Clock distribution network

Clock distribution network

In a synchronous digital system, the clock signal is used to define a time reference for the movement of data within that system. The clock distribution network (or clock tree, when this network forms a tree) distributes the clock signal(s) from a common point to all the elements that need it. Since this function is vital to the operation of a synchronous system, much attention has been given to the characteristics of these clock signals and the electrical networks used in their distribution. Clock signals are often regarded as simple control signals; however, these signals have some very special characteristics and attributes.

Contents

Considerations for clock signals

Clock signals are typically loaded with the greatest fanout and operate at the highest speeds of any signal, either control or data, within the entire synchronous system. Since the data signals are provided with a temporal reference by the clock signals, the clock waveforms must be particularly clean and sharp. Furthermore, these clock signals are particularly affected by technology scaling (see Moore's law), in that long global interconnect lines become significantly more resistive as line dimensions are decreased. This increased line resistance is one of the primary reasons for the increasing significance of clock distribution on synchronous performance. Finally, the control of any differences and uncertainty in the arrival times of the clock signals can severely limit the maximum performance of the entire system and create catastrophic race conditions in which an incorrect data signal may latch within a register.

The clock distribution network often takes a significant fraction of the power consumed by a chip. Furthermore, significant power can be wasted in transitions within blocks, even when their output is not needed. These observations have led to a power saving technique called clock gating, which involves adding logic gates to the clock distribution tree, so portions of the tree can be turned off when not needed (when a clock can be safely gated may be determined either through automatic analysis of the circuit, or specified by the designer). The exact savings are very design dependent, but around 20-30% is often achievable.

Performance of clocked systems

Most synchronous digital systems consist of cascaded banks of sequential registers with combinational logic between each set of registers. The functional requirements of the digital system are satisfied by the logic stages. The global performance and local timing requirements are satisfied by the careful insertion of pipeline registers into equally spaced time windows to satisfy critical worst-case timing constraints. The proper design of the clock distribution network ensures that these critical timing requirements are satisfied and that no race conditions exist (see also clock skew).

The delay components that make up a general synchronous system are composed of the following three individual subsystems: the memory storage elements, the logic elements, and the clocking circuitry and distribution network. Interrelationships among these three subsystems of a synchronous digital system are critical to achieving maximum levels of performance and reliability.

Ongoing research

Novel structures are currently under development to ameliorate these issues and provide effective solutions. Important areas of research include resonant clocking techniques, on-chip optical interconnect, and local synchronization methodologies.

References


Adapted from Eby Friedman's column in the ACM SIGDA e-newsletter by Igor Markov
Original text is available at http://sigda.org/newsletter/2005/eNews_051201.html


See also


Wikimedia Foundation. 2010.

Игры ⚽ Поможем решить контрольную работу

Look at other dictionaries:

  • Clock signal — In electronics and especially synchronous digital circuits, a clock signal is a particular type of signal that oscillates between a high and a low state and is utilized like a metronome to coordinate actions of circuits. Although the word signal… …   Wikipedia

  • Clock skew — Contents 1 In circuit design 1.1 Harmful skew 1.2 Beneficial skew 2 On a network 3 Interfaces …   Wikipedia

  • Clock Tower (video game) — Clock Tower Japanese cover art Developer(s) Human Entertainment Publisher(s) H …   Wikipedia

  • Power network design (IC) — In integrated circuits, electrical power is distributed to the components of the chip over a network of conductors on the chip. Power network design (IC) includes the analysis and design of such networks. As in all engineering, this involves… …   Wikipedia

  • Passive optical network — A passive optical network (PON) is a point to multipoint, fiber to the premises network architecture in which unpowered optical splitters are used to enable a single optical fiber to serve multiple premises, typically 32 128. A PON consists of an …   Wikipedia

  • National Broadband Network — The National Broadband Network (NBN) is a national wholesale only, open access data network under development in Australia. Up to one gigabit per second connections are sold to retail service providers (RSP), who then sell Internet access and… …   Wikipedia

  • Radio clock — A radio clock is a clock that is synchronized by a time code bit stream transmitted by a radio transmitter connected to a time standard such as an atomic clock. Such a clock may be synchronized to the time sent by a single transmitter, such as… …   Wikipedia

  • Game Show Network — GSN redirects here. For other uses, see GSN (disambiguation). Game Show Network, LLC (GSN) Launched December 1, 1994 Owned by DirecTV (60%) Sony Pictures Television (40%) Picture format …   Wikipedia

  • Atomic clock — Nuclear clock redirects here. For the clock as a measure for risk of catastrophic destruction, see Doomsday Clock. For a clock updated by radio signals (commonly but inaccurately called an atomic clock ), see Radio clock. For the album by Zion I …   Wikipedia

  • Speaking clock — A speaking clock service is used by people who wish to know the correct and accurate time. Speaking clock services are most commonly accessed by telephone.The format of the service is somewhat similar to those in radio time signal services. Every …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”