- Cyrix III
-
Cyrix III 
Produced From February 2000 to Early 2001 Common manufacturer(s) - Cyrix
Max. CPU clock rate 350 MHz to 800 MHz FSB speeds 100 to 133 Min. feature size 0.18 to 0.15 Instruction set x86 Socket(s) - Socket 370
Core name(s) - Joshua
- Samuel (C5A)
- Samuel 2 (C5B)
Cyrix III is an x86-compatible Socket 370 CPU. VIA Technologies launched the processor in February 2000. VIA had recently purchased both Centaur Technology and Cyrix. Cyrix III was to be based upon a core from one of the two companies.
Contents
CPU cores
Joshua
The pre-release Cyrix III CPUs were based upon a 22 million transistor Joshua core designed by Cyrix.[1] This CPU core was a typical Cyrix design: superscalar with speculative execution and a high IPC rate but rather low clock rates. To emphasize the higher performance of their designs compared to the competitors' offerings, Cyrix used a system with a "P-Rating" higher than the clock rate. The floating point unit of the processor had supposedly been updated from the lacklustre unit in the 6x86/MII series.[2] When the chip reached reviewers, the weighted integer/floating-point performance was found to be fairly low compared to the competition. The fact that Cyrix 6x86-line were only 486-compatible, not 100% Pentium-compatibile, intensified the negative attention at this point.
Samuel
Because the Joshua core was such a mixed result in thermal output, core size, and performance, VIA switched almost immediately to an 11 million transistor Samuel core designed by Centaur Technology.[3] The Samuel core was a simpler design, being an evolution of the WinChip processors (the unreleased WinChip 4). Samuel was designed for higher clock speeds, with more L1 cache (but no L2), and used smaller manufacturing technology.[4] While this version of Cyrix III still had sub-par performance compared to the competition from Intel and AMD, it was quite power efficient and consisted of only half the number of transistors of Cyrix's creation.[4][5]
VIA dropped the criticized PR rating with new processors based on the Samuel core, in favor of simply distinguishing them by their actual clock speed.
Samuel 2
The Samuel 2 core is a revision to the Samuel core. The Centaur Technology team added an on-die 64 KiB L2 cache and moved to a 150 nm manufacturing process. These changes improved per-clock performance, reduced power demands, and increased clock speed scalability.[5]
Renamed
The VIA Cyrix III was later renamed VIA C3, as it was not built upon Cyrix technology at all.
See also
- List of VIA microprocessors
References
- ^ VIA Cyrix III, CPU Scorecard, October 8, 2005.
- ^ Loki.Joshua, Ars Technica, accessed May 11, 2007.
- ^ Witheiler, Matthew. [1] The New VIA Cyrix III: The Worlds First 0.15 Micron x86 CPU], Anandtech, January 5, 2001.
- ^ a b De Gelas, Johan. Cyrix III, An Alternative Approach, Ace's Hardware, August 6, 2000.
- ^ a b Poluvyalov, Alexander. VIA Cyrix III (Samuel 2) 600 and 667 MHz, Digit Life, accessed May 12, 2007.
External links
- Cyrix III at CPU-World
- IA-32 implementation: VIA Cyrix III
- IA-32 implementation: VIA C3
- VIA Cyrix III (Samuel 2) 600 and 667 MHz
Centaur Technology • Products of VIA Technologies • S3 Graphics VIA chipsets • Cyrix III • VIA C3 • VIA C7 • VIA Nano • VIA QuadCore • VIA Eden • VIA CoreFusion • S3 Savage series • S3 Chrome series • EPIA • VIA EnvyCategories:- Cyrix x86 microprocessors
- VIA Technologies x86 microprocessors
Wikimedia Foundation. 2010.
