Surface weather analysis

Surface weather analysis

A surface weather analysis is a special type of weather map that provides a view of weather elements over a geographical area at a specified time based on information from ground-based weather stations. ["Air Apparent: How Meteorologists Learned to Map, Predict, and Dramatize Weather." University of Chicago Press. Chicago: 1999.] Weather maps are created by plotting or tracing the values of relevant quantities such as sea level pressure, temperature, and cloud cover onto a geographical map to help find synoptic scale features such as weather fronts.

The first weather maps in the 19th century were drawn well after the fact to help devise a theory on storm systems.Eric R. Miller. [ American Pioneers in Meteorology.] Retrieved on 2007-04-18.] After the advent of the telegraph, simultaneous surface weather observations became possible for the first time, and beginning in the late 1840s, the Smithsonian Institution became the first organization to draw real-time surface analyses. Use of surface analyses began first in the United States, spreading worldwide during the 1870s. Use of the Norwegian cyclone model for frontal analysis began in the late 1910s across Europe, with its use finally spreading to the United States during World War II.

Surface weather analyses have special symbols which show frontal systems, cloud cover, precipitation, or other important information. For example, an "H" may represent high pressure, implying good and fair weather. An "L" on the other hand may represent low pressure, which frequently accompanies precipitation. Various symbols are used not just for frontal zones and other surface boundaries on weather maps, but also to depict the present weather at various locations on the weather map. Areas of precipitation help determine the frontal type and location.

History of surface analysis


thumb|upright|Surface_analysis_of_Great Blizzard of 1888 on March 12, 1888 at 10 pm]

The use of weather charts in a modern sense began in the middle portion of the 19th century in order to devise a theory on storm systems. [Human Intelligence. [ Francis Galton.] Retrieved on 2007-04-18.] The development of a telegraph network by 1845 made it possible to gather weather information from multiple distant locations quickly enough to preserve its value for real-time applications. The Smithsonian Institution developed its network of observers over much of the central and eastern United States between the 1840s and 1860s once Joseph Henry took the helm. [Frank Rives Millikan. Smithsonian Institution. [ Joseph Henry: Father of the Weather Service.] Retrieved on 2006-10-22.] The U.S. Army Signal Corps inherited this network between 1870 and 1874 by an act of Congress, and expanded it to the west coast soon afterwards.

At first, all the data on the map was not taken from these analyses because of a lack of time standardization. The first attempts at time standardization took hold in Great Britain by 1855. The entire United States did not finally come under the influence of time zones until 1905, when Detroit finally established standard time. [WebExhibits. [ Daylight Saving Time] . Retrieved on 2007-06-24.] Internationally, other countries followed the lead of the United States in taking simultaneous weather observations, starting in 1873. [NOAA. [ An Expanding Presence.] Retrieved on 2007-05-05.] Other countries then began preparing surface analyses. The use of frontal zones on weather maps did not appear until the introduction of the Norwegian cyclone model in the late 1910s, despite Loomis' earlier attempt at a similar notion in 1841. [David M. Schultz. " [ Perspectives on Fred Sanders's Research on Cold Fronts] ", 2003, revised, 2004, 2006, p. 5. Retrieved on 2006-07-14.] Since the leading edge of air mass changes bore resemblance to the military fronts of World War I, the term "front" came into use to represent these lines. [Bureau of Meteorology. [ Air Masses and Weather Maps.] Retrieved on 2006-10-22.]

