Curing (chemistry)

Curing (chemistry)

Curing is a term in polymer chemistry and process engineering that refers to the toughening or hardening of a polymer material by cross-linking of polymer chains, brought about by chemical additives, ultraviolet radiation, electron beam or heat. In rubber, the curing process is also called vulcanization.

Resin curing

Despite the wide variety of thermoset resin formulations (epoxy, vinylester, polyester, etc.), their cure behavior is qualitatively identical. The resin viscosity drops initially upon the application of heat, passes through a region of maximum flow and begins to increase as the chemical reactions increase the average length and the degree of cross-linking between the constituent oligomers. This process continues until a continuous 3-dimensional network of oligomer chains is created – this stage is termed gelation. In terms of processability of the resin this marks an important watershed: before gelation the system is relatively mobile, after it the mobility is very limited, the micro-structure of the resin and the composite material is fixed and severe diffusion limitations to further cure are created. Thus in order to achieve vitrification in the resin, it is usually necessary to increase the process temperature after gelation. Cure monitoring methods give a significant insight to the chemical process and define process actions towards achieving specific quality indices of the cured resin systems.

See also

  • Concrete curing
  • Curing time

References


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать курсовую

Look at other dictionaries:

  • Organotin chemistry — Organotin compounds are those with tin linked to hydrocarbons. Organotin compounds or stannanes are chemical compounds based on tin with hydrocarbon substituents. Organotin chemistry is part of the wider field of organometallic chemistry.[1] The… …   Wikipedia

  • Retarder (chemistry) — A retarder is a chemical agent that slows down a chemical reaction. For example, retarders are used to slow the chemical hardening of plastic materials such as wallboard, concrete, and adhesives.Sugar water acts as a retarder for the curing of… …   Wikipedia

  • Paint Chemistry —    paint a suspension pigment in an oil vehicle. It applies to virtually any surface coating designed for protection of a surface or for decoration, or both. Sometimes the word paint may be a general term and the term “surface coating” is more… …   Forensic science glossary

  • Cure (disambiguation) — A cure is a completely effective treatment for a disease. The Cure is an English rock band. Cure, or similar, may also refer to: Contents 1 Film and television 2 Music …   Wikipedia

  • Coating — is a covering that is applied to the surface of an object, usually referred to as the substrate. In many cases coatings are applied to improve surface properties of the substrate, such as appearance, adhesion, wetability, corrosion resistance,… …   Wikipedia

  • Coating and printing processes — involve the application of a thin film of functional material to a substrate, such as roll of paper, fabric, film or other textile. The coating or printing can be applied to serve some sort of function (e.g. water proofing) or just for decoration …   Wikipedia

  • surface coating — ▪ chemistry Introduction       any mixture of film forming materials plus pigments, solvents, and other additives, which, when applied to a surface and cured or dried, yields a thin film that is functional and often decorative. Surface coatings… …   Universalium

  • Tanning — For other uses, see Tanning (disambiguation). For human tanning, see Sun tanning. Tannery redirects here. For other uses, see Tannery (disambiguation). Tanned leather in Marrakech …   Wikipedia

  • elastomer — elastomeric /i las teuh mer ik/, adj. /i las teuh meuhr/, n. Chem. an elastic substance occurring naturally, as natural rubber, or produced synthetically, as butyl rubber or neoprene. [1935 40; ELAST(IC) + O + Gk méros a part] * * * ▪ chemical… …   Universalium

  • radiation — radiational, adj. /ray dee ay sheuhn/, n. 1. Physics. a. the process in which energy is emitted as particles or waves. b. the complete process in which energy is emitted by one body, transmitted through an intervening medium or space, and… …   Universalium

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”