List of IEC standards

In order to distinguish standards published by the International Electrotechnical Commission numerically from other international standards, their number range was shifted in 1997 by adding 60000. So what used to be called IEC 27 is now officially IEC 60027, and so on. However, the old numbers remain commonly used. [http://www.iec.ch/webstore/custserv/faqs/faqs_about.htm#11]

This is an incomplete list of IEC standards that includes many of the more widely known and used ones, with a particular emphasis on those that are discussed in Wikipedia articles:

* IEC 60027 Letter symbols to be used in electrical technology...
* IEC 60034 Rotating electrical machinery
* IEC 60038 IEC Standard Voltages
* IEC 60044 Instrument transformers
** IEC 60044-1 Current transformers
* IEC 60050 International electrotechnical vocabulary
* IEC 60062 Marking codes for resistors and capacitors
* IEC 60063 Preferred number series for resistors and capacitors
* IEC 60065 Audio, video and similar electronic apparatus - Safety requirements
* IEC 60068 Environmental Testing
* IEC 60073 Basic Safety principles for man-machine interface, marking and identification
* IEC 60076 Power Transformers
* IEC 60079 Parts 1-14 Electrical Installations in Hazardous Areas
* IEC 60085 Electrical insulation
* IEC 60086 Primary batteries
** IEC 60086-3 Watch batteries
* IEC 60094 Magnetic tape sound recording and reproducing systems
** IEC 60094-5 Electrical magnetic tape properties
** IEC 60094-6 Reel-to-reel systems
** IEC 60094-7 Cassette for commercial tape records and domestic use
* IEC 60096 Radio-frequency cables
* IEC 60098 Rumble measurement on Vinyl Disc Turntables
* IEC 60099-4 Metal oxide Surge arresters without gaps for AC systems
* IEC 60099-5 Selection and Application Recommendations
* IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices
* IEC 60137 Bushings for alternating voltages above 1000V
* IEC 60146 Semiconductor Converters
* IEC 60169 Radio-frequency connectors
** IEC 60169-2 unmatched coaxial connector (Belling-Lee TV Aerial Plug)
** IEC 60169-8 BNC connector, 50 ohm
** IEC 60169-9 SMC connector, 50 ohm
** IEC 60169-10 SMB connector, 50 ohm
** IEC 60169-15 SMA connector, 50 ohm
** IEC 60169-16 N connector, 50 ohm or 75 ohm
** IEC 60169-16 TNC connector, 50 ohm
** IEC 60169-24 F connector, 75 ohm
* IEC 60179 Sound Level Meters
* IEC 60204 Safety of machinery
* IEC 60214 On-load tap changers
* IEC 60228 Conductors of insulated cables
* IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment
* IEC 60238 Edison screw lampholders
* IEC 60255 Electrical Relays
* IEC 60268 Sound system equipment
** IEC 60268-1 General
** IEC 60268-2 Explanation of general terms and calculation methods
** IEC 60268-3 Amplifiers
** IEC 60268-4 Microphones
** IEC 60268-5 Loudspeakers
** IEC 60268-6 Auxiliary passive elements
** IEC 60268-7 Headphones and earphones
** IEC 60268-8 Automatic gain control devices
** IEC 60268-9 Artificial reverberation, time delay and frequency shift equipment
** IEC 60268-10 Peak programme level meters
** IEC 60268-11 Application of connectors for the interconnection of sound system components
** IEC 60268-12 Application of connectors for broadcast and similar use
** IEC 60268-13 Listening tests on loudspeakers
** IEC 60268-14 Circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
** IEC 60268-16 Objective rating of speech intelligibility by speech transmission index
** IEC 60268-17 Standard volume indicators
** IEC 60268-18 Peak programme level meters - Digital audio peak level meter
**IEC 60270:2000 "High-Voltage Test Techniques - Partial Discharge Measurements"
* IEC 60287 Calculation of permissible current in cables at steady state rating
* IEC 60296 Mineral Insulating oils for transformers & switchgear
*IEC 60297 19-inch rack
* IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
* IEC 60317 Specifications for particular types of winding wires
* IEC 60320 Appliance couplers for household and similar general purposes
* IEC 60331 Tests for Electric Cables under Fire Conditions
* IEC 60335 Safety of electrical household appliances
* IEC 60364 Electrical installations of buildings
* IEC 60386 Method of measurement of speed fluctuations in sound recording and reproducing equipment
* IEC 60417 Graphical symbols for use on equipment
* IEC 60439 Low voltage switchgear and controlgear assemblies - "Part 1:Type-Tested and partially type tested assemblies"
* IEC 60445 Basic and safety principles for man-machine interface
* IEC 60446 Wiring colours
* IEC 60529 Degrees of protection provided by enclosures (IP Code)
* IEC 60574 Audio-visual, video and television equipment and systems
* IEC 60598-1 Luminaires: General Requirements
* IEC 60559: 1989 Binary floating-point arithmetic for microprocessor systems (equivalent to IEEE 754-1989)
* IEC 60694 Common clauses for high-voltage switchgear and control gear standards
* IEC 60601-1 Medical Electrical Equipment — Part 1: General Requirements for Safety.
** IEC 60601-1-1 Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical system.
** IEC 60601-1-2 Medical electrical equipment - Part 1-2 : General requirements for safety - Section 2: Collateral standard: Electromagnetic compatibility - Requirements and tests.
** IEC 60601-1-4 Medical Electrical Equipment - Part 1-4: General Requirements for Safety - Collateral Standard. Programmable Electrical Medical Systems.
** IEC 60601-1-8 Medical Electrical Equipment - Part 1-8: General Requirements for Safety - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems. First edition in August 2003
** IEC 60601-1-9 Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design. First Edition Jul 2007
* IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