Despite the introduction of the Norwegian cyclone model just after World War I, the United States did not formally analyze fronts on surface analyses until late 1942, when the WBAN Analysis Center opened in downtown Washington, D.C.. [Hydrometeorological Prediction Center. [ A Brief History of the Hydrometeorological Prediction Center.] Retrieved on 2007-05-05.] The effort to automate map plotting began in the United States in 1969, [ESSA. [ Prospectus for an NMC Digital Facsimile Incoder Mapping Program.] Retrieved on 2007-05-05.] with the process complete in the 1970s. Hong Kong completed their process of automated surface plotting by 1987. [Hong Kong Observatory. [ The Hong Kong Observatory Computer System and Its Applications.] Retrieved on 2007-05-05.] By 1999, computer systems and software had finally become sophisticated enough to allow for the ability to underlay on the same workstation satellite imagery, radar imagery, and model-derived fields such as atmospheric thickness and frontogenesis in combination with surface observations to make for the best possible surface analysis. In the United States, this development was achieved when Intergraph workstations were replaced by n-AWIPS workstations. [Hydrometeorological Prediction Center. [ Hydrometeorological Prediction Center 1999 Accomplishment Report.] Retrieved on 2007-05-05.] By 2001, the various surface analyses done within the National Weather Service were combined into the Unified Surface Analysis, which is issued every six hours and combines the analyses of four different centers.David Roth. Hydrometeorological Prediction Center. [ Unified Surface Analysis Manual.] Retrieved on 2006-10-22.] Recent advances in both the fields of meteorology and geographic information systems have made it possible to devise finely tailored products that take us from the traditional weather map into an entirely new realm. Weather information can quickly be matched to relevant geographical detail. For instance, icing conditions can be mapped onto the road network. This will likely continue to lead to changes in the way surface analyses are created and displayed over the next several years. [Saseendran S. A., Harenduprakash L., Rathore L. S. and Singh S. V. [ A GIS application for weather analysis and forecasting.] Retrieved on 2007-05-05.]

tation model used on weather maps

Station model plotted on surface weather analyses]

When analyzing a weather map, a station model is plotted at each point of observation. Within the station model, the temperature, dewpoint, wind, sea level pressure, pressure tendency, and ongoing weather are plotted. [National Weather Service. [ Model Example.] Retrieved on 2007-04-29.] The circle in the middle represents cloud cover. If completely filled in, it is overcast. If conditions are completely clear, the circle is empty. If conditions are partly cloudy, the circle is partially filled in. [Dr Elizabeth R. Tuttle. [ Weather Maps.] Retrieved on 2007-05-10.] Outside the United States, temperature and dewpoint are plotted in degrees Celsius. Each full flag on the Wind Barb represents convert|10|kn|km/h|0 of wind, each half flag represents convert|5|kn|km/h|0. When winds reach convert|50|kn|km/h|0, a filled in triangle is used for each convert|50|kn|km/h|0 of wind. [American Meteorological Society. [ Selected DataStreme Atmosphere Weather Map Symbols.] Retrieved on 2007-05-10.] In the United States, rainfall plotted in the corner of the station model are in English units, inches. Internationally, the standard rainfall measurement unit is the millimeter. Once a map has a field of station models plotted, the analyzing isobars (lines of equal pressure), isallobars (lines of equal pressure change), isotherms (lines of equal temperature), and isotachs (lines of equal wind speed) can be easily accomplished. [CoCoRAHS. [ INTRODUCTION TO DRAWING ISOPLETHS.] Retrieved on 2007-04-29.] The abstract present weather symbols used on surface weather analyses for obstructions to visibility, precipitation, and thunderstorms were devised to take up the least room possible on weather maps.

ynoptic scale features

A synoptic scale feature is one whose dimensions are large in scale, more than several hundred kilometers in length. [Glossary of meteorology. [ Synoptic scale.] Retrieved on 2007-05-10. ] Migratory pressure systems and frontal zones exist on this scale.

Pressure centers

Centers of surface high and low pressure areas are found within closed isobars on a surface weather analysis where there the absolute maxima and minima in the pressure field, and can tell a user in a glance what the general weather is in their vicinity. Weather maps in English-speaking countries will depict their highs as Hs and lows as Ls, [Weather Doctor. [ Weather's Highs and Lows: Part 1 The High.] ] while Spanish-speaking countries will depict their highs as As and lows as Bs. [Instituto Nacional de Meteorologia. [ Meteorologia del Aeropuerto de la Palma.] Retrieved on 2007-05-05.]

