackplan


Neighbouring stations

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужен реферат?

Look at other dictionaries:

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”