** IEC 60603-2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features
** IEC 60603-7-1: Connectors for electronic equipment — Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality
** IEC 60603-7-2: Connectors for electronic equipment — Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
** IEC 60603-7-4: Connectors for electronic equipment — Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
** IEC 60603-7-5: Connectors for electronic equipment — Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
** IEC 60603-7-7: Connectors for electronic equipment — Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz
* IEC 60617 Graphical symbols for diagrams
** IEC 60617-12 Binary logic elements
* IEC 60651 Sound level meters
* IEC 60694 High-voltage switchgear. Common specifications
* IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations.
* IEC 60721 Classification of environmental conditions
* IEC 60726 Dry type power transformers
* IEC 60747 Semiconductor devices
* IEC 60748 Semiconductor devices - integrated circuits
* IEC 60774 VHS/S-VHS video tape cassette system
* IEC 60793 Optical fibres
* IEC 60825 Laser safety
* IEC 60812 - International Standard on Fault Mode and Effects Analysis
* IEC 60870 Telecontrol equipment and systems
**IEC 60870-1 General considerations
**IEC 60870-2 Operating conditions
**IEC 60870-3 Interfaces (electrical characteristics)
**IEC 60870-4 Performance requirements
**IEC 60870-5 Transmission protocols
***IEC 60870-5-101 Companion standard for basic telecontrol tasks
***IEC 60870-5-102 Companion standard for the transmission of integrated totals in electric power systems
***IEC 60870-5-103 Companion standard for the informative interface of protection equipment
***IEC 60870-5-104 Network access for IEC 60870-5-101 using standard transport profiles
**IEC 60870-6 Telecontrol protocols compatible with ISO and ITU-T recommendations
* IEC 60874 Connectors for optical fibres
* IEC 60884 Plugs and socket-outlets for household and similar purposes:: Defines general requirements of such plugs and sockets. The many particular forms used in different countries are listed in IEC/TR 60083 (formerly IECEE CEE-7).
* IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes
** IEC 60906-1: Plugs and socket-outlets 16 A 250 V AC
**:This is the system the IEC recommends as the worldwide standard for countries using 220-240 V AC. Switzerland uses already a very similar plug.
** IEC 60906-2: Plugs and socket-outlets 15 A 125 V AC
**: This is the system used in the United States, Canada, and Japan.
** IEC 60906-3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, AC and DC
* IEC 60908 Compact disk digital audio system
* IEC 60921 Ballasts for tubular fluorescent lamps - Performance requirements
* IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
* IEC 60945 Maritime Navigation and Radiocommunication Equipment and Systems - General Requirements - Methods of Testing and Required Test Results
* IEC 60947 Standards for low-voltage switchgear and controlgear
* IEC 60950 Safety of information technology equipment
* IEC 61000 Electromagnetic compatibility (EMC)
** IEC 61000-2-1: Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
** IEC 61000-2-7: Environment - Low frequency magnetic fields in various environments
** IEC 61000-2-9: Environment - Description of HEMP environment. Radiated disturbance. Basic EMC publication
** IEC 61000-2-10: Environment - Description of HEMP environment. Conducted disturbance
** IEC 61000-3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
** IEC 61000-3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
** IEC 61000-3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
**IEC 61000-3-6: Limits - Assessment of emission limits for distorting loads in MV and HV power systems
** IEC 61000-3-7: Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems
** IEC 61000-3-8: Limits - Guide to signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels
** IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
** IEC 61000-4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
** IEC 61000-4-2: Testing and measurement techniques - Electrostatic discharge immunity tests. Basic EMC publication
** IEC 61000-4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
** IEC 61000-4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test. Basic EMC publication
** IEC 61000-4-5: Testing and measurement techniques - Surge immunity test
** IEC 61000-4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
** IEC 61000-4-8: Testing and measurement techniques - Power frequency magnetic field immunity test. Basic EMC publication
** IEC 61000-4-9: Testing and measurement techniques - Pulse magnetic field immunity test. Basic EMC publication
** IEC 61000-4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test. Basic EMC publication
** IEC 61000-4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests. Basic EMC publication
** IEC 61000-4-12: Testing and measurement techniques - Oscillatory waves immunity test. Basic EMC publication
** IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at A.C. power port, low frequency immunity tests
** IEC 61000-4-14: Testing and measurement techniques - Voltage fluctuation immunity test
** IEC 61000-4-15: Testing and measurement techniques - Flickermeter. Functional and design