Low pressure

Low pressure systems, also known as cyclones, are located in minima in the pressure field. Rotation is inward and counterclockwise in the northern hemisphere as opposed to inward and clockwise in the southern hemisphere due to the coriolis force. Weather is normally unsettled in the vicinity of a cyclone, with increased cloudiness, increased winds, increased temperatures, and upward motion in the atmosphere which leads to an increased chance of precipitation. Polar lows can form over relatively mild ocean waters when cold air sweeps in from the ice cap, leading to upward motion and convection, usually in the form of snow. Tropical cyclones and winter storms are intense varieties of low pressure. Over land, thermal lows are indicative of hot weather during the summer. [BBC Weather. [ Weather Basics - Low Pressure.] Retrieved on 2007-05-05.]

High pressure

High pressure systems, also known as anticyclones, rotate outward and clockwise in the northern hemisphere as opposed to outward and counterclockwise in the southern hemisphere. Under surface highs, sinking motion leads to skies that are clearer, winds that are lighter, and there is a reduced chance of precipitation. [BBC Weather. [ High Pressure.] Retrieved on 2007-05-05.] There is normally a greater range between high and low temperature due to the drier air mass present. If high pressure persists, air pollution will build up due to pollutants trapped near the surface caused by the subsiding motion associated with the high. [United Kingdom School System. [ Pressure, Wind and Weather Systems.] Retrieved on 2007-05-05.]


Fronts in meteorology are the leading edges of air masses with different density (e.g., air temperature and/or humidity). When a front passes over an area, it is marked by changes in temperature, moisture, wind speed and direction, atmospheric pressure, and often a change in the precipitation pattern. Cold fronts are closely associated with low pressure systems, normally lying at the leading edge of high pressure systems and, in the case of the polar front, at approximately the equatorward edge of the high-level polar jet. Fronts are guided by winds aloft, but they normally move at lesser speeds. In the northern hemisphere, they usually travel from some west to east direction (even though they can move in a more north-south direction as well). Movement is due to the pressure gradient force (horizontal differences in atmospheric pressure) and the Coriolis effect, caused by the earth spinning about its axis. Frontal zones can be contorted by geographic features like mountains and large bodies of water.

Cold front

A cold front's location is at the leading edge of the temperature drop off, which in an isotherm analysis shows up as the leading edge of the isotherm gradient, and it normally lies within a sharp surface trough. Cold fronts can move up to twice as fast as warm fronts and produce sharper changes in weather, since cold air is denser than warm air and rapidly replaces the warm air preceding the boundary. Cold fronts are typically accompanied by a narrow band of showers and thunderstorms. On weather maps, the surface position of the cold front is marked with the symbol of a blue line of triangles/spikes (pips) pointing in the direction of travel, and it is placed at the leading edge of the cooler air mass.

Warm front

Warm fronts are at the leading edge of the temperature drop off, which is located on the equatorward edge of the gradient in isotherms, and lie within broader troughs of low pressure than cold fronts. Warm fronts move more slowly than the cold front that usually follows because cold air is denser, and harder to displace from the earth's surface. This also forces temperature differences across warm fronts to be broader in scale. Clouds ahead of the warm front are mostly stratiform and rainfall gradually increases as the front approaches. Fog can also occur preceding a warm frontal passage. Clearing and warming is usually rapid after frontal passage. If the warm air mass is unstable, thunderstorms may be embedded among the stratiform clouds ahead of the front, and after frontal passage, thundershowers may continue. On weather maps, the surface location of a warm front is marked with a red line of half circles pointing in the direction of travel.

Occluded front

that may be found on a weather

An occluded front is formed during the process of cyclogenesis when a cold front overtakes a warm front. [University of Illinois. [ Occluded Front.] Retrieved on 2006-10-22.] The cold and warm fronts curve naturally poleward into the point of occlusion, which is also known as the triple point in meteorology. [National Weather Service Office, Norman, Oklahoma. [ Triple Point.] Retrieved on 2006-10-22.] It lies within a sharp trough, but the air mass behind the boundary can be either warm or cold. In a cold occlusion, the air mass overtaking the warm front is cooler than the cool air ahead of the warm front, and plows under both air masses. In a warm occlusion, the air mass overtaking the warm front is not as cool as the cold air ahead of the warm front, and rides over the colder air mass while lifting the warm air. A wide variety of weather can be found along an occluded front, with thunderstorms possible, but usually their passage is associated with a drying of the air mass. Occluded fronts are indicated on a weather map by a purple line with alternating half-circles and triangles pointing in direction of travel. Occluded fronts usually form around mature low pressure areas.

