Mitigation of seismic motion
- Mitigation of seismic motion
-
Mitigation of seismic motion is an important factor in earthquake engineering and construction in earthquake-prone areas. The destabilizing action of an earthquake on constructions may be direct (seismic motion of the ground) or indirect (earthquake-induced landslides, liquefaction of the foundation soils and waves of tsunami).
Knowledge of local amplification of the seismic motion from the bedrock is very important in order to choose the suitable design solutions. Local amplification can be anticipated from the presence of particular stratigraphic conditions, such as soft soil overlapping the bedrock, or where morphological settings (e.g. crest zones, steep slopes, valleys, or endorheic basins) may produce focalization of the seismic event.
The identification of the areas potentially affected by earthquake-induced landslides and by soil liquefaction can be made by geological survey and by analysis of historical documents. Even quiescent and stabilized landslide areas may be reactivated by severe earthquake. Young soil may be particularly susceptible to liquefaction.
See also
Categories:
- Construction terminology
- Earthquake and seismic risk mitigation
Wikimedia Foundation.
2010.
Look at other dictionaries:
Seismic hazard — refers to the study of expected earthquake ground motions at the earth s surface, and its likely effects on existing natural conditions and man made structures for public safety considerations; the results of such studies are published as seismic … Wikipedia
Seismic retrofit — Seismic retrofitting is the modification of existing structures to make them more resistant to seismic activity, ground motion, or soil failure due to earthquakes. Other retrofit techniques are applicable to areas subject to tropical cyclones,… … Wikipedia
Seismic microzonation — map of Greater Bangkok prepared based on predominant period of site obtained from microtremor observations [1] Main article: Earthquake engineering Seismic microzonation is defined as the process … Wikipedia
Seismic risk — uses the results of a seismic hazard analysis, and includes both consequence and probability. A building located in a region of high seismic hazard is at lower risk if it is built to sound seismic engineering principles. On the other hand, a… … Wikipedia
Fault (geology) — Part of a series on earthquakes Types Foreshock • Aftershock • Blind thrust Doublet • Interplate • … Wikipedia
Earthquake engineering — is the study of the behavior of buildings and structures subject to seismic loading. It is a subset of both structural and civil engineering.The main objectives of earthquake engineering are: * Understand the interaction between buildings or… … Wikipedia
Earth Sciences — ▪ 2009 Introduction Geology and Geochemistry The theme of the 33rd International Geological Congress, which was held in Norway in August 2008, was “Earth System Science: Foundation for Sustainable Development.” It was attended by nearly… … Universalium
Outline of energy — See also: Index of energy articles In physics, energy (from the Greek ἐνέργεια – energeia, activity, operation , from ἐνεργός – energos, active, working [1]) is a scalar physical quantity that describes the amount of work that can be performed by … Wikipedia
Glacier — This article is about the geological formation. For other uses, see Glacier (disambiguation). The Baltoro Glacier in the Karakoram, Kashmir, Northern Pakistan. At 62 kilometres (39 mi) in length, it is one of the longest alpine glaciers on… … Wikipedia
Diablo Canyon earthquake vulnerability — Diablo Canyon (Nuclear) Power Plant, located on the water s edge in San Luis Obispo County California, was originally designed to withstand a 6.75 magnitude earthquake from four faults, including the nearby San Andreas and Hosgri faults,[1] but… … Wikipedia