specifications. Basic EMC publication
** IEC 61000-4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
** IEC 61000-4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
** IEC 61000-4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances
** IEC 61000-4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
** IEC 61000-4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems
** IEC 61000-4-27: Testing and measurement techniques - Unbalance, immunity test
** IEC 61000-4-28: Testing and measurement techniques - Variation of power frequency, immunity test
** IEC 61000-4-29: Testing and measurement techniques - Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
** IEC 61000-4-30: Testing and measurement techniques - Power quality measurement methods
** IEC 61000-5-1: Installation and mitigation guidelines - General considerations. Basic EMC publication
** IEC 61000-5-2: Installation and mitigation guidelines - Earthing and cabling
** IEC 61000-5-5: Installation and mitigation guidelines - Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
** IEC 61000-5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)
** IEC 61000-6-1:Generic standard -EMC - Susceptibility - Residential, Commercial and Light industry
** IEC 61000-6-2: Generic standard - EMC - Susceptibility - Industrial
** IEC 61000-6-3: Generic standard - EMC - Emissions - Residential,Commercial and Light industry
** IEC 61000-6-4: Generic standard - EMC - Emissions - Industry
** IEC 61000-6-6: Generic standards - HEMP immunity for indoor equipment
* IEC 61010-1: Safety requirements for electrical equipment for measurement, control and laboratory use, Part 1 general requirments.
** IEC 61010-2-010 Part 2-010: Particular requirements for laboratory equipment for the heating of materials
** IEC 61010-2-020 Part 2-020: Particular requirements for laboratory centrifuges
** IEC 61010-2-032 Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
** IEC 61010-2-040 Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
** IEC 61010-2-051 Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
** IEC 61010-2-061 Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
** IEC 61010-2-081 Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
** IEC 61010-2-081am1 Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
** IEC 61010-2-101 Part 2-101 Particular requirements for in vitro diagnostic (IVD) medical equipment.
* IEC 61043 Sound intensity meters with pairs of microphones
* IEC 61131 PLC programming.
** IEC 61131-3 defining PLC programming languages.
* IEC 61149 Safety of mobile radios
* IEC 61158 Digital data communications for measurement and control - Fieldbus for use in industrial control systems
** IEC 61158-SER Digital data communications for measurement and control - Fieldbus for use in industrial control systems - ALL PARTS
** IEC 61158-1 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 1: Overview and guidance for the IEC 61158 series
** IEC 61158-2 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition
** IEC 61158-3 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition
** IEC 61158-4 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification
** IEC 61158-5 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
** IEC 61158-6 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification
* IEC 61162 Maritime navigation and radiocommunication equipment and systems
** IEC 61162-1 Single talker and multiple listeners
** IEC 61162-2 Single talker and multiple listeners, high-speed transmission
** IEC 61162-4 Multiple talkers and multiple listeners
*** IEC 61162-400 Ship systems interconnection - Introduction and general principles
*** IEC 61162-401 Ship systems interconnection - Application profile
*** IEC 61162-410 Ship systems interconnection - Transport profile requirements and basic transport profile
*** IEC 61162-420 Ship systems interconnection - Companion standard requirements and basic companion standards
* IEC 61280 Field testing method for measuring single mode fibre optic cable
* IEC 61286 Character set with electrotechnical symbols (ISO-IR 181 [http://www.itscj.ipsj.or.jp/ISO-IR/181.pdf] )
* IEC 61355 Classification and designation of documents for plants, systems and equipment
* IEC 61400 Wind turbines
** 61400-1: Design requirements
** 61400-2: Design requirements for small wind turbines
** 61400-3: Design requirements for offshore wind turbines
** 61400-11: Acoustic noise measurement techniques
** 61400-12: Wind turbine power performance testing
** 61400-12-1: Power performance measurements of electricity producing wind turbines
** 61400-13: Measurement of mechanical loads
** 61400-14: Declaration of apparent sound power level and tonality values
** 61400-21: Measurement and assessment of power quality characteristics of grid connected wind turbines
** 61400-23: Full-scale structural testing of rotor blades
** 61400-24: Lightning protection
** 61400-25: Information and information exchange for wind power plants [IEC61850]
*** 61400-25-1: Communications for monitoring and control of wind power plants – Overall description of principles and models
*** 61400-25-2: Communications for monitoring and control of wind power plants – Information models
*** 61400-25-3: Communications for monitoring and control of wind power plants – Information exchange models
*** 61400-25-4: Communications for monitoring and control of wind power plants – Mapping to communication profile
*** 61400-25-5: Communications for monitoring and control of wind power plants – Conformance testing