tationary fronts and shearlines

A stationary front is a non-moving boundary between two different air masses, neither of which is strong enough to replace the other. They tend to remain in the same area for long periods of time, usually moving in waves. [University of Illinois. [ Stationary Front.] Retrieved on 2006-10-22.] There is normally a broad temperature gradient behind the boundary with more widely spaced isotherm packing. A wide variety of weather can be found along a stationary front, but usually clouds and prolonged precipitation are found there. Stationary fronts will either dissipate after several days or devolve into shear lines, but can change into a cold or warm front if conditions aloft change. Stationary fronts are marked on weather maps with alternating red half-circles and blue spikes pointing in opposite directions, indicating no significant movement.

When stationary fronts become smaller in scale, degenerating to a narrow zone where wind direction changes over a short distance, they become known as shear lines. [Glossary of Meteorology. [ Shear Line.] Retrieved on 2006-10-22.] If the shear line becomes active with thunderstorms, it may support formation of a tropical storm or a regeneration of the feature back into a stationary front. A shear line is depicted as a line of red dots and dashes.

Mesoscale features

Mesoscale features are smaller than synoptic scale systems like fronts, but larger than storm-scale systems like thunderstorms. Horizontal dimensions generally range from around 50 milesvague|which miles? we are using knots for wind speed above.|date=March 2008 to several hundred miles. [Fujita, T. T., 1986. "Mesoscale classifications: their history and their application to forecasting." Mesoscale Meteorology and Forecasting. American Meteorological Society, Boston, p. 18–35.]

Dry line

The dry line is the boundary between dry and moist air masses east of mountain ranges with similar orientation to the Rockies, depicted at the leading edge of the dew point, or moisture, gradient. Near the surface, warm moist air is denser than dry air of greater temperature, and thus the warm moist air wedges under the drier air like a cold front. [Huaqing Cai. [ Dryline cross section.] Retrieved on 2006-12-05.] At higher altitudes, the warm moist air is less dense than the cooler, drier air and the boundary slope reverses. In the vicinity of the reversal aloft, severe weather is possible, especially when a triple point is formed with a cold front.

During daylight hours, drier air from aloft drifts down to the surface, causing an apparent movement of the dryline eastward. At night, the boundary reverts back to the west as there is no longer any sunshine to help mix the lower atmosphere. [Lewis D. Grasso. [ A Numerical Simulation of Dryline Sensitivity to Soil Moisture.] Retrieved on 2007-05-10.] If enough moisture converges upon the dryline, it can be the focus of afternoon and evening thunderstorms. [Glossary of Meteorology. [ Lee Trough.] Retrieved on 2006-10-22.] A dry line is depicted on United States surface analyses as a brown line with scallops, or bumps, facing into the moist sector. Dry lines are one of the few surface fronts where the special shapes along the drawn boundary do not necessarily reflect the boundary's direction of motion. [University of Illinois. [ Dry Line: A Moisture Boundary.] Retrieved on 2006-10-22.]

Outflow boundaries and squall lines

Organized areas of thunderstorm activity not only reinforce pre-existing frontal zones, but they can outrun cold fronts. This outrunning occurs in a pattern where the upper level jet splits into two streams. The resultant mesoscale convective system (MCS) forms at the point of the upper level split in the wind pattern in the area of best low level inflow. The convection then moves east and equatorward into the warm sector, parallel to low-level thickness lines. When the convection is strong and linear or curved, the MCS is called a squall line, with the feature placed at the leading edge of the significant wind shift and pressure rise. [Office of the Federal Coordinator for Meteorology. [ Chapter 2: Definitions.] Retrieved on 2006-10-22.] Even weaker and less organized areas of thunderstorms will lead to locally cooler air and higher pressures, and outflow boundaries exist ahead of this type of activity, whd "SQLN" or "SQUALL LINE", while outflow boundaries are depicted as troughs with a label of "OUTFLOW BOUNDARY" or "OUTFLOW BNDRY".

ea and land breeze fronts

sea breeze]

Sea breeze fronts occur mainly on sunny days when the landmass warms up above the water temperature. Similar boundaries form downwind on lakes and rivers during the day, as well as offshore landmasses at night. Since the specific heat of water is so high, there is little diurnal change in bodies of water, even on the sunniest days. The water temperature varies less than 1 °C (1 to 2 °F). By contrast, the land, with a lower specific heat, can vary several degrees in a matter of hours.Glossary of Meteorology. [ Sea Breeze.] Retrieved on 2006-10-22.]

During the afternoon, air pressure decreases over the land as temperature rises. The relatively cooler air over the sea rushes in to fill the gap. The result is a relatively cool onshore wind. This process usually reverses at night where the water temperature is higher relative to the landmass, leading to an offshore land breeze. However, if water temperatures are colder than the land at night, the sea breeze may continue, only somewhat abated. This is typically the case along the California coast, for example.

If enough moisture exists, thunderstorms can form along sea breeze fronts which then can send out outflow boundaries. This causes chaotic wind/pressure regimes if the steering flow is light. Like all other surface features, sea breeze fronts lie inside troughs of low pressure.

ee also

*American Practical Navigator
*Extratropical cyclone
*Synoptic scale
*Weather fronts
*Weather map


External links

* [ "The Mid-Latitude Cyclone"]
* [ Norwegian Cyclone Model — NWS]
* [ Unified Surface Analysis Manual — NWS]
* [ Unified Surface Analysis — NWS]
* [ Glossary of Meteorology]
* [ Cold Front Page]
* [ Diana : A Free Meteorological Visualisation Tool]

Wikimedia Foundation. 2010.

Игры ⚽ Нужна курсовая?

Look at other dictionaries:

  • History of surface weather analysis — The history of surface weather analysis concerns the timetable of developments related to surface weather analysis. Initially a tool of study for the behavior of storms, surface weather analyses became a work in progress to explain current… …   Wikipedia

  • Surface weather observation — Surface weather observations are the fundamental data used for safety as well as climatological reasons to forecast weather and issue warnings worldwide. [Office of the Federal Coordinator of Meteorology. [ 1/pdf/B CH2.pdf… …   Wikipedia

  • Weather forecasting — weather forecaster redirects here. For other uses, see Weatherman (disambiguation). Forecast of surface pressures five days into the future for the north Pacific, North America, and north Atlantic ocean. Weather forecasting is the application of… …   Wikipedia

  • Weather map — A surface weather analysis for the United States on October 21, 2006. A weather map displays various meteorological features across a particular area at a particular point in time.[1] Such maps have been in use since the mid 19th century and are… …   Wikipedia

  • Weather front — A weather front is a boundary separating two masses of air of different densities, and is the principal cause of meteorological phenomena. In surface weather analyses, fronts are depicted using various colored lines and symbols, depending on the… …   Wikipedia

  • weather forecasting — Prediction of the weather through application of the principles of physics and meteorology. Weather forecasting predicts atmospheric phenomena and changes on the Earth s surface caused by atmospheric conditions (snow and ice cover, storm tides,… …   Universalium

  • Weather ship — The weather ship MS Polarfront at sea. A weather ship was a ship stationed in the ocean as a platform for surface and upper air meteorological observations for use in weather forecasting. They were primarily located in the north Atlantic and… …   Wikipedia

  • Weather buoy — operated by the NOAA National Data Buoy Center Weather buoys are instruments which collect …   Wikipedia

  • Weather radar — in Norman, Oklahoma with rainshaft …   Wikipedia

  • Sea surface temperature — Weekly average sea surface temperature for the World Ocean during the first week of February 2011, during a period of La Niña …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”