Aniline leather

Aniline leather is a type of leather dyed exclusively with soluble dyes without covering the surface with a topcoat paint or insoluble pigments. The resulting product retains the hide's natural surface with the 'grain', i.e. visible pores, scars etc. of the complete original animal's skin structure.

Aniline leather is not dyed with poisonous aniline.^{[citation needed]} Originally, the dyes used for this process were synthesized from aniline through chemical reactions.^{[citation needed]} These dyes used to be called 'aniline dyes' or 'tar dyes'.^{[citation needed]} In modern times, the dyes used are subject to laws and regulations in many countries, and the use of certain azo compounds is prohibited as there are reasons to assume health risks.^{[citation needed]}

Typically, leather is dyed both for aesthetic reasons and to conceal blemishes. The dye colours leather without producing the uniform surface of pigmented leather. Any visible variations on the surface of the undyed leather such as natural blemishes will remain visible. ^[1]

There are different kinds of aniline leather, but the same kinds of dyes are used in the process. The dyes used are clear and transparent chemicals that allow the grain structure of the leather to be seen. These dyes show the natural texture, but do not protect the leather from damage.

Aniline leather may be referred to as full aniline or full sauvage leather to differentiate between this dye treatment and variants. Semi-aniline leather is produced through a very similar process to full-aniline, but has a thin protective top coat added to protect it from wear and staining. Pull up aniline leather has additional oil or wax applied to the leather to give it a distressed look.

^[2][3]

References

1. ^ "About Leather", Roden Leather Company
2. ^ "Leather types", Leather Care Master
3. ^ "A Guide to Leather Upholstery", Monique Stern, The Furniture Collection