* IEC 61499 Function blocks
** IEC 61499-1 Architecture
** IEC 61499-2 Software tool requirements
** IEC 61499-3 Tutorial information
** IEC 61499-4 Rules for compliance profiles
* IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
* IEC 61511 Functional safety - safety instrumented systems for the process industry sector
* IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems
* IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
* IEC 61603 Infrared transmission of audio or video signals
* IEC 61643 Surge protective devices connected to low-voltage power distribution systems
* IEC 61690 Electronic design interchange format, EDIF
** IEC 61690-1 Version 3 0 0
** IEC 61690-2 Version 4 0 0
* IEC 61784 Digital data communications for measurement and control
** IEC 61784-1 Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
* IEC 61800 Adjustable speed electrical power drive systems
* IEC 61850 Communication Networks and Systems in Substations
* IEC 61966 Multimedia systems -- Colour measurement
** IEC 61966-2-1 sRGB default RGB colour space
** IEC 61966-2-4 xvYCC, the extended-gamut YCC colour space
* IEC 61968 Application integration at electric utilities – System interfaces for distribution management
* IEC 61970 Application integration at electric utilities – Energy management system application program interface (EMS-API)
* IEC 62040 Uninterruptible power systems
** IEC 62040-1 General and safety requirements for UPS used in operator access areas
** IEC 62040-2 Electromagnetic compatibility (EMC) requirements
** IEC 62040-3 Method of Specifying the Performance and Test Requirements
* IEC 62056 DLM/COSEM communication protocol for reading utility meters
* IEC 62196 Plugs and sockets for charging electric vehicles
* IEC 62264 Enterprise-control system integration
* IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
* IEC 62270 Hydroelectric power plant automation - Guide for computer-based control
* IEC 62271 Standards for high-voltage switchgear and controlgear
** IEC 62271-100 High-voltage alternating current circuit breakers
** IEC 62271-102 Alternating current disconnectors and earthing switches
** IEC 62271-107 AC Fuse Switches 1-52kV
** IEC 62271-200 AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
** IEC 62271-203 Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above
* IEC 62278 Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
* IEC 62304 Medical Device Software - Software Life Cycle Processes
* IEC 62351 Power System Control and Associated Communications - Data and Communication Security
** IEC 62351-1: Data and Communication Security – Introduction
** IEC 62351-2: Data and Communication Security – Glossary of Terms
** IEC 62351-3: Data and Communication Security – Profiles Including TCP/IP
** IEC 62351-4: Data and Communication Security – Profiles Including MMS
** IEC 62351-5: Data and Communication Security – Security for IEC 60870-5 and Derivatives (i.e. DNP 3.0)
** IEC 62351-6: Data and Communication Security – Security for IEC 61850 Profiles
** IEC 62351-7: Data and Communication Security – Security Through Network and System Management
** IEC 62379-1: Common control interface for networked digital audio and video products-General
* IEC 62443 Industrial communication networks - Network and system security (DRAFT)
** IEC 62443-1 Terminology, concepts and models
** IEC 62443-2 Establishing an industrial automation and control system security program
** IEC 62443-3 Operating a manufacturing and control systems security program
** IEC 62443-4 Specific security requirements for manufacturing and control systems
** IEC 62443-5 Security technologies for industrial automation and control systems

ee also

* The list of ISO standards covers also those jointly published by ISO and IEC.

* List of IEC Technical Committees

References

External links

* [http://webstore.iec.ch/ Search IEC catalogue]