- Free flight (air traffic control)
Free flight is a developing
air traffic controlmethod that uses no centralized control (e.g. air traffic controllers). Instead, parts of airspace are reserved dynamically and automatically in a distributed way using computer communication to ensure the required separation between aircraft. This new system may be implemented into the U.S. air traffic control system in the next decade. Its potential impact on the operations of the national airspace system is disputed, however.
What is Free Flight?
Free flight is a new concept being developed to take the place of the current air traffic management methods through the use of
technology. True free flight eliminates the need for Air Traffic Controllers by giving the responsibility to the pilot in control. This gives the pilot the ability to change trajectoryin mid-flight. With the aid of computer systems and/or ATC, pilots will be able to make more flight path decisions independently. As in most complex systems, distributed yet cooperative decision making is believed to be more efficient than the centralized control characterized by the current mode of air traffic management.
Free flight began as an effort to become less dependent on the human factor and more dependent on the growing technology of its day. In the 1960's, when airliners bought jet-liners they increased the need for air traffic management (ATM). ATM created
Instrument Flight Rules(commonly known as "IFR") to manage the growing numbers of aircraft. This helped control air traffic, but required a significant amount of time, effort, and resources to maintain IFR flight.
In 1968, the
Federal Aviation Administrationissued the High Density Airport Rule to reduce the amount of aircraft in a given airport. Twenty years earlier Crocker Snow used television cameras to locate his position when flying an aircraft. He sent up signals to the aircraft so they could get a third person perspective of the aircraft’s surrounding. This idea worked but was too costly and was impractical. In the 1960's transponders removed the need to use television cameras.
Other problems that occurred in the air traffic industry were the OPEC fuel crises and the Professional Air Traffic Controllers Organization (PATCO) strike of 1982 resulting the firing of thousands of controllers by President Ronald Reagan. This showed how vulnerable air transportation was to economic forces.
The key components of free flight were identified in 1971 by United Airlines systems manager William Cotton, although the technology to implement it was not available for another two decades. [http://www.wired.com/wired/archive/4.04/es.faa.html Free Flight] ]
In the 1980's the
GPSsatellite navigation system was deployed by the US Department of Defenseand the aviation industry saw the opportunity to use GPS for potentially more efficient air traffic management capabilities through an increased use of this capability coupled with automation enabled by it.
In 1991 the
International Civil Aviation Organizationcreated the Future Air Navigation System Panel. The Panel produced descriptions of satellite-based technology applications and their use in air traffic management. A larger role emerged for "user define trajectory" that became known as "free flight" by the mid 1990's.
The first hearings on implementing free flight were held in August 1994 by Representative Collin Peterson (D-Minnesota), chair of the House subcommittee with investigative jurisdiction over the FAA.
In 1995 David Hinson, the FAA administrator, organized a task force to draw up detailed plans to implement free flight. The report, issued in October that year called for three phases; [Final report of the RTCA Task Force 3, Free Flight Implementation. RTCA, Inc., Washington, DC, Oct 26, 1995 [http://www.rtca.org/onlinecart/product.cfm?id=363] ] phase I ended at the end of 2002, the others have not been started. Free flight was patented by the FAA in 2001. [patent|US|6314362|Method and system for an automated tool for en route traffic controllers]
As of yet, true free flight applications exist only on a small scale in selected airspace operations where only the most well equipped aircraft operate such as at high altitude by commercial airliners. There are many versions of free flight being conceived for the Next Generation Air Transportation System (NGATS). The Free Flight vision is expected to slowly emerge over the next 20-30 years as NGATS emerges from billions of dollars of development, testing, careful transition planning, training, and deployment of ground-based and airborn systems by all types of aircraft. Key elements of NGATS include the
Automatic Dependent Surveillance-Broadcast(ADS-B) to be fully deployed by 2013 and what can be expected to be an ever-evolving, netcentric information application called the System Wide Information ManagementSystem or "SWIM".
The regions are broken up into unrestricted, transition, and restricted.
Unrestricted - In the unrestricted region there will be very little guidance from ATC since aircraft density will be low. Pilots will have a great deal of flexibility to exercise free flight in this area. However, it may become complicated when bad weather is calculated into the equation. Pilots may have to adjust their course to avoid inclement weather. In doing so other pilots attempting to avoid the conditions may cross path with each other. ATC will have to assist the pilots and guide them through this issue. Transition – Slightly restricted however pilots retain some flexibility to exercise free flight.
Restricted - The freedom of the pilot has been restricted significantly.
Approaches of Free Flight
There are several approaches that free flight can move towards.
In the airborne approach, everything is up to the pilots. In its truest form this is the fundamental nature free flight. The pilot is responsible for detecting and resolving problems while in flight. Computers will help aid the aircrew in this matter. Information, such as weather reports or other aircraft position, is forwarded from ATC to the aircraft so the pilots can decide the best course of action to take. The surveillance system can either be on the ground or on-board the aircraft.
Problems with this method include complete surveillance information assurance, communication with different equipment, smaller aircraft incapable of carrying the equipment, and the possibility of a system malfunctioning. It is extremely difficult to have total assurance of all air traffic. If two aircraft flying with different equipment encounter each other, the equipment’s data will have to be sent to the receiving equipment as well as the normal information such as speed. Larger planes will have no problems with the equipment but smaller aircraft will have problems communicating to each other if it lacks an essential component. Surely if this was a one on one scenario it would be easy to solve but if multiple aircraft were involved the difficulty of finding a solution compounds. Lastly, if a system fails or the software has a
programmingerror the aircraft and other aircraft will be flying blind.
All of the data is sent to ATC and pilots requests a particular flight path. Communication will be from aircraft to ATC instead of aircraft to aircraft. In this approach the aircrew will not have the full situational awareness experience in the airborne approach. Aircrew will not be able to handle uncertainties or help out with the uncertainties in this approach. If one aircraft does not follow the directive ATC issues the directive will have to be reissued and in turn increase the workload of ATM operators.
Mixed focus approach which is a combination of both the airborne and ground approach. AOC initially sends route to aircraft and ATM. If the aircrew does not like the route it sends the route changes to ATM and AOC.
Aircraft separation is divided up into the Protected Zone and the Alert Zone. In the larger zone, called the "alert zone", the system informs the aircraft through one of the three approaches that an aircraft is in the vicinity. It acts as a flag and merely alerts the aircrew. In the protected zone, the area must remain sterile of all foreign objects. It is the minimum distance anything can approach. The system should alert the aircrew before anything comes close to it but if it manages to enter the protected zone aircrew will take evasive maneuver to avoid a collision.
Conflict and detection method using Center-TRACON Automation System
TRACONAutomation System (CTAS) receives data from aircraft trajectory, atmospheric model, aircraft performance, and other contributing factors. Based on the information it receives it will calculate the best trajectory though equations and logic. CTAS is currently being used on a small scale.
Next Generation Air Transportation System
System Wide Information Management
* [http://www.jpdo.gov/ NGATS]
* [http://web.archive.org/web/20061015201334/http://www.faa.gov/nasarchitecture/blueprnt/ffp1.htm Free Flight Phase 1]
* [http://www.wired.com/wired/archive/4.04/es.faa.html Wired: "Free Flight"]
* [http://sats.nasa.gov/ Small Aircraft Transportation Systems (SATS) project] at
* [http://www.cbsnews.com/stories/2005/04/15/60minutes/main688454.shtml CBSNews:"Flying Cars Ready To Take Off"]
Wikimedia Foundation. 